Free DC Energy _The worlds biggest kept secret

[Flying Pyramid]

Instead of unintentionally hijacking Gregor's thread about pyramid power and advanced mathematics i started this one.

There are a few posts on "Free Energy" and a few on debunking free energy.
So allow me to put it to rest right now.
FREE DC ENERGY does exist. It is a reality and YES it's free.
As long as we, the ground crew +, keep it free.

How do we keep it free?

By telling everyone in the world who will listen how it's made.
Keep the knowledge free and there can never be a price put upon it.

Here is the problem:
The true power of what most of us know will never be released until after the 2012 event. Only then will mankind as a whole except where and how we came across this technology.
Yes i know the secret to free everlasting free standing free dc energy but no matter what i do it will not be accepted by anyone as a valued energy source because i can not lie about where i got the information, and that caused my utter downfall a year and a half back.

Alright screw it, i'll just tell you all the truth about me:
It's to close to our time for me to be afraid any longer.

My name is Richard Scott Brooks.
In early 2006 i built a company called REVOLUTIONS inc. and a 3D animation studio called Flying Pyramid Studios, rightly named after the tech of how i came across this energy. In late 2006 after meeting a man i will refer to as "The Doctor" i tried to mass e-mail the entire world, using my company, with the technology of how to create free dc energy.
The e-mail never made it, my company was seized and shut down, i was driven from my home and have been living off the grid since then.

I recently rebuilt my company & studio and even though they threatened to eat my soul, here i am at it again.

What is FREE DC ENERGY?

Free Direct Current Energy is created by using the earths rotation and coupled together with raw magnetite.
Now you already know about the various magnet motors and other type engines, but these are still not efficient enough to power a entire city and they still need energy to start them.
Yes this is a huge step in the right direction but not big enough.

I found this information studying crop circles, the planet, the properties of true raw magnetite, the universe and ancient cultures.

Quite simply here it is at it's basic form:
First you must understand the governing bodies of a physical universe which are angular momentum and centrifugal force.
Everything in our universe including the universe itself spins and rotates (with the exception of the moon which i will address in a minute.)
Now look at the mechanics of magnets.
At there core what are they?
Mineral deposits that have 99% of there ions facing the same direction which attracts and repels others like it positive/negative.
Alot like a human huh?
Now we already know that if you file raw magnets into simple geometric shapes and place them together in a particular arrangement they do fantastic things. This particular arrangement that i'm about to tell you about is only one use.

What are the pyramids?
Well that is a complicated question as they are multi-purpose.
But i will answer a few basics.
1.) They are a blueprint of where our planet upwells energy from.
2.) They show us how to harness that natural energy.
3.) They are/were jump-gates.
4.) They are machines for self ascension (for those who chose not to wait and do it naturally)

Now place the two together.

Every magnet on this planet has a north and south polarity. +/_
However if you make a solid pyramid magnet the exact same shape and dimensions as the Giza pyramid (angles at 22.5 degrees) something weird happens to it.
If you take it above the equator it will take on a solid northern polarity.
If you take it below the equator it will take on a solid southern polarity.
No other magnet on the planet will do this.
So after looking at all the "trinity" theories and the power of 3 and after long hours of crop circle studies it hit me.
I will try to post some pics to back up what i'm saying later.
But look at the most round like cropcircles and what do you see?
3 solid magnet balls notched on 4 sides at 19.5 degrees.
Hmmm.....we have a pyramid magnet at 22.5 degrees and 3 ball magnets at 19.5 degrees.....where have i seen this before...AH HA!!
The pyramids at Giza are angled at 22.5 degrees, the earths true north and south. The little one is offset at 19.5 degrees.

So Simply place the three ball magnets with north facing north and south facing south and arrange them in a perfect Isosceles triangle the width of the very middle of your pyramid magnet. Now place the pyramid magnet point down in the center of the balls.
The pyramid will levitate and begin to spin for the same reason water spins in your drain, the earths rotation.
Congratulations you've just created perpetual motion that will never stop.
As each corner of the pyramid passes the notch of the balls dc energy will spark from the bottom of the pyramid. As it's speed increases so does the charge.

Congratulations you've just created a self propelling never ending energy source that will never deplete and needs nothing to start.
This is the biggest kept secret on the planet.

Upgrade that basic system and you will create the propulsion system of most of the starships in use today. Why? Because magnetite, just like gold, is a universal mineral that shows up on almost every planet in existence.
There is so much magnetite on this planet you could never ever run out especially because we would never need to use that great of an amount.

Uh oh, looks like i gotta run, i'll try to get back on later today or tomorrow and finish.

Thank you.
Peace, Love & Light

"When the power of love overcomes the love of power the world shall know peace."

[Baggywrinkle]

Okay, Richard, I'll bite.

I'm a nuts and bolts kind of a guy.

Lets build a small one that will run an LED light and showcase it here on Avalon as proof of concept.

You might also cc copies to Keelynet. I'm sure they would be interested also - in a practical way.

If it really works, I'll do this instead of the savonious rotor I'm looking at...

Your off grid lifestyle is powered by this concept?

Cheers

Don

[Operator]

Hi,

Just subscribed to this thread too .... keep it coming !

Cheers

[Elephant Man]

I'm no techie, but this sounds interesting.... waiting patiently for continuation :o)

peace

[DoctorWho]

In late 2006 after meeting a man i will refer to as "The Doctor" i tried to mass e-mail the entire world, using my company, with the technology of how to create free dc energy.
The e-mail never made it, my company was seized and shut down, i was driven from my home and have been living off the grid since then.


Just to clarify, I am not "the Doctor' he's referring to. Just making things clear as I use it here as part of my nickname.
Bill "the Doctor"

[Steven]

This is very interesting. It also fits my personal understanding of the possibilities shaped magnet, shaped coils, and pyramid proportioned with phi opens up to perpetual motion.

I can see the probabilities of this concept to bring about perpetual motion, but my interrogation remains; can it be loaded? How much power it can deliver if loaded? What is the proportion of the device versus the outcome power? In other words, how much power remains after the device consume its necessary power to maintain perpetual motion?

Thank you very much for sharing this, I'll be looking for more to come, keep posting!:thumb_yello: Steven

[David]

There has been lots of research into perpetual motion machines with magnets including the TPP Pyramid Project. However promising, no sure thing as been created yet.


Check out this website:

http://www.overunity.org.uk/

[SuperManny]

OK, you got my attention!

I LOVE this kinda stuff! :)

Looking forward to part 2 and maybe some pics.

Also sources where we could get the magnets needed, would be fantastic!

[David]

Hi supermanny, a good source of magnets can be obtained here.

http://www.kjmagnetics.com

[J_rod7]

*
***
*******

Flying Pyramid,

I have a Degree in Electronics, and a background from the Navy in Nuclear Engineering.

I would like to see Schematics, Diagrams, and materials of construction for this Device. Could you provide this? :thumb_yello:

Is any of this available on any website?

*******
***
*

[David]

Hi J_rod7, I also have an electrical engineering degree and questioned the validity of the claim when no data has been provided to back it up.

David

[Peter]

Thankx Flying Pyramid, we're setting up a hydroelectric system at the moment we also have a wind turbine project and I'm looking into the Joecell for the car. Like the others above I'd love to have more info on your discovery.
In Anticipation, Peter.

Keep on keeping on.

[ophiuchus]

i was given a similar theory 35 years ago and would be interested with sharing it with like minded. please continue.

[Dantheman62]

I would like to see pictures of raw magnetite and pictures of the actual setup, Neodymium magnets can't be machined and are somewhat brittle.And how do you take DC voltage and current readings off of a spinning magnet? And you mentioned that it won't be released until after the 2012 event, but what if nothing happens say for the 2012 event? just in :mfr_omg:case.

[GenerationIke]

This is what George Adamski said the Aliens who were visiting him powered their ships with. The three balls that you also describe sound very much like the ones pictured in one of his snapshots of their craft.

I'll have to read more carefully and see if I can do this, too.

[SuperManny]

Hi supermanny, a good source of magnets can be obtained here.

http://www.kjmagnetics.com
Thanks for the link. They've got spheres, but I couldn't find any pyramids.

However for a $150 customization fee, they can make any shape you like.:original:

[SpeedAdict]

Well ill bite this one too..
Im a Ph.D Electronic Engineer and have a lot of cuestion for you.. Understanding the basic and advance magnetism, sounds interesting.

I have publicated several works on electro-magnetism here in my
University, and they are right now making a model to work with in the lab..

One student that is very bright, told me that he was also working in a model
of perpetual motion, involving spheres and piramyd.. I was :shocked: because he is only 20 years old, and catch up with my work of many many years of lab testing, investigation, etc..

Some blueprints, pics, will be VERY appreciated.. Keep up! :thumb_yello:

[Heretic]

KEWEL

definitely interested

I am all ears...er eyes

[DJModer]

I would like to see pictures of raw magnetite and pictures of the actual setup, Neodymium magnets can't be machined and are somewhat brittle.And how do you take DC voltage and current readings off of a spinning magnet? And you mentioned that it won't be released until after the 2012 event, but what if nothing happens say for the 2012 event? just in :mfr_omg:case.

I believe Neodymium powder can be molded to many different shapes and then magnetized to form a magnet.

I still want to know how he extract DC voltage out of a spinning magnet.

[Peer]

I'd like to see some blueprints as well.
I'll start constructing tomorrow.

[Dantheman62]

Hello Flying Pyramid, are you there? or is this one of those threads that never gets answered? Are you waiting to get more responses before you answer?:smoke:

[TranceAm]

I still want to know he take DC voltage out of a spinning magnet.

:lmfao:

[Antaletriangle]

I really hope you genius guys on here can get something up and running-when i was a kid i came across a broken magnet from a loudspeaker and it was broken so i placed one on a toy truck and the other (oppositely polarised) i placed behind it and pushed the magnets obviously repelled each other and the truck would move but i couldn't get to grips with how i could somehow keep the magnets at the same distance apart to keep the truck moving without using kinetic energy from my pushing the rear magnet behind the front to move the truck-i thought there was something in magnetism then-children always come across stuff but need a helping hand in modification.This could be some answer-i hope so.Great thread!

[TranceAm]

I really hope you genius guys on here can get something up and running-when i was a kid i came across a broken magnet from a loudspeaker and it was broken so i placed one on a toy truck and the other (oppositely polarised) i placed behind it and pushed the magnets obviously repelled each other and the truck would move but i couldn't get to grips with how i could somehow keep the magnets at the same distance apart to keep the truck moving without using kinetic energy from my pushing the rear magnet behind the front to move the truck-i thought there was something in magnetism then-children always come across stuff but need a helping hand in modification.This could be some answer-i hope so.Great thread!

Yes, tanks and riding machine guns under contrl of madmen will be propelled by this genius invention, when we run out of gasoline. Read your own signature. The one having the answer and giving it will surely be as sorry as Alfred Nobel.. Maybe fund his own yearly award for stupidity.

[Antaletriangle]

Yeah i'm sorry to say you're right there Trance it's such a shame that the inevitability of most quality inventions/discoveries end up being used for ill gotten gain.I just get EXCITED when i hear of such info.-hope,as long as there's hope...

[TranceAm]

Yeah i'm sorry to say you're right there Trance it's such a shame that the inevitability of most quality inventions/discoveries end up being used for ill gotten gain.I just get EXCITED when i hear of such info.-hope,as long as there's hope...

And I am right with you there.. It is exiting.. However, noting without unintended consequences... As Alfred Nobel noticed with his brain child.

First Efields dream and hope has to come true. And when Mankind finally makes up its collective mind what to do with the madmen and crazy lunatics, it is allowed to choose from as its leaders..
You know the ones that want to enslave/kill/sacrifice others inspite of equality for national, political, religious or pure individual gains .. THEN we can work out these plans for the benefits of all mankind instead of a few.

History ONLY repeats if we ALLOW that to happen! (Alfred this one was for you.)

[Flying Pyramid]

Hello and thank you.

So first off let me answer a few basic questions that i'm sure everyone wants to know.

1.) No, i am not now nor have i ever been, (at least to my knowledge), part of any government or military projects either earth based or off planet.

2.) No, i have not, (again, as to my knowledge), been visited or aboard any alien vessels. I have not had contact with any alien race that i can recall. Yes, there are huge gaps spanning years that are missing from my life that i personally can't remember, but friends and familiy confirm that i was around just very "high". 25 years of mushrooms, acid & pot have left me foggy on some aspects of my life.

3.) No, what i say here can not be "proven" by me, however there is no rules that say it can not be "re-discovered" by you.

4.) No, i can not explain how i know what i know. The gaps of my life and the "conversation" that i had with whoever when i was 12 holds the key.
I'm still working on recovering them. I am being pulled towards arizona for some reason i don't know perhaps i'll find some answers there.

5.) Yes, i am bound by certain rules handed down by the one true god, you!

6.) Don't ask me about number 5, some of you already have posted the answer.

7.) No, i will never build anything i show you. Why? Your rules not mine.
But like i said there are no rules that say you can't do it.

8.) My purpose at this time is only to spread the knowledge of Free DC Energy and it's possabilities to the world before the ascension.

9.) No, at least at this time, i am not in any way psychically capable of anything. It ties in with the conversation when i was 12. I was bound by mankind until the time of ascencion.

10.) Yes, all that i say can very easily be discredited by the way i have lived my life. But so can alot of us. I posted this 2 days ago and allready a good percentage of you know what i'm talking about. That's proof enough for me.

11.) Yes, as of the last 3 years i have lived my life homeless and off the grid. I carry a highly modified laptop with me everywhere i go.
As of now all my businesses are online and sitting silent until i decide what is the best course of action in the days to come.

How did i come across Free DC Energy Researching crop circles?
Well it's a little more complicated than that.
After meeting the doctor, who was send to awaken me, he laid the ground work of the grand design, who i was to become, where we stood as a spiritual race, our true past & destiny, free dc energy, the mechanics of how spaceships were and how time and seperate timelines played a role in our exsistance.
It was the doctor who downloaded the info in my brain.
After that initial conversation, when i would listen to him, i started to see things in crop circles and ancient symbols that seemed familiar to me.
Patterns, the same patterns that i see when i'm tripping.
I discovered exponential energy from 2 of the crop circles dipicting the free dc energy schematic. After that it started to landslide in my head.
Starship dynamics, how to raise consiousness, and a slew of other knowledge started to reveal itself to me everywhere i looked. You can see it everywhere, company logos, school text books, manhole covers, money, peoples iris's, food, and espeacially nature, this is how i began to understand the playout of higher energy forces and how they effect lower energy levels. literally everywhere.

So, i have a well of knowledge i wish to share with the world but by doing so i am sealing my own fate, but if mankind benifits from this knowledge and everyone makes the right decicion, then my fate is destiny.
Unfortunetly i could not locate the particular crop circles i wanted to show you but i found them in a book labeled "Crop Circles" published by "Berkely Press" The one below is displayed on the front cover.
Also extensive research was done on the Giza pyramids and there angle, placement, offsetness and thier creation time went into the following discoveries.

The DC Energy is exactly as i stated, file a raw magnetite magnet into the same shape as the Giza pyramid angled at 22.5 degrees. Place it point down in the center of 3 solid ball magnets notched at 19.5 degrees on 4 sides. (there is a cc like this but i could not locate it, maybe you can.)
All this is, is a giant stater on a lawnmower. Two magnets pass each other and create a spark. So, as the corner of the pyramid passes a notch energy will form and spark from the bottom of the pyramid.
How do i know, i touched it and landed on my ass!
It is simple sience. The first few gov ships in the 50's were powered by these means, there are diagrams somewhere on the net, they escape my memory at the moment.

So take your newly discovered DC generator and take it to the next level.

What do you see in the following image?

http://i15.photobucket.com/albums/a397/mrhobby/uk2000ef.jpg

It is a pointed object spinning at high revolutions inside a circular object that is hollowed out at 19.5 degrees. (useing pi as a reference)
A quick note on cc" you must pay attention to the wheat/grass that is flattened. This is very important. The way the grass is laid is the key to seeing what is in plain site.

How do you do this?

Make 3 solid raw magnetite ball and cut them in half.
Hollow each one until you have 6 bowls hollowed out at 19.5 degrees.
Take two pyramid magnets and place them together point to point and you will have a tetrahedron. (obviously you would have to carve it into a tetrahedron from raw material.)
Make the tetra slightly smaller than the inside of the balls.
So that when you place the pyramids into one have of the ball the points will barely not touch the inside walls.
So so far you have 6 half bowls hollowed at 19.5 degrees and 3 tetrahedrons whos points are angled at 22.5 degrees.
Place the 3 stars into the ball halfs and place the tops on the bottoms.

Now a little magnet lesson:
Remember how the pyramid magnet acts when you move above and below the earths equator? Well check this out.
When the balls are whole they have a north and south polarity.
After cutting them in half each half now has a north and a south.
Place that star inside one of those balls, go to put the other half back on and it wil SNAP back together and become whole again with only one north and one south as if it was never cut.

Once sealed the stars inside will try to spin in all directions at the same time, alot like the image above.
Place the 3 starballs in a perfect triangle from each other and all 3 stars will begin to spin in torward each other createing 3 distinct energy barriers.
Congradulations you've just created the drive engine for most of the starships in use today.

My time is running short so i will have to continue tomorrow.
These are just a few cc i could locate that i studied to aquire such knowledge.

Peace, Love & Light

http://i15.photobucket.com/albums/a397/mrhobby/uk2000ef2.jpg

http://i15.photobucket.com/albums/a397/mrhobby/devilsdenwiltshire-filtered.jpg

http://i15.photobucket.com/albums/a397/mrhobby/crop_circles1.jpg

http://i15.photobucket.com/albums/a397/mrhobby/ccposter.jpg

http://i15.photobucket.com/albums/a397/mrhobby/magnetite.jpg

http://i15.photobucket.com/albums/a397/mrhobby/MagnetiteXL755.jpg

http://i15.photobucket.com/albums/a397/mrhobby/uk2000dm.jpg

[Antaletriangle]

Thankyou for this information very interesting to say the least and simple to an electrical engineer-always the simple way but it's the way you look at the problem at hand is the key.It's thought processes alot of bright people know loads about physics and the sciences but end up travelling all around the cosmos to borrow a cup of sugar when it's always been next door!

[Magii]

Can a expert / someone with the means / supple build this thing

and see if it works ?

Take a pic /draw a diagram ...
cuz so far this is the same intel u get from everyone who states theres free energy... :naughty:

[nibiru]

Thanks....
I will be working on this ...

[gordon]

I told myself I would not come back onto Avalon, here I am - Free Energy -....

- Volcanoes - Why? In some places around the lava-hear from the underground Volcano is in some places in the ocean...Wow! Really! (In a sarcastic way) You might be thinking? Yes!!! How does the *water* and *lava* and *free energy* have in common???

When the water reaches the lava-heat from underground cracks underneath the ocean, it created (high powered bubbles). Ohh...Getting the picture now?

If a company somewhere could place *free spinning water turbines* just above the (high powered bubbles from the lava-heat) it would FREELY spin the (water turbines)...And producing - Free Energy -.

Thank You For Reading and/or Replying.

[Starlah]

There are a few posts on "Free Energy" and a few on debunking free energy.
So allow me to put it to rest right now.
FREE DC ENERGY does exist. It is a reality and YES it's free.
As long as we, the ground crew +, keep it free.
How do we keep it free?
[Please help us save bandwidth/quote only a small part of a long passage. The software includes a button to the quoted post. Thanks. Karen ]
I'm trying to see all of this in my mind's eye and it appears very realistic...I think I remember somewhere that magnets can be used for healing illnesses as well.

[redobb]

I watched all the rodin video's and I got all psyched, made like a smillion grids, showed them to everybody, got a bunch of ****-eyes. But anyway, I noticed that the quantum sums in the torus skin 1/8, 2/7, 4/5 created axis' x,y,z...z axis checker boards the whole grid. Furthermore, the numbers can change thier axis and the fractal properties, as well as the doubling quantums, still remain. My question is wouldn't this mean that three coils or weaves be needed and not just one? Couldn't these coils also act as the three magnets in the above description? I might be totally wrong...just thought I'd throw that out there.:original:

[Flying Pyramid]

Okay, Richard, I'll bite.

I'm a nuts and bolts kind of a guy.

Lets build a small one that will run an LED light and showcase it here on Avalon as proof of concept.

You might also cc copies to Keelynet. I'm sure they would be interested also - in a practical way.

If it really works, I'll do this instead of the savonious rotor I'm looking at...

Your off grid lifestyle is powered by this concept?

Cheers

Don

I would love someone to build this and other stuff i will post.
Unfortunetly i do not have the resources to get these objects built.
But they are real and they do work.
No, my off grid lifrstyle was not run by this means.
Everyone must take into account that with these negative entities that DO have god like power, i am not permited to make anything but as the ideas form in my head and new technologies reveal themselves to me i will post them here.
BTW, i am obviously no longer off the grid.

This is very interesting. It also fits my personal understanding of the possibilities shaped magnet, shaped coils, and pyramid proportioned with phi opens up to perpetual motion.

I can see the probabilities of this concept to bring about perpetual motion, but my interrogation remains; can it be loaded? How much power it can deliver if loaded? What is the proportion of the device versus the outcome power? In other words, how much power remains after the device consume its necessary power to maintain perpetual motion?

Thank you very much for sharing this, I'll be looking for more to come, keep posting!:thumb_yello: Steven

There is no needed energy level to maintasin motion. The motion begins due to the earths natural rotation just like water in your drain.
As to being "loaded" i'm not sure what you mean, do you mean like the coils? If so no, the pyramid and balls are not loaded, the only thing that will increase the energy output is the spinning ratio, and the next step that i will post soon "Exponential Energy" By stacking this construct coner by corner exponentially. Basically pumping the energy created from one dc generator into antother twice it size on all four corners and then repeat.

*
***
*******

Flying Pyramid,

I have a Degree in Electronics, and a background from the Navy in Nuclear Engineering.

I would like to see Schematics, Diagrams, and materials of construction for this Device. Could you provide this? :thumb_yello:

Is any of this available on any website?

*******
***
*

The actual diagram that i am showing you, no nowhere on the net is this info, however there are the resource materials that i used to discover this technology but i must relocate them.
Yes i am a graphic artist so i am working on diagrams schematics and a video presentation.

I would like to see pictures of raw magnetite and pictures of the actual setup, Neodymium magnets can't be machined and are somewhat brittle.And how do you take DC voltage and current readings off of a spinning magnet? And you mentioned that it won't be released until after the 2012 event, but what if nothing happens say for the 2012 event? just in :mfr_omg:case.

Raw manetite has been posted above and yes you could use other materials but to my understanding raw magnetite is the most powerful and most abundant.
How to measure the charge is hard to explain, the doctor possed uncanny ability to measure energy with his body and mind. He could do it with people animals and objects. It was he that did this, i do not yet have documented records of the energy produced but i can say that a small setup the size of a volkswagon bug will power a small town.
Believe me we all hope that 2012 will be overted. If nothing destructive does happen then the same thing will still happen. It's not the time or event that is controling this it's the human race and thier acceptance of this knowledge. Why did GM shredd the electric car? Get my point?

Hi supermanny, a good source of magnets can be obtained here.

http://www.kjmagnetics.com

If you call any magnetite company and ask for these exact configurations they will not agree. Trust me i have tried, "we cant do that", "that's impossable", what do you want with it", and so on.

Hello Flying Pyramid, are you there? or is this one of those threads that never gets answered? Are you waiting to get more responses before you answer?:smoke:

Again you must understand that i do not live anywhere. Me and my laptop are allways on the move. Being me is not easy by any means, and don't get me started on the mind catacombs i have to create to keep them from reading or finding me.

Can a expert / someone with the means / supple build this thing

and see if it works ?

Take a pic /draw a diagram ...
cuz so far this is the same intel u get from everyone who states theres free energy... :naughty:


Yes, anyone can build this if they have the right materials and tools.
Whether you belive it or not most of these things are willed into exsitance by the powers that be. Not many are "hand created".

So Let me be very clear on this:
This is not the super high tech version of this technology. It is the "Model T" if you will. I am not here to hand over all the secrets and all the god like powers to mankind just yet. We are still children learning how to play together without being greedy with our toys.
If i posted the secret of how to create the power of a blockhoile in the palm of your hand the next day it would destroy us because someone wanted to see it work. Yes these powers will come out within the next 3-4 years but will only be weilded by those deemed worthy by our colective mind. Only a handfull of us can weild such power and not be corrupted by it.

So again my purpose at this time is to reset our foundatiopn of technology from the B.S. tought to us in school to this natural intended foundation.
We should not be searching for "alternetive energy" we should be improving this energy. This should have been the foundation that our society is based on not the one we have today.
Free DC Energy and starships are nothing compared to the true power or where this will lead you. But what makes us wise is to knoe where to draw the line. To know that we are not ready for such things but we ARE ready to begin to rebiuld our foundation of truth.

[Flying Pyramid]

My question is wouldn't this mean that three coils or weaves be needed and not just one? Couldn't these coils also act as the three magnets in the above description? I might be totally wrong...just thought I'd throw that out there.:original:


No, the mechanics are different. Coils are meant to pull extra energy from the atmosphere around them and super charge a magnet by pumping electricity through it.
This setup is used to naturally harness the earths natual DC energy charge.
It works by the dimensions of the objects in use. So no they can not be wraped or charged in anyway as it will disrupt the natural flow of energy.
Remember that humans, the planet, the atmosphere and even space itself is positivly charged. We live in a positively charged universe.
This technology is the natural way to harness this energy to be used for our energy needs, transportation on and off world, healing, time travel, muti-dimensional travel, and so on.

[Average Joe]

There is no such thing as free energy.

Even if this theory was sound and worked, you'd have costs in setting it up and initiating it. From the mining and refining of the materials needed, to the professionals needed to plan how it works, to the building of the devices needed, to replicating it all over the world.

Like anything, you've got costs to meet, oh and wages to pay, therefore, you'd need to "sell" your free energy to be able to make the money to enable you to get it out there.

Wind energy is free. Wind costs nothing. But the turbines do!

NOTHING on this earth is free and nothing ever will be because we cannot live with out buying, selling, bartering and trading.

[Pleiadian]

:sleep_1:

[DJModer]

Flying Pyramid,

I appreciated that you share this information with us, hope that this device really work and you will greatly deserve all the credit. All the magnet parts you mentioned need to be custom made and may be expensive to build without good idea of how it works. Since you have built one before, could you suggest the magnetic material you use, how much magnetization field did you applied to the ball. If you have some drawings, photos with some dimensions, it would be a great help.

In my opinion, the first thing we need to prove is whether the pyramid magnet has only one pole. This will be a great discovery by itself if this is true. Second, according to your first and second posts, some information is not consistent (or I might not understand them correctly). In the first post, you mentioned that the balls are notched in four areas whereas in the second post, you mentioned that the ball is hollow with a tetrahedron inside. Can you verify this information? How can I tell the shape of the spinning tetrahedron in the hollow ball without seeing it?

Please continue to share information with us as we will need more guidance from you. Finally, I suggested that you also posted your invention in www.overunity.com It is a big community full of hardcore inventors that will also give this idea a try.

[zorgon]

If a company somewhere could place *free spinning water turbines* just above the (high powered bubbles from the lava-heat) it would FREELY spin the (water turbines)...And producing - Free Energy -.

Out here in Nevada we call that "Geothermal Energy"

Pump water into a 'hot spot' in the ground and up comes steam. Turns your turbine and the water gets cooled in a cooling tower to be sent down again...

http://www.cleanenergyclassrooms.ca/images/uploads/colour_diagram.jpg

http://www.businesspundit.com/wp-content/uploads/2008/08/geothermal.png

BUT while the ENERGY is FREE you still have to pay for it :P

In Paris France they have a huge incinerator... burn all the trash and heat water... makes steam for heat in Paris and generates electricity to run the plant and export the left over...

Metals are sorted by magnet and by hand and so is glass AFTER it leaves the furnace and the remaining ash is used for fertilizer

Saves land fill space, recycles AND produces FREE ENERGY...

To bad America is to STUPID to do this :tongue2:

[Average Joe]

It isn't free because there are still costs to pay to run the operation.

Free energy is actually impossible, in practical terms.

[Baggywrinkle]

It isn't free because there are still costs to pay to run the operation.

Free energy is actually impossible, in practical terms.

I will be quite content with cost effective energy that I can
create and control myself.

Examples include a stand of hardwood trees or a biogas powered steam
plant powered with manure from my farm animals --
assuming I've raised their feed it is the essence of sustainable permaculture.

[KathyT]

In late 2006 after meeting a man i will refer to as "The Doctor" i tried to mass e-mail the entire world, using my company, with the technology of how to create free dc energy.
The e-mail never made it, my company was seized and shut down, i was driven from my home and have been living off the grid since then.

I can’t help you on the direct current energy, but I am really interested in why “your company was seized and shut down”. By whom? For what reason? Was it because you ran out of investment money?

[MaskMarvl]

It isn't free because there are still costs to pay to run the operation.

Free energy is actually impossible, in practical terms.

I beg to differ... once a "free energy device" has been built it would pay for itself in a short period of time. After that, the energy produced would be FREE.

The ideal way would be to have each person or household own their own device to produce their own energy as needed. Yes, someone would have to manufacture these devices and consumers would have to buy them. But like I said, they'd pay for themselves.

In other words, the "device" would cost you some money but the energy itself would be free.

The only reason we don't have these now are thanks to the PTB (AKA, the owners/producers of OIL) that keep this technology from coming out at all costs.

[milk and honey]

No, the mechanics are different. Coils are meant to pull extra energy from the atmosphere around them and super charge a magnet by pumping electricity through it.
This setup is used to naturally harness the earths natual DC energy charge.
It works by the dimensions of the objects in use. So no they can not be wraped or charged in anyway as it will disrupt the natural flow of energy.
Remember that humans, the planet, the atmosphere and even space itself is positivly charged. We live in a positively charged universe.
This technology is the natural way to harness this energy to be used for our energy needs, transportation on and off world, healing, time travel, muti-dimensional travel, and so on.
In your research, have you ever read a book titled "A Dweller on Two Planets or the Dividing of the Way" by Phylos the Thibetan?" It was written in the 1880s. There are some references in the book about free energy and how the Atlanteans powered their anti-gravity craft, their lights, wireless tele-visions and myriad appliances by the use of what they termed the "night side forces". Some of the principles involved are described. The power device itself was contained in a box a few feet long.

The book was the first work to reveal the Lemurian Brotherhood of Mt Shasta and their lineage to the science/spirituality of Atlantis.

[Magii]

I'm still waiting ..

No one built this device yet?

No pics? no video ..

just words on a screen ..

i guess thats how everything is ..

~~~~
:mfr_omg:

[Julius]

I'm still waiting ..

No one built this device yet?

No pics? no video ..

just words on a screen ..

i guess thats how everything is ..

~~~~
:mfr_omg:



Sometimes things aren't given to you on a silver platter. You need to be a player instead of a spectator.


I wish I studied physics in high school to better understand this stuff. In the last few months I've been trying to read-up on this stuff, but I guess you can't teach an old dog new tricks :original:

If there was something I can help with, I'm in like a dirty shirt.

[Flying Pyramid]

There is no such thing as free energy.

Even if this theory was sound and worked, you'd have costs in setting it up and initiating it. From the mining and refining of the materials needed, to the professionals needed to plan how it works, to the building of the devices needed, to replicating it all over the world.

Like anything, you've got costs to meet, oh and wages to pay, therefore, you'd need to "sell" your free energy to be able to make the money to enable you to get it out there.

Wind energy is free. Wind costs nothing. But the turbines do!

NOTHING on this earth is free and nothing ever will be because we cannot live with out buying, selling, bartering and trading.

Yes there are costs involved. The statement is "Keep The Knowledge FREE". Do not let any company or one person or one country "own" this knowledge. I am not trying to patent or retain ownership of this knowledge. Remember, read my words and see between the lines. Remember there are rules we all must follow includeing me. Remember that i was not the one who "discovered" this knowledge i am just the one to take the heat for releaseing it. Hundreds of thousands of people know what i know and even more before me tried the same thing and were "removed" from the picture. Everything happens for a reason. Everything has a time to live and a time to die, yes?
If Bill & Kerry never built project Camelot/Avalon and the peope never gathered here then none of this would ever had happened.
Certain events must be set in motion to set others in motion. I am but a gear in the grand design. Once you realize this fact you can see the patteren of life.
I posted it and a good percentage already new what i was talking about.
A time for eveything under the sun.

free energy devices leverage off a corrected understanding, in particular where electrical engineers have made an oversight for the past 100 yrs, the theory is detailed here:

http://www.cheniere.org/books/efv/index.htm

If you are a nuts and bolts guy and want to make something, start here:

http://tech.groups.yahoo.com/group/Bedini_Monopole3/

and read this:

http://www.cheniere.org/sales/buy-feg.htm

Then WHEN you understand the concepts WELL, and have played enough with the basic vers, make this (no moving parts and far higher COP):

http://www.cheniere.org/references/MEG_Patent.pdf

I believe the above relates directly to the phenomena Flying Pyramid is referring to.

For alt info on how free energy can be retrieved in a different form, look here:

http://www.theorionproject.org/en/hydroxy.html

search youtube for more info on this. lots of folks working on it. few have got the driving correct to achieve required COP

other IMPORTANT things you should know include:

http://uk.youtube.com/watch?v=NuThDmYRMU8

for an understanding of the super structure and geometry at play see this (demystify pyramids etc):

http://video.google.com/videoplay?docid=6151699791256390335&ei=2xoiSauuLKf22QKDuM39Bg

this link relates DIRECTLY to the underlying MECHANISM of the gadget that Flying Pyramid describes in his posts:

http://www.cheniere.org/books/HoJo/index.html

and

http://www.energyfromthevacuum.com/Disc4HoJo/index.html

most of the sources listed above can be found on youtube and other ;) internet sources

Thank you.

Flying Pyramid,

I appreciated that you share this information with us, hope that this device really work and you will greatly deserve all the credit. All the magnet parts you mentioned need to be custom made and may be expensive to build without good idea of how it works. Since you have built one before, could you suggest the magnetic material you use, how much magnetization field did you applied to the ball. If you have some drawings, photos with some dimensions, it would be a great help.

In my opinion, the first thing we need to prove is whether the pyramid magnet has only one pole. This will be a great discovery by itself if this is true. Second, according to your first and second posts, some information is not consistent (or I might not understand them correctly). In the first post, you mentioned that the balls are notched in four areas whereas in the second post, you mentioned that the ball is hollow with a tetrahedron inside. Can you verify this information? How can I tell the shape of the spinning tetrahedron in the hollow ball without seeing it?

Please continue to share information with us as we will need more guidance from you. Finally, I suggested that you also posted your invention in www.overunity.com It is a big community full of hardcore inventors that will also give this idea a try.

To my knowledge other mineral compounds have been used but raw compressed magnetite is the most powerful.
It's natural and a universal knowledge/building block.
Yes i hope people start proveing these "theories" so people all over the world will have tangible proof and they will start applying it to other things and at that time i will release the next technology "breakthrough".
The posts are refering to 2 seperate systems, one useing three notched balls and a pyramid create dc energy, the balls with stars inside are the drive engine for starships.
Yes, i will be posting schematics diagrams and a video presentation.

I can’t help you on the direct current energy, but I am really interested in why “your company was seized and shut down”. By whom? For what reason? Was it because you ran out of investment money?

It was the powers that be that shut me down and follow me everywhere and make life harder than usual.
Watch Duncan O'finion's video and he explains it very well.
The more powerful you or your knowledge is the more they will f**k you.

I beg to differ... once a "free energy device" has been built it would pay for itself in a short period of time. After that, the energy produced would be FREE.

The ideal way would be to have each person or household own their own device to produce their own energy as needed. Yes, someone would have to manufacture these devices and consumers would have to buy them. But like I said, they'd pay for themselves.

In other words, the "device" would cost you some money but the energy itself would be free.

The only reason we don't have these now are thanks to the PTB (AKA, the owners/producers of OIL) that keep this technology from coming out at all costs.


Exactly.

[ABHA]

Zorgon quote:
'To bad America is to STUPID to do this :tongue2:[/QUOTE]'

???

No, its too bad America is controlled by the Oil tycoons/corporate media /bankers etc etc etc.
The control is out of the people's hands, some of them are stupid ill agree, but your idea is old news, and the fact that it is obviously a great idea, proves how controlled and doomed we really are under basta** world government regime!
I mean look at all the shelved patents and missing inventors, It drives me crazy!!!!!!!!!!! AAARRRGGHH!!!!!
It truly does to distraction. :mad3:


I personally know the HHO electrolysis works!! as a friend and i built a cell easily first try with cable ties as spacers and rubber bands to mock up, 1 and a half liters a minute first try, the options ARE already here, its the freedom of use that is not im afraid.
:wall:
have a great day all the same, i don't wear it, but it does get to me.:original:

[SpeedAdict]

As i said before, i'm working on this for some time. But is not THAT simple.

The post have some inconsistence, and the answer, (thanks for sharing) did not answer specific questions that are basic, like how to Measure de Voltage, How to monitor the setup if you LOAD with a devide that draw energy (voltage and amperage)
A lot of the instrument of Hihg Precision measurements, dont apply to this toy, the spinnig speed is too low, the spark not always jump and thus create drops in the voltage, etc...

This is like he explain a "MODEL T" of a real producing "Free Energy" devive...
Its trying to build a "Formula 1" with a blueprint of a "horse wagon"

Zorgon, my friend, i understand that geothermal energy is used many many years ago in Iceland, and run a very bast amount of energy in such a way that the energy is almost free, they pay the bills only in winter when electrical power spike rise from the extra heating needed..

BTW, The plant over USA, (I'm not there) that was abandoned, located in the Yellowstone Geothermal Area is now running quite well..
I read that they are producing some goods megawatts... But is NOT connected to the national electric grid in usa.. ( Imagine WHY??? jejejeje )

A "model-like" was sent to the "CIDIG" from my University UNEXPO in the year 2006 and by some remodelation in the infraestructure, the "model" dissapear with blue-prints and years of data. :tears:

what left in my uni. was some experimental models, various strontium, neodymium and other rare magnets in differenta shapes.. A bunch of raw magnetite but bassicly they left us empty handed.. To play with magnets in the labs :wall:

[m00g]

Thank you for posting this information FP :smoke:

I'm working on a Lord Kelvin Electrostatic gen at the moment, not for power but to test the water on my vegies. Once that is done I really look forward to trying out your kindly posted info.

One question, is magnetite machineable in a mill or lathe?

All the best ;)

[stargate22]

Nothing in life is free, ya just have work at it ...or just buy the plans on EBAY
fer about $9.95. Oh yea, and know a NASA-type machinist.

Have at it all ya Free-Bees.

http://www.youtube.com/watch?v=PFGiWiXMHn0

They are in production in Europe, but ya can't buy one...ya can only lease it.

Hint: Magnets must be aligned in "attracting poles" at secret sacred geometric angles ( of the GODS ) to work.

Ya gotta have Ump! to generate juice !


:lmao:

[Mr X]

This is all funny to me....the device, wait, I mean several devices already exist. yes, it's the oil tycoons and others with HUGH-f'ing-MUNGOUS wallets that are helping the governments, yes that's plural, that have them. Tesla is rolling in his grave.

[bennycog]

It isn't free because there are still costs to pay to run the operation.

Free energy is actually impossible, in practical terms.

we were meant to use earths resources to create the means to develope these new energy devices... and you don't need to be a spiritualist to know this.. we may run out of oil (who knows!) but if we do, the earth can replenish it and we can use it all again... the oil and other energy resources are only a stepping stone to a less environmental impact and more efficient source. And even then i would imagine that what we use will have a big impact on something else and we would have to move on. or else we get takin back right to the start...then we would have to learn all over again... this concept is not only related to energy, i think it is related to all of us.

[blastawaycas]

i am a mechanical engineer sounds good to me and dont forget all you engineer types such as myself, i see one or two doubters here ........ The two stroke engine in theory does not work!!!!!!!!!!!, but as those with an engineering background knows, produces more bhp per litre than an equivelant 4 stroke but its drawback is lack of torque

[m00g]

Unfortunately due to the subscription I worry that Flying Pyramid can't get info out.

This info for someone that can tinker and also know people that may be be able to work on the geometry in manners of machining for accurate dimensions is really paramount.

FP where do you plan to seed this info so we can help "each other" work on it ?

All the best :original:

[Flying Pyramid]

Everywhere i can.
Youtube, a book, my art, music, every single website that will let me post it, and i will be setting up my new webserver for a FREE contact place for who ever wishes to come.

also my e-mail is: revolutions_inc@hotmail.com

Pray that Bill & Kerry decide to go another route to obtain the money they need.

Peace, Love & Light

[GregorArturo]

Hey all, I finally made my way over to this thread and wanted to share. First off, I almost absolutely positive that a monopole can inherently not exist. But who knows.

However, I understand how the design works, and I have to say it does work!. Anyways, the top of your pyramid let's say is the north polarity and it rests on the three balls pointing up with north polarity. The way the fields are constructed the pyramid will not slip off. However, it will try to continually align itself with the balls, but do to the four edges over the three magnetic fields produced by the spheres it is not possible.

The geometry of the pyramid also induces a natural vortex, aka torsion fields which causes it to rotate, in relation to the equator as Flying Pyramid said. The magnetic and torsion forces (along with gravity) work together and create a spin. That's as simple as I can put it. I will tell you when I read it, I was like damnit, he's dead on. It's very simple and I am very confident in it that it works.

Here is the easiest way that I plan on testing it. Magnetite is Fe304 and is naturally magnetized. Iron can be more magnetized than magnetite/lodestone as it is pure while oxygen is paramagnetic. However, one must also consider the crystalline stucture of magnetite as it is octehedral, which reiterates the geometry on a micro level, increasing the torsion fields of the geometry, and I would have to assume also the magnetic field.

I have a ton of iron as my disposal and have been planning on melting it down for some stuff anyway. What you can do is make casts out of ceramics. For the ball mold, make half of a sphere, basically a bowl, as Flying Pyramid said cause you can stick them back together.

The iron has to be heated to roughly 2800 def F, way past it's curie point, so after you pour it into the mold, you set the mold inside a steel/iron cylinder that you wrap coils of wire around which you then hook to a DC source. I do not know off the top of my head, but line it up so the pyramid apex is north and charge one of the ball halves the same direction. Then you would flip the currect direction, and charge the other ball half. Once the iron cools below the curie point which is like 800 deg F or something, it is permentantly magnetized. I am not positive on how much current you need but you shouldn't need much when the metal is molten to make it magnetize. A car battery would probably work great, but you want to make sure it's not too much current and burn out the battery (that's why resistors are usually for).

And ta-dah, you got your magnets. To heat the iron, you need some kind of fireplace, preferebly enclosed and using coal/charcoal preferebly. You can use wood it's just harder. There are also other accelerants you can use. Using a fan is the easiest way to make a billows to blow air into the fire. It will take awhile to heat up to 2800 deg.

Good luck to you all.

Question on the star drive: You said take two pyramids and put them together, and it makes a tetrahedra. Do you mean octehedron? That would make much more sense. Tetrahedra are making me think of the two interlocking ones usually associated with the internal structure of planets.

EDIT NOTE: And you said the pyramid is at an angle of 22.5 deg? You didn't relate this to the pyramids at giza did you? As it's side angle is 52.817 deg and its corner/edge angle is just under 42 degrees I believe. Otherwise, it would be a very short/shallow pyramid.

Can you also clarify on the 19.5 degrees in terms of notches? Do you mean like cutting off the tip of one of them at 19.5 deg, which also means it stands up easily?

[Marius]

I, too, have few doubts that this will work - it's logical. However, have we made the step on how to 'harvest' or transform the energy created in order to use it?
Maybe I'm being a bit thick tonight but I don't quite get that bit...

[GregorArturo]

I, too, have few doubts that this will work - it's logical. However, have we made the step on how to 'harvest' or transform the energy created in order to use it?
Maybe I'm being a bit thick tonight but I don't quite get that bit...

Flying Pyramid, he says it generates a charge, I believe on the pyramid, but I don't remember, and do not understand that part science wise. You can go back and look. However, regardless, you'd always be able to hook up the rotating pyramid to an electrical generator.

[J_rod7]

*
***
*******

GregorArturo,
["First off, I almost absolutely positive that a monopole can inherently not exist."] Well, so far there are some good 'Theories' around which support the Idea of Monopoles existence. And I read somewhere once that they have been found in some Physics research (can't remember where I saw this). Follow this Link:
http://books.google.com/books?id=l6Z8W33JWGQC&pg=PA249&dq=monopole (http://=l6Z8W33JWGQC&pg=PA249&dq=monopole)

Marius,
["...have we made the step on how to 'harvest' or transform the energy created in order to use it?"] THIS IS the question which NEEDS to be answered. Such a Device absolutely MUST be able to provide USEFUL Power Output. :trumpet:

In Peace

Rod

:gathering::gathering:

*******
***
*

[stargate22]

The secret is not to Break the "Dipole" :lmao: "Free energy" needs to be free too.

...it has to be allowed to flow freeeeely.

[Flying Pyramid]

I'm sure there is still days of time before the subscription goes into effect so i will be posting the diagrams, specs, and visualization art in about 24 hours.

Sorry i can't reply to each question individually but in the current situation this is better/faster.

[GregorArturo]

["First off, I almost absolutely positive that a monopole can inherently not exist."] Well, so far there are some good 'Theories' around which support the Idea of Monopoles existence. And I read somewhere once that they have been found in some Physics research (can't remember where I saw this). Follow this Link:
http://books.google.com/books?id=l6Z8W33JWGQC&pg=PA249&dq=monopole (http://=l6Z8W33JWGQC&pg=PA249&dq=monopole)

Marius,
["...have we made the step on how to 'harvest' or transform the energy created in order to use it?"] THIS IS the question which NEEDS to be answered. Such a Device absolutely MUST be able to provide USEFUL Power Output. :trumpet:
In Peace
Rod


I'll look into it. But think about base level physics here. What is magnetism? It is an alignment of the spin of the atoms inside a substance, and this alignment creates a magnetic field. The axis of the atom creates the polarities at either end of the axis. So, how exactly do you go about cutting off the other side of the axis? That is my question.

Also, if you question it metaphysically in terms of duality and balance, that alone will produce a solid answer.

[stargate22]

Hint: Ferrite shields...:lmao:


Disregardabove posts....It's easier to go for the "Tom Beardon" / "John Bedini " radiant stuff!


I've tried it...IT WORKS!!!!!!!

[elias]

Hi Dear Flying Pyramid,

I would suggest you starting a thread on http://www.energeticforum.com/renewable-energy

There are very talented people over there working with Peter Lindemann. I can start a thread there about your idea, but I thought it might be better that you could join and post your interesting device over there. There are so many interested experimenters over there and surely we can get a replication of your device. I am eager to build your device, but have not yet grasped the full picture. Some diagrams and pictures would totally help us.

Thank you for sharing this info, your info makes sense. It also somehow correlates with the decoded info of Richard Hoagland from the Mars monuments.

Elias

[ABHA]

I'll look into it. But think about base level physics here. What is magnetism? It is an alignment of the spin of the atoms inside a substance, and this alignment creates a magnetic field. The axis of the atom creates the polarities at either end of the axis. So, how exactly do you go about cutting off the other side of the axis? That is my question.

Also, if you question it metaphysically in terms of duality and balance, that alone will produce a solid answer.

Ask or watch Hutchison because Tom Bearden says that is exactly what he is doing with his transmuted metals, creating single monopoles that burst his solid bars into fragments, there are stacks of books on it, The little known pier luigi ighani used to have a monopole machine, main stream physics is deceiving or better put incomplete, purposly or not, the control since the early 1900s is as strong as it ever was. Remember Whittiker electricity was changed and not for the better, READ Tom Bearden.:winksmiley02:
have a great day.

[pedro m.b.]

interesting, send more about it detailed.::thumb_yello:

[DJModer]

Hint: Ferrite shields...:lmao:

That's the only way I can think of now to create a (pseudo) monopole magnet. With a triangle shape and shielding on four side, there will be very little surface area for flux to flow from the top of the pyramid.

Tom Bearden mentioned that by introducing asymmetry in magnetic field, one can harvest energy from it.

http://freeenergynews.com/Directory/Inventors/Bearden/SymmetricalPermanentMagnetMotor/index.html

[nestingwave]

Flying Pyramid,

Where do you get 25.5 degrees for the slop of the sides of the Great Pyramid?

No, no --- way too steep -- as I suspect you know quite well.

"The base length of the Great Pyramid is calculated as 230.33 meters or 756 feet, according to professor Lehner, and its height once rose to 146.59 meters or 481 feet (Ibid., page 108). The angle of inclination or slope of its faces are 51° 50' 40", again according to that same author."

I do understand where you get the 19.5 degrees for the sphere. I have studied Richard Hoagland's work. The very Universe tells us of these proper energy inducing angles!

However, the 22.5 degrees is way too steep, eh? Was that intentional perhaps? One of those "figure it out for yourself" sort of things?

Or, were you thinking of the 22 Major Arcana archetypes of the Tarot of Hermes Trismagestus? heheheh.

I understand that some disinfo is to get the reader to think for himself. In fact, that's the very technique that the ETIs use to provoke us into holonomic thinking.

A good teacher wants his students to think for themselves by following everything through for themselves. If they can correct purposeful mistakes, it shows they are not taking anything for granted but really getting a handle on HOW things actually work.

I am sure you have something very important, however.

Magnets and the biogeosystemical forces of the planet are certainly very significant indeed.

David Hammel used cones and a constant "falling" to produce rotation of the matgnetic fields as well as confinement to build up the energies. In fact, he had great trouble CONTAINING the energetic buildup! He produced some very powerful energetics in that way according to the witnesses that saw it.

Indeed DC current is what Mother Nature uses. Of course, that can be easily rectified into AC to run the applicances we already have. DC works just fine for hydrolysis to produce hydrogen or "Brown's" gas and also works to induce "Cold Fusion" when used at a much higher voltage.

I do think that 2012 is not a single event but the center of eventS.

We are already experiencing that transformative process right now.

So ... the world may not wake up entirely until around 2012 but ... in the meantime, lets do this in our garages!

Experimenting with the very simple units that produce Brown's gas through low voltage hydrolysis can turn any present car into a highly efficient hybrid!

The powers that be really don't WANT us to know how simple it actually IS. They want us to think in terms of billions and billions and years and years of R&D. In other words, a subtrafuge in favor of more and more fossil fuels!

And thus ... the continuation of slavery and control.

Meanwhile, folks are DOING IT ON THEIR OWN with little or NO financing.

There are at least five magnetic motors that have been invented and some were right on the edge of production several years ago. However, the powers that be must have put down the jack boot. There is no doubt that they work. The successful replications of the Hammel spinner prove the principle as does John Bedini and Tom Bearden and, of course, Stan Meyer and many others who suddenly and unexpectedly became ... deceased.

So ... lets do it quietly in our own garages, eh?

There is a tremendous intranet of people experimenting. A few are actually successful. Most are not simply because they find it so impossible not to change the experiments of those who ARE successful such as John Bedini and Tom Bearden and David Hammel.

That's why a 12 year old school girl was able to be successful in John's simple motor design while all the guys who think they know so much continually go off on rabbit trails playing the old supposition game of "conclusion pole vaulting." heheheh.

John even informed KeeyNet of how to make the Hammel Spinner work. We do have to listen to those who have actually been successful and resist the temptation to do things according to our own suppositions while repeating the failed experiments of others. This happens because we can be so in love with our own imagined "knowledge" and "expertise."

I do look forward to some plans and diagrams. Soon, I hope, because I will not pay to post here. Entirely TOO much else going on that is actually practical.

[berathebrain]

I think that the 22.5 degrees has to do something with Earth's axis tilt. Now it is somewhere between 22.1 and 23.4 degrees.

[Flying Pyramid]

You are both right.
I am withholding certain info.
And yes 22.5 refers to the actual earths axis.
Magnetic north and true north play a key role in decifering this code.
Also ask yourself why the pyramids have been allowed to remain through 2 worlds. And why they are angled at true north and true south.
Time along with others play a vital role in this technology.
The reson others have not based thier work on this design is because they do not think "outside" the box. They are going by what is "fact" and "known physics" that are based on a 3 dimensional reality.

Ever tripped on how free will works?
They are one in the same.

[stargate22]

Try 30 deg. and see if something magical happens :thumb_yello:


...or 23 deg.

[Marius]

Take some of the details away to fully comprehend this idea and accepting that it will work - how would I cook my pumpkin soup using energy from this device? How do I run my laptop?

Gregor, you said you can 'hook up' an electrical generator - please, how?

I'm on a similar line as J-rod in that the concept for how to make this energy usable was not described yet. It may well be that this is self-evident to some of the technical guys of you and those with a science/engineering background but I'm not overly technical so I rely on logical thinking + common sense ;)

Maybe if plans & more details come through from Flying Pyramid, then things will become clearer.

Last line to say, I really appreciate this is being posted and opened for discussion.

[Magii]

Sometimes things aren't given to you on a silver platter. You need to be a player instead of a spectator.


I wish I studied physics in high school to better understand this stuff. In the last few months I've been trying to read-up on this stuff, but I guess you can't teach an old dog new tricks :original:

If there was something I can help with, I'm in like a dirty shirt.



Hey I hold the secret of the secret to the other secret ...

Seriously whats the point of making a post .. of FREE DC ENERGY

and then """WITHHOLD INTEL"""

----
FutherMORE this thread has been HYJACKED by XYZ people saying ABC things that have NOTHING TO DO with what the Orig post said / or is trying to output....

~~~
Ill ask again - lets see diagram, images, a device, a blueprint... something...

heck .. draw it on a piece of paper by hand ...

:mfr_omg:

[asteram]

How one would get energy from this setup, assuming it works:

The pyramid is rotating. The pyramid has a magnetic field, therefore the rotating pyramid creates a rotating magnetic field.

Surround the rotating magnetic field with a coil of conductive wire, e.g. copper wire. The rotating magnetic field will generate an electrical current in the copper wire, i.e. a generator. This is how all electric motors and generators work.

the end.

And it's saddening that I have to explain something so ubiquitous and commonplace as this. Do you people not have even the basics of knowledge of how your world works? For shame.

[khepran]

Hey Flying Pyramid, like this? (shown in slow motion)
regards, -k

[Johannes]

The geometric arrangement of dimples in the spheres suggest that tetrahedrons instead of spheres should work as well.

The 22.5 degrees, or thereabouts I take as a tilt in alignment with earths tilt wherever this device would happen to operate.

Cheers

Johannes

[nestingwave]

You are both right.
I am withholding certain info.

In this matter of accessing unlimited free energy for a New Paradigm civilization, we must learn by doing. That is because it is the very process of discovering this for ourselves that is our "initiation" and brings the transformation necessary to WISELY HANDLE infinite energy and intelligence.


And yes 22.5 refers to the actual earths axis.

Is it not true that most folks experimenting with pyramids line them up to magnetic North instead of true North and South? Perhaps this is one of those bits of "conclusion pole vaulting" so typical of our present scientific paradigm?


Magnetic north and true north play a key role in decifering this code.


Probably very important, eh? No doubt this is a matter of decipherment all the way. Discernment and intuition also. All those items most likely require an UNLEARNING of our current "science" and its many many false suppositions.

It presently is prejudiced to serve the competetive status quo, you know.


Also ask yourself why the pyramids have been allowed to remain through 2 worlds. And why they are angled at true north and true south.


Just a guess, but perhaps TRUE and MAGNETIC will allign during the world soon to come? Also, perhaps they are telling us how to line up our own experiments in order to make this discovery?



Time along with others play a vital role in this technology.


Tom Bearden and many other quantum physicists refer to the energetic fluctuations of the vaccum as existing in the "time domain." Presently UNMEASURABLE directly.

Perhaps every decision, and the intention behind it, slightly or greatly effects the "time-line" upon which we travel. I think we already constantly "alter" time lines, only we are mostly unaware of it.

There are most probably an infinite number.



The reason others have not based thier work on this design is because they do not think "outside" the box. They are going by what is "fact" and "known physics" that are based on a 3 dimensional reality.



I agree, and herein is the reason why we don't already have access to infinite energy and intelligence. In my own experiences with ETI I have come to believe that they are provoking us into HOLONOMIC thinking -- a complete departure from the taditional LINEAR thinking of the past several millenia. We already do occasionally think holonomically -- such as a zen koan, intuitive inventions, great poetry, creative jazz expression etc. That is when we express something "out of the box" of our traditional customary and highly restricted LINEAR thought which does not take into account the fact of our total interconnectivity with all that is.

I find the whole UFO/ETI experience to be incrementally leading us toward a kind of breakthrough of the recognition of what already IS - but not presently seen - because of our societal self impositions based upon vain past traditions.



Ever tripped on how free will works?
They are one in the same.


In my present and highly limited view of PURPOSEFUL INTENTION: --> The quality of the purpose (i.e. how it alligns with Creation's evolutionary intention) is directly proportional to the quantity of the intention in its creative power.

AND -- (a P.S. to everyone)

I sense that many here among us are like baby birds awaiting a free meal without expending any work I suggest that those who really see the vision of free energy and a New Paradigm on this sick and dying world put forth a little effort to DISCOVER by doing their OWN experiments and simply use all the knowledge that is ALREADY avaiable to GUIDE you, not TELL you what to do.

In the slavery of this planet, we have been programmed to let OTHERS (who refer to themselves as "experts") tell us what to do. That is EXACTLY why this planet remains enslaved at this moment.

Everyone should relalize that the people throughout history that have actually stumbled upon this free energy almost by "accident" in MOST cases have no idea HOW or WHY it works -- only that it DOES. Don't wait for someone to give you exact plans for anything. There is already enough information out there to be gleaned and applied creatively. Discovering free energy does require something of YOU. That is, thinking OUTSIDE the box and PRACTICALLY applying it creatively.

It is this very process that can humble you and bring your consciousness into the wisdom necessary to properly HANDLE the unlimited energy from the quantum vacuum without greedily destroying yourself in the process.

[Flying Pyramid]

Thank you for this, very well posted and delivered.
I've always wanted to teach man how to fish.

Flying Pyramid

[Flying Pyramid]

Hey Flying Pyramid, like this? (shown in slow motion)
regards, -k

Very nice concept.
However the spheres, think about the number 6.
You start the sphere creation but curve in so you create a notch that is 19.5 degrees thick on one side, then apply that 19.5 degree notch to all four sides.
Press the pyramid so that mid-way of the pyramid is barely not touching the nocthes as they pass. Then speed up the pyramid rotation to a ridiculously high revolution and at the same time, time it with the rotation of the three spheres so the four notches on each sphere pass a corner of the pyramid as it spins. All pieces are rotating in sycronisity at very high revolutions. Energy will buid at the bottom of the pyramid. A crop circle in one of the pics i posted in the first post of this thread has an image of it, but the people that found it and researched it have it upside down......

[recallone]

Eagerly anticipating the actual plans...I'm not a scientist, not an engineer, no fancy degrees to speak of, but I have manufactured and put to use quite a few electrolyzers and can tell you that they do work.

I understand the basics of magnetic energy, but not enough to just start carving some magnets up and arranging them with a desired result in mind. But with plans...:thumb_yello:Now we're talking.

For those that want to split hairs about the term Free Energy, really - grow up. You're trying so hard to argue that you're overlooking what the term implies. That you don't have to buy one thing (like gas) in order to perform another task (power a car). Of course it costs money to make these things, but the point is to do away with the master-slave relationship between us and those that seek to control us. If you're all good paying for electricity every month instead of owning a device that will provide it for you, then have at it! Personally, I want some of that suppressed technology in my hands so I can put my money/time/energy towards things that I want to put it towards, like music, my kids, my wife, my friends.

If I didn't have bills to pay and food was free, water was a given and electricity was just something we knew how to pull out of the air...I'd be free to do what I wanted to do. Not what I have to do. And that includes helping others get to that point of a shackle-less existence where we're free to do what we want - create music, create art, learn, love, teach, BE. We're so distracted with all of our obligations that we can't afford the time to just BE who and what we want to be.

What do you enjoy doing that you can't because you're too busy keeping up?

Think about that for a second and consider whether or not arguing about the semantics of free energy is really worth it. These ideas need all of our collective energy behind them to really flourish, and its not going to get there any quicker with lawyer-type debates arguing definitions.
Sorry if that sounded rant-ish, but I'm really getting tired of the needless arguing.

Peace.

[Paramartasaya]

:original:Hi here is a good source of information for making a free energy electric motor, the secret is hi voltage and very low amp.


http://jnaudin.free.fr/html/qedynmnu.htm

Here you can download some good information about free energy motors:

http://www.4shared.com/file/72901685/ef2daedd/Ebook_-_Free_Energy_motors.html

http://www.4shared.com/file/72903568/a750893c/eBook_of_free_energy.html

http://www.4shared.com/file/72902183/11b4b283/Free_Energy_Power_Supply.html

http://www.4shared.com/file/72902414/58d95e82/Pat6630806.html

[Paramartasaya]

In project camelot there are another threads about free energy:

http://www.projectavalon.net/forum/showthread.php?t=2530

http://www.projectavalon.net/forum/showthread.php?t=1399

http://www.projectavalon.net/forum/showthread.php?t=5052

http://www.projectavalon.net/forum/showthread.php?t=5519

[Paramartasaya]

Flying Pyramid, thanks for the information I hope you give us more about your work.

[Zelong]

Certain events must be set in motion to set others in motion. I am but a gear in the grand design. Once you realize this fact you can see the patteren of life.
I posted it and a good percentage already new what i was talking about.
A time for eveything under the sun.

Thank you.



G'day Flying Pyramid thanks for the Think Tank :welcomeani:
.......... -every action has a reaction-

Magnets and Gyroscopes I feel are in our face,it's here to work out,Gyroscopes and Magnets?
I know these two energy's are needed and off course one more(makes three).
Gyroscope:
"A device consisting of a spinning mass, typically a disk or wheel, mounted on a base so that its axis can turn freely in one or more directions and thereby maintain its orientation regardless of any movement of the base."

http://i37.tinypic.com/1e5a2u.png
Source: http://en.wikipedia.org/wiki/Gyroscope

If anyone here has had one of these in their hand they will know what I mean here. :zip:

"Energy has many forms and can be converted from one to another. It exists as a potential; as heat, light, sound, electrical and magnetic as well as kinetic energy".

Please all check this page out: http://www.gyroscopes.org/

Please carry on. :thumb_yello:

Zelong.

[Squeptikal]

Very nice concept.
However the spheres, think about the number 6.
You start the sphere creation but curve in so you create a notch that is 19.5 degrees thick on one side, then apply that 19.5 degree notch to all four sides.
Press the pyramid so that mid-way of the pyramid is barely not touching the nocthes as they pass. Then speed up the pyramid rotation to a ridiculously high revolution and at the same time, time it with the rotation of the three spheres so the four notches on each sphere pass a corner of the pyramid as it spins. All pieces are rotating in sycronisity at very high revolutions. Energy will buid at the bottom of the pyramid. A crop circle in one of the pics i posted in the first post of this thread has an image of it, but the people that found it and researched it have it upside down......

Ahh, HA! Certainly a nice piece of the puzzle! Rotate the notched spheres in sync with the tips of the pyramid so that the spheres are actually rotating at 3x the speed of the tetrahedron, or at 4x the speed of the pentahedron (traditional Giza pyramid).

I have seen some data about the relative non-linearity of push vs. pull type motors, and of simple magnetic devices. Most of the latter develop almost no torque, certainly not enough to drive a generator.

You say the magnetic material HAS to be Magnetite, or can Neo be used?

[Flying Pyramid]

You say the magnetic material HAS to be Magnetite, or can Neo be used?

Yes, other material compounds have and are being used by other races but most of the races that first discover this technology use raw magnetite.
It's because it has not bee manufactured to be naturally magnitized. It has something do do with they way humans, the earth and magetite all harmonize together because we are from the same planet, magnitite is part of our bodies makeup at some molecular level just like the rest of the natural minerals that show up in us.

Look at the picture of magnitite in the first post.
It naturally forms into pyramid style chunks.

[Paramartasaya]

Free energy device working with no battery, very interesting:

http://www.youtube.com/watch?v=7_4m4WCKbew

[khepran]

Hello again, Mr. Pyramid. So, like this? (attached & in slow motion)
regards, -k

[Squeptikal]

Free energy device working with no battery, very interesting:

http://www.youtube.com/watch?v=7_4m4WCKbew

This is a real work of art! I've seen it before but have no understanding on how the electrostatic forces are used.

[Flying Pyramid]

Hello again, Mr. Pyramid. So, like this? (attached & in slow motion)
regards, -k

Something like that.
Make the spheres like the number 6.
Look at a swastika and imagine it being rounded and the 4 arms make 4 notches. If you were to look at the sphere from the side, the notch would appear like a cresant moon, thin at the top and bottom but thick, 19.5 degrees thick, in the middle.

[freespirit]

Just thought i would share this courtesy of nikola tesla and wiki
http://en.wikipedia.org/wiki/List_of_Tesla_patents
http://www.pat2pdf.org/patents/pat0382279.pdf

According to what i have read on wiki magnets degrade over time
Q.. How long ?

Flying pyramid any thoughts

freespirit

[Flying Pyramid]

This is where molecular bonded metals come into play.
Raw magnitite will never degrade as long as it is not formulated with any other componds.

Magnitite is the first step.
Develope the system on this material first and when the world understands how and why it works, then we can begin the next step.

This basic idea leads to much greater and dangerous things so we must fully understand this concept brfore building on it.
Walk before you run.

[DJModer]

Something like that.
Make the spheres like the number 6.
Look at a swastika and imagine it being rounded and the 4 arms make 4 notches. If you were to look at the sphere from the side, the notch would appear like a cresant moon, thin at the top and bottom but thick, 19.5 degrees thick, in the middle.


How can the ball magnets keep spinning while maintaining the same position relative to the pyramid? If the balls are not floating, they will generate a lot of heat due to friction. I still have a hard time visualizing its operation. To avoid any confusion about your idea, can you show us some drawings?

[Flying Pyramid]

How can the ball magnets keep spinning while maintaining the same position relative to the pyramid? If the balls are not floating, they will generate a lot of heat due to friction. I still have a hard time visualizing its operation. To avoid any confusion about your idea, can you show us some drawings?

1.) They are centered in the same spot spinning in revolutions ajacent to the pyramid, there center never moves from it's location much like the image posted by khepran.

2.) There is no friction because the balls and the pyramid never touch at all in anyway. They are close enought to slide a sheet of paper through but they do not actually touch. Therefor no friction, no decay.
The entire setup is suspended in some fashion and not grounded.

3.) Yes, i will have all the materials posted soon as possable.
Even if the forum goes subscription, there are people here how have expressed their ability to repost my posts here so you all can keep up with what's going on. Even though i do not agree with this as it interferes with fellowship and being able to ask/answer questions but it is nessasary.

4.) If you were to look at the pyramid straight on from the side,
Half of the pyramid would sit above the balls and the other half would rest below the balls.

[stargate22]

Magnitite....Hmmmmm, it has been reported that Extra-Terrestrials shy away from the stuff like an Evil Talisman. It could very well be the / a piece of the puzzle.

Another problem found with "These" free-energy devices is the fact the
magnetism is usually lost ( de-gauss ), or substantially looses most of it....oh yea they work, but for for long.

So far it's usually back to the drawing board to find that magical combination of materials, angle, and shielding to isolate the fields.

Shielding, such as "ferrite" in the correct thickness / tolerances, sort of act as an On / Off switch for magnetizm in a rotary fashioned device.

That would be a way of imitating an electrical field in the conventional electric motor... :shocked:

[DJModer]

2.) There is no friction because the balls and the pyramid never touch at all in anyway. They are close enought to slide a sheet of paper through but they do not actually touch. Therefor no friction, no decay.
The entire setup is suspended in some fashion and not grounded.



Thank you for your explanation.

I can visualize that the pyramid and the balls do not touch, however three balls have to sit on a flat surface and stay in a fixed position, some how. I think, the spinning axis needs to be perpendicular to the surface. If the balls center of gravity are not balanced (due to some error in notch locations and volume or due to the pyramid spinning axis misalign), they may spin out of the positions.

Even if the spinning balls do not touch the pyramid, they will create friction with the floor and produce heat causes wear and tear (if spinning at high rpm), unless everything levitate.... May be, this is not a big deal.

The only to verify this is to build it. I appreciate that you share the information with us. I really like to see this idea become a reality.

[ayadew]

If I didn't have bills to pay and food was free, water was a given and electricity was just something we knew how to pull out of the air...I'd be free to do what I wanted to do. Not what I have to do. And that includes helping others get to that point of a shackle-less existence where we're free to do what we want - create music, create art, learn, love, teach, BE. We're so distracted with all of our obligations that we can't afford the time to just BE who and what we want to be.


You are right, I never thought about the world in that way. Thank you recallone.

On-topic: Also, thank you for this thread, it's a very interesting concept, but the main problem with creating a true free energy device is the extreme precision in construction needed. Is this correct?

[khepran]

...

regards,
-k

p.s.

are the spins of the magnet spheres perpendicular
to the ground plane, or to the angles of the pyramid
as shown in the animation?

[khepran]

...in slo mo again

regards,
-k

p.s.

are the spins of the magnet spheres perpendicular
to the ground plane, or to the angles of the pyramid
as shown in the animation?

[Flying Pyramid]

Thank you for your explanation.

I can visualize that the pyramid and the balls do not touch, however three balls have to sit on a flat surface and stay in a fixed position, some how. I think, the spinning axis needs to be perpendicular to the surface. If the balls center of gravity are not balanced (due to some error in notch locations and volume or due to the pyramid spinning axis misalign), they may spin out of the positions.

Even if the spinning balls do not touch the pyramid, they will create friction with the floor and produce heat causes wear and tear (if spinning at high rpm), unless everything levitate.... May be, this is not a big deal.

The only to verify this is to build it. I appreciate that you share the information with us. I really like to see this idea become a reality.

Yes the entire setup is suspended but not levitated in mid air.
They would be suspended in a fashion that created little or no interference.
The pyramid will levitate over the 3 spheres but it must be pressed down so that they are all in the right configuration.


You are right, I never thought about the world in that way. Thank you recallone.

On-topic: Also, thank you for this thread, it's a very interesting concept, but the main problem with creating a true free energy device is the extreme precision in construction needed. Is this correct?

Yes but there is alot of fun in trying different approches, styles, objects.
Even try other shapes and see what happens. We are entering uncharted territory, there are no "rules" to go by. This is outside of our structured physics. Have fun. ;)

...in slo mo again

regards,
-k

p.s.

are the spins of the magnet spheres perpendicular
to the ground plane, or to the angles of the pyramid
as shown in the animation?


That is a good question, you'll have to try both and see what happens.
I can tell you however, that depending on where you are on the earth it will have slightly different effects. But always point north to north and south to south.
The notches are looking better. You have the right idea but now make them deeper. Look at a swastika, see how the arms stretch out from the center.
Take a piece of paper and draw a cross (a giant plus sign) and begin from the top of the top line and draw a curve from the top of that line to about the middle of the line to the left. Now repeat on all four sides.
NOTE: middle of the line is not 19.5 degrees but you will get the idea.

Peace, Love & Light

[nestingwave]

Flying Pyramid,

I have been going over and over your posts here in order to get a picture of this thing in my mind so that my contemplations of it can contain some accuracy. I really want to learn this with the proper concepts so that when it comes to building one, I better know where I am going.

Here are several questions that have arisen so far.

you said:

4.) If you were to look at the pyramid straight on from the side,
Half of the pyramid would sit above the balls and the other half would rest below the balls.


This must mean that the balls too are suspended above the downward point of the pyramid since the downward tip of the inverted pyramid is BELOW the balls. Is that accurate? Perhaps the three spheres are on a ring shelf? Or do they levitate upwards also?

You also said:

Magnitite is the first step.
Develope the system on this material first and when the world understands how and why it works, then we can begin the next step.


Can you or anyone inform us as to where chunks of raw magnetite can be obtained?

Also, what method would you recommend to machine magnetite? Would it require lazer cutting? Or, would diamond tools be sufficient? Or some other method?

I also have a question concerning the "notches" on the spheres. 4 per sphere, right?

You said:

Make the spheres like the number 6.

That's more than a little cryptic but perhaps you could give a clearer hint? It could mean several things.

Look at a swastika and imagine it being rounded and the 4 arms make 4 notches.


If I was imagining a rounded swastika in the middle of a sphere would it be distorted diagonally from the axis of the sphere's rotation? 19.5 degrees at the swastika's tips from the North and South centers of rotation? Or should I imagine the rounded swastika to be on the outer skin of the sphere?


If you were to look at the sphere from the side, the notch would appear like a cresant moon, thin at the top and bottom but thick, 19.5 degrees thick, in the middle.


Does this mean that the "notches" are not round dimples as kepher shows in his gif? Are they left hand crecent moon shaped with the center 19.5 degrees from the N/S axis of rotation?

You say this whole device is somehow suspended. Does that mean that the balls are on a circular shelf or tray with the tip of the levitating inverse pyramid pointing down in the center with its tip BELOW the balls which are rotating to the 3 sides centered with the inner pyramid? And does it mean that the 4 "notches" in the balls are crecent shaped rather than round and would they be left hand or right hand crecent shapes centered north and south from the axis of the rotating spheres by 19.5 degrees away from the axis poles of the rotating spheres? In other words, do the notches appear as pointy crecent "Cs" or reversed? Possibly both ways according to the rounded swastika?

I hope these questions makes some sense.

Am I in left field or right field? :lol3:

[nestingwave]

And folks for your entertainment. TWO videos about others that are seeing plans for a Star Ship in the crop circles:

http://www.cropcircleship.com/

[Johannes]

If you draw that curve as (sqrt(5)+-1)/2 you'll be right on.

Alternatively attached drawing, courtesy Paul E Potter, depicts the very principal. In this case it happens to be four spheres set in motion which will establish a powerful vortex in the center of those spheres.

In FP's example the pyramid only rotates because of the vortex set in motion by those three rotating spheres. Same principle. No worries.

Yes, it IS a way of doing it by using 'basic' materials obtainable by the average person. FP's design does not require high tech at this stage hence is a very good learning tool and appears to be 'fairly save' to play with.

Yep, those forces set in motion can get rather ferocious.

Cheers

Johannes

[berathebrain]

I have been working on connecting famous sites all around the world using Google Earth. I have made a little program in which you can just put the coordinates of sites like this:
longitude1,latitude1
longitude2,latitude2
longitude3,latitude3
...
And you can press generate KML button and whoa la, you have KML code that just needs to be saved by your favorite text editor as .kml file. This file can be viewed by Google Earth and you will see lines that connects all those sites at the same time.
The program can be downloaded here:
http://rapidshare.com/files/167422105/Projekat_Piramide.exe.html
http://depositfiles.com/files/r5h3nipth
Maybe someone will find it useful in their search for truth and knowledge.
Best regards.

PS.
Maybe I will make this program to be like you want it to be, just tell me what you want and I will try to find a spare time and make it a little more suited to your needs. This program certainly isn't done.

[PodWORLD]

Hi I know nothing about this sort of thing but it's better to sound foolish than be silently clever.

What if there is either a magnetite plate or box that the spheres and pyramid sit over/in. Would that allow for control? Do super conductors with their aligned properties come in at any point?

Fascinating thread, science and a little mystery too.

[Johannes]

podworld,

no mysteries here at all!

All we are talking about is another way to establish a controlled vortex and make use of its properties. That's all there is to it.

Cheers

Johannes

[noblefuse]

Instead of unintentionally hijacking Gregor's thread about pyramid power and advanced mathematics i started this one.

There are a few posts on "Free Energy" and a few on debunking free energy.
So allow me to put it to rest right now.
FREE DC ENERGY does exist. It is a reality and YES it's free.
As long as we, the ground crew +, keep it free.

How do we keep it free?

By telling everyone in the world who will listen how it's made.
Keep the knowledge free and there can never be a price put upon it.

Here is the problem:
The true power of what most of us know will never be released until after the 2012 event. Only then will mankind as a whole except where and how we came across this technology.
Yes i know the secret to free everlasting free standing free dc energy but no matter what i do it will not be accepted by anyone as a valued energy source because i can not lie about where i got the information, and that caused my utter downfall a year and a half back.

Alright screw it, i'll just tell you all the truth about me:
It's to close to our time for me to be afraid any longer.

My name is Richard Scott Brooks.
In early 2006 i built a company called REVOLUTIONS inc. and a 3D animation studio called Flying Pyramid Studios, rightly named after the tech of how i came across this energy. In late 2006 after meeting a man i will refer to as "The Doctor" i tried to mass e-mail the entire world, using my company, with the technology of how to create free dc energy.
The e-mail never made it, my company was seized and shut down, i was driven from my home and have been living off the grid since then.

I recently rebuilt my company & studio and even though they threatened to eat my soul, here i am at it again.

What is FREE DC ENERGY?

Free Direct Current Energy is created by using the earths rotation and coupled together with raw magnetite.
Now you already know about the various magnet motors and other type engines, but these are still not efficient enough to power a entire city and they still need energy to start them.
Yes this is a huge step in the right direction but not big enough.

I found this information studying crop circles, the planet, the properties of true raw magnetite, the universe and ancient cultures.

Quite simply here it is at it's basic form:
First you must understand the governing bodies of a physical universe which are angular momentum and centrifugal force.
Everything in our universe including the universe itself spins and rotates (with the exception of the moon which i will address in a minute.)
Now look at the mechanics of magnets.
At there core what are they?
Mineral deposits that have 99% of there ions facing the same direction which attracts and repels others like it positive/negative.
Alot like a human huh?
Now we already know that if you file raw magnets into simple geometric shapes and place them together in a particular arrangement they do fantastic things. This particular arrangement that i'm about to tell you about is only one use.

What are the pyramids?
Well that is a complicated question as they are multi-purpose.
But i will answer a few basics.
1.) They are a blueprint of where our planet upwells energy from.
2.) They show us how to harness that natural energy.
3.) They are/were jump-gates.
4.) They are machines for self ascension (for those who chose not to wait and do it naturally)

Now place the two together.

Every magnet on this planet has a north and south polarity. +/_
However if you make a solid pyramid magnet the exact same shape and dimensions as the Giza pyramid (angles at 22.5 degrees) something weird happens to it.
If you take it above the equator it will take on a solid northern polarity.
If you take it below the equator it will take on a solid southern polarity.
No other magnet on the planet will do this.
So after looking at all the "trinity" theories and the power of 3 and after long hours of crop circle studies it hit me.
I will try to post some pics to back up what i'm saying later.
But look at the most round like cropcircles and what do you see?
3 solid magnet balls notched on 4 sides at 19.5 degrees.
Hmmm.....we have a pyramid magnet at 22.5 degrees and 3 ball magnets at 19.5 degrees.....where have i seen this before...AH HA!!
The pyramids at Giza are angled at 22.5 degrees, the earths true north and south. The little one is offset at 19.5 degrees.

So Simply place the three ball magnets with north facing north and south facing south and arrange them in a perfect Isosceles triangle the width of the very middle of your pyramid magnet. Now place the pyramid magnet point down in the center of the balls.
The pyramid will levitate and begin to spin for the same reason water spins in your drain, the earths rotation.
Congratulations you've just created perpetual motion that will never stop.
As each corner of the pyramid passes the notch of the balls dc energy will spark from the bottom of the pyramid. As it's speed increases so does the charge.

Congratulations you've just created a self propelling never ending energy source that will never deplete and needs nothing to start.
This is the biggest kept secret on the planet.

Upgrade that basic system and you will create the propulsion system of most of the starships in use today. Why? Because magnetite, just like gold, is a universal mineral that shows up on almost every planet in existence.
There is so much magnetite on this planet you could never ever run out especially because we would never need to use that great of an amount.

Uh oh, looks like i gotta run, i'll try to get back on later today or tomorrow and finish.

Thank you.
Peace, Love & Light

"When the power of love overcomes the love of power the world shall know peace."


2012 you say

You have been banned from MySpace Forums!
this is todays message for me-

banned from myspace forums- deleted several times from myspace- energy forums- so many- why- i am too bold for you-

I solved the energy crisis by myself with a ONE MILLION VOLT experiment and noone believes me- my friends dont- passer bys dont- scientists dont- noone-

all just ridicule and ignore-

no wonder there is war-

no wonder there is the holocoast

no wonder your WW3 comes-

I have been misled this entire time- i was aware of it for several months-

since I was given a message by god in 1998- i was under impression an age of unity begins- that ww2 was armegedon in order for man to move on-

and so i endevoured in my life long quest to find something the heavens have guided me to bring forth for man to make their lives better-

and now my time has come- but for the first time i needed the interaction of others- and now i find the disgust why others loves their pets more than man- why man kills one another-

I am the christ- you will not understand at this stage for your belly is full- your arrogance is high- your insight is limited-

I must wait for YOUR PREPARATION in order for mankind to move to next stage of global unity-

you are too ignorant and barbaric at this stage and you know it-

war shall fix this- this time all families will beg for food- will pray for safety of children-

if you say it is god that does this- you are wrong- for god has brought you solution but it is YOU that ignored it- AND THIS IS THE MESSAGE

the children of the future that survive shall learn even the enlightened masters of times prior are WEAK- they just watch the bullies attack- they do nothing in order to protect their own lives-

I am always filled with the HOPE that we can do it NOW without any more war- but even the christ cannot do it alone- it takes YOU

my days of screaming are coming to an end- it is your turn to scream as you lose your jobs- lose your health care - watch more children go to war over energy

my little speech in public will come after ww3
what a shame
2012

[shaundelear]

2012 you say

You have been banned from MySpace Forums!
this is todays message for me-

banned from myspace forums- deleted several times from myspace- energy forums- so many- why- i am too bold for you-

I solved the energy crisis by myself with a ONE MILLION VOLT experiment and noone believes me- my friends dont- passer bys dont- scientists dont- noone-

all just ridicule and ignore-

no wonder there is war-

no wonder there is the holocoast

no wonder your WW3 comes-

I have been misled this entire time- i was aware of it for several months-

since I was given a message by god in 1998- i was under impression an age of unity begins- that ww2 was armegedon in order for man to move on-

and so i endevoured in my life long quest to find something the heavens have guided me to bring forth for man to make their lives better-

and now my time has come- but for the first time i needed the interaction of others- and now i find the disgust why others loves their pets more than man- why man kills one another-

I am the christ- you will not understand at this stage for your belly is full- your arrogance is high- your insight is limited-

I must wait for YOUR PREPARATION in order for mankind to move to next stage of global unity-

you are too ignorant and barbaric at this stage and you know it-

war shall fix this- this time all families will beg for food- will pray for safety of children-

if you say it is god that does this- you are wrong- for god has brought you solution but it is YOU that ignored it- AND THIS IS THE MESSAGE

the children of the future that survive shall learn even the enlightened masters of times prior are WEAK- they just watch the bullies attack- they do nothing in order to protect their own lives-

I am always filled with the HOPE that we can do it NOW without any more war- but even the christ cannot do it alone- it takes YOU

my days of screaming are coming to an end- it is your turn to scream as you lose your jobs- lose your health care - watch more children go to war over energy

my little speech in public will come after ww3
what a shame
2012

Unbelieveable.....
I can tell your new to this forum.
Are you the Christ Spirit?
If you were then lets address your tone - negative?condescending?
Let us see schematics of your 1000000 volt machine or even a drawing .
Is it more likely your bitter and twisted?
I dont know.
But this site is about people who do care .
You want to preach about how we are all going to suffer go elsewhere.
So Christ if you need the interaction of others I would suggest you adjust your attitude -
If have nothing positve to say......
As for your speach after WW3 good luck with that if it turns out you are Christ but remember impersonating Jesus/Father/Spirit has got to be a mortal sin -good luck coz I can not remember Jesus endorsing WAR

[rosie]

Flying Pyramid,
Very interesting. I have had the "golden triangle" image trying to catch my attention everywhere I look.

Your presentation of your ideas have just sent my mind spinning and my ears ringing.



Thank you!
Peace & love

[Squeptikal]

1.) They are centered in the same spot spinning in revolutions ajacent to the pyramid, there center never moves from it's location much like the image posted by khepran.

2.) There is no friction because the balls and the pyramid never touch at all in anyway. They are close enought to slide a sheet of paper through but they do not actually touch. Therefor no friction, no decay.
The entire setup is suspended in some fashion and not grounded.

3.) Yes, i will have all the materials posted soon as possable.
Even if the forum goes subscription, there are people here how have expressed their ability to repost my posts here so you all can keep up with what's going on. Even though i do not agree with this as it interferes with fellowship and being able to ask/answer questions but it is nessasary.

4.) If you were to look at the pyramid straight on from the side,
Half of the pyramid would sit above the balls and the other half would rest below the balls.

Flying Pyramid,

Are you saying that:

1.) The balls are a) notched to clear the flats of the pyramid, and b) their axis of rotation is inclined my x (or 22.5 degrees), and that c) they are in synchronous rotation with the center pyramid?

2.) Might the balls be in a nonmagnetic bearing? Again, is this the axis of declination from the flying pyramid?

3.) I will also offer to forward this valuable information if Avalon permits.

4.) So the balls are notched to clear the ridges of the pyramid sides, and that from the side, the tops of these balls' axis' would be tilted in towards the center?

Thank you Flying Pyramid! :smoke:

[MaskMarvl]

I'm sure there is still days of time before the subscription goes into effect so i will be posting the diagrams, specs, and visualization art in about 24 hours.

Well... it's been a bit more than 24 hours and you still haven't posted any diagrams, specifications nor visualization art. From the 24 hour time-frame you povided, one would assume you'd have something posted by now.

What's the problem? :fisch:

[kauhane]

Much Aloha to FP for sharing, can't wait for your next post :cup:

[khepran]

Hey again,

How's this? (animation attached)

regards,

-k

[Flying Pyramid]

You say this whole device is somehow suspended. Does that mean that the balls are on a circular shelf or tray with the tip of the levitating inverse pyramid pointing down in the center with its tip BELOW the balls which are rotating to the 3 sides centered with the inner pyramid? And does it mean that the 4 "notches" in the balls are crecent shaped rather than round and would they be left hand or right hand crecent shapes centered north and south from the axis of the rotating spheres by 19.5 degrees away from the axis poles of the rotating spheres? In other words, do the notches appear as pointy crecent "Cs" or reversed? Possibly both ways according to the rounded swastika?

I hope these questions makes some sense.

Am I in left field or right field? :lol3:

Yes it is a suspended above ground and not grounded.
The spheres are not so much like c's but more like half circles.
This is the most basic setup of the idea so people can learn and understand how and why it works not just that it works.
There could be all types of shapes and notches and angles that produce different energy or fields.
What i am trying to do is change the foundation on which we build things.
Most of the world is already there, they've already figured it out but they did not have the right foundation to work off of.


And folks for your entertainment. TWO videos about others that are seeing plans for a Star Ship in the crop circles:

http://www.cropcircleship.com/

:thumb_yello:


I have been working on connecting famous sites all around the world using Google Earth. I have made a little program in which you can just put the coordinates of sites like this:
longitude1,latitude1
longitude2,latitude2
longitude3,latitude3
...
And you can press generate KML button and whoa la, you have KML code that just needs to be saved by your favorite text editor as .kml file. This file can be viewed by Google Earth and you will see lines that connects all those sites at the same time.
The program can be downloaded here:
http://rapidshare.com/files/167422105/Projekat_Piramide.exe.html
http://depositfiles.com/files/r5h3nipth
Maybe someone will find it useful in their search for truth and knowledge.
Best regards.

PS.
Maybe I will make this program to be like you want it to be, just tell me what you want and I will try to find a spare time and make it a little more suited to your needs. This program certainly isn't done.

Looks cool. could be very useful if it was programmed with the actual data of proper locations.

Hi I know nothing about this sort of thing but it's better to sound foolish than be silently clever.

What if there is either a magnetite plate or box that the spheres and pyramid sit over/in. Would that allow for control? Do super conductors with their aligned properties come in at any point?

Fascinating thread, science and a little mystery too.

Yes eventually all thing will come into play with this technology.
It, at it's base, is a physical source of electomagnetic energy.
This is the "framework" of this technology.
This applies to all things includeing organics and hyper-organics.

2012 you say

You have been banned from MySpace Forums!
this is todays message for me-

banned from myspace forums- deleted several times from myspace- energy forums- so many- why- i am too bold for you-

I solved the energy crisis by myself with a ONE MILLION VOLT experiment and noone believes me- my friends dont- passer bys dont- scientists dont- noone-

all just ridicule and ignore-

no wonder there is war-

no wonder there is the holocoast

no wonder your WW3 comes-

I have been misled this entire time- i was aware of it for several months-

since I was given a message by god in 1998- i was under impression an age of unity begins- that ww2 was armegedon in order for man to move on-

and so i endevoured in my life long quest to find something the heavens have guided me to bring forth for man to make their lives better-

and now my time has come- but for the first time i needed the interaction of others- and now i find the disgust why others loves their pets more than man- why man kills one another-

I am the christ- you will not understand at this stage for your belly is full- your arrogance is high- your insight is limited-

I must wait for YOUR PREPARATION in order for mankind to move to next stage of global unity-

you are too ignorant and barbaric at this stage and you know it-

war shall fix this- this time all families will beg for food- will pray for safety of children-

if you say it is god that does this- you are wrong- for god has brought you solution but it is YOU that ignored it- AND THIS IS THE MESSAGE

the children of the future that survive shall learn even the enlightened masters of times prior are WEAK- they just watch the bullies attack- they do nothing in order to protect their own lives-

I am always filled with the HOPE that we can do it NOW without any more war- but even the christ cannot do it alone- it takes YOU

my days of screaming are coming to an end- it is your turn to scream as you lose your jobs- lose your health care - watch more children go to war over energy

my little speech in public will come after ww3
what a shame
2012

I have no idea who or what you are but i love you anyway and god bless.

Flying Pyramid,
Very interesting. I have had the "golden triangle" image trying to catch my attention everywhere I look.

Your presentation of your ideas have just sent my mind spinning and my ears ringing.



Thank you!
Peace & love

Thank you. :original:

Flying Pyramid,

Are you saying that:

1.) The balls are a) notched to clear the flats of the pyramid, and b) their axis of rotation is inclined my x (or 22.5 degrees), and that c) they are in synchronous rotation with the center pyramid?

2.) Might the balls be in a nonmagnetic bearing? Again, is this the axis of declination from the flying pyramid?

3.) I will also offer to forward this valuable information if Avalon permits.

4.) So the balls are notched to clear the ridges of the pyramid sides, and that from the side, the tops of these balls' axis' would be tilted in towards the center?

Thank you Flying Pyramid! :smoke:

1.) Yes/maybe/depends on what setup
2.) No, the spheres must be magnetic. The inclination is decided apoun the setup and desired outcome.
3.) Sure
4.) Depends

Well... it's been a bit more than 24 hours and you still haven't posted any diagrams, specifications nor visualization art. From the 24 hour time-frame you povided, one would assume you'd have something posted by now.

What's the problem? :fisch:

Your right and i appologize.
Again, may i remind you i am always on the move and have to use what resourses i can on the go.
I am shooting for something this weekend.

Much Aloha to FP for sharing, can't wait for your next post :cup:

Thank you

Hey again,

How's this? (animation attached)

regards,

-k

Cool.
Getting better but think of half bowls rather than a notch dug out of an object. Imagine each quarter of the sphere being a half bowl.

[no caste]

Hi Flying Pyramid,

I thought you asked for some ham radio information on this thread. Now I can't find it. Sorry, if it's on a different thread - but here's the conversation, entire.

Subject: Apollo Moon Conversations Show NASA Coverup

The following are excerpts of conversations from Apollo Astronauts on the Moon to Mission Control - which show that the Astronauts came across some strange and hard-to-explain structures and unusual sightings of unidentified craft - while on the surface of the Moon.

These unusual findings, when added together with the anomalies which Richard Hoagland has shown to exist on Apollo Moon photographs, provide compelling evidence for an ongoing NASA coverup of what the Apollo Astronauts really discovered on the Moon from 1969 to 1972.

The following Apollo Astronaut conversations were mostly taken from the out-of-print book "Our Mysterious Spaceship Moon" by Don Wilson (Dell, 1975):






-- ------------------------------------------------------------------------------



1) Apollo 16 Mission: April 16 - 27, 1972;
Charles Duke, Thomas Mattingly and John Young land in the Descartes highlands:


Duke: These devices are unbelievable. I'm not taking a gnomon up there.
Young: O.K., but man, that's going to be a steep bridge to climb.

Duke: You got - YOWEE! Man - John, I tell you this is some sight here. Tony, the blocks in Buster are covered - the bottom is covered with blocks, five meters across. Besides the blocks seem to be in a preferred orientation, northeast to southwest. They go all the way up the wall on those two sides and on the other side you can only barely see the out-cropping at about 5 percent. Ninety percent of the bottom is covered with blocks that are 50 centimeters and larger.

Capcom: Good show. Sounds like a secondary ...

Duke: Right out here ... the blue one that I described from the lunar module window is colored because it is glass coated, but underneath the glass it is crystalline ... the same texture as the Genesis Rock ... Dead on my mark.

Young: Mark. It's open.

Duke: I can't believe it!

Young: And I put that beauty in dry!

Capcom: Dover. Dover. We'll start EVA-2 immediately.

Duke: You'd better send a couple more guys up here. They'll have to try (garble).

Capcom: Sounds familiar.

Duke: Boy, I tell you, these EMUs and PLSSs are really super- fantastic!


It is obvious that the astronauts are talking in code - meant to disguise what they are referring to. The big question is why the excited cries? Can this be *merely* due to the collecting of Moon rocks, as they would have us believe? Or did they find something much more substantial, which was not meant for public knowledge?

http://www.v-j-enterprises.com/astro2.html

-------------------------------------------------

As well, in there is what I think is a lot of activity lately. E.g.

1. 20 Jan 2008. Lunar Echo Experiment looking for Amateur Radio Participants (Jan 17, 2008 [REVISED Jan 18, 2008 10:26 ET]) -- The HF Active Auroral Research Program (HAARP) in Alaska and the Long Wavelength Array (LWA) in New Mexico are planning an additional lunar echo experiment for January 19-20. Interested radio amateurs are invited to participate in this experiment by listening for the lunar echoes and submitting reports.

http://www.arrl.org/?artid=7958"]http://www.arrl.org/?artid=7958

2. February 2008. China's moon song.
http://www.sinoptic.ch/embassy/enviroscience/pdf/2008/200802-44.pdf

3. Nov 14, 2008. India's probe lands on moon.
http://www.panasianbiz.com/2008/11/chandrayaan-1-impact-probe-lands-on-moon/

[berathebrain]

Looks cool. could be very useful if it was programmed with the actual data of proper locations.

There is an example of actual data when you start the program. Try entering just three coordinates and you will see how it works. Here is an example of what to type in:

-155.4602778,19.8008333
-98.84379,19.692547
-89.75,19.5166667

And that's it. Now you just press the button "Generate KML" and you have your kml code.

[Flying Pyramid]

Hi Flying Pyramid,

I thought you asked for some ham radio information on this thread. Now I can't find it. Sorry, if it's on a different thread - but here's the conversation, entire.

Subject: Apollo Moon Conversations Show NASA Coverup

The following are excerpts of conversations from Apollo Astronauts on the Moon to Mission Control - which show that the Astronauts came across some strange and hard-to-explain structures and unusual sightings of unidentified craft - while on the surface of the Moon.

These unusual findings, when added together with the anomalies which Richard Hoagland has shown to exist on Apollo Moon photographs, provide compelling evidence for an ongoing NASA coverup of what the Apollo Astronauts really discovered on the Moon from 1969 to 1972.

The following Apollo Astronaut conversations were mostly taken from the out-of-print book "Our Mysterious Spaceship Moon" by Don Wilson (Dell, 1975):






--------------------------------------------------------------------------------



1) Apollo 16 Mission: April 16 - 27, 1972;
Charles Duke, Thomas Mattingly and John Young land in the Descartes highlands:


Duke: These devices are unbelievable. I'm not taking a gnomon up there.
Young: O.K., but man, that's going to be a steep bridge to climb.

Duke: You got - YOWEE! Man - John, I tell you this is some sight here. Tony, the blocks in Buster are covered - the bottom is covered with blocks, five meters across. Besides the blocks seem to be in a preferred orientation, northeast to southwest. They go all the way up the wall on those two sides and on the other side you can only barely see the out-cropping at about 5 percent. Ninety percent of the bottom is covered with blocks that are 50 centimeters and larger.

Capcom: Good show. Sounds like a secondary ...

Duke: Right out here ... the blue one that I described from the lunar module window is colored because it is glass coated, but underneath the glass it is crystalline ... the same texture as the Genesis Rock ... Dead on my mark.

Young: Mark. It's open.

Duke: I can't believe it!

Young: And I put that beauty in dry!

Capcom: Dover. Dover. We'll start EVA-2 immediately.

Duke: You'd better send a couple more guys up here. They'll have to try (garble).

Capcom: Sounds familiar.

Duke: Boy, I tell you, these EMUs and PLSSs are really super- fantastic!


It is obvious that the astronauts are talking in code - meant to disguise what they are referring to. The big question is why the excited cries? Can this be *merely* due to the collecting of Moon rocks, as they would have us believe? Or did they find something much more substantial, which was not meant for public knowledge?

http://www.v-j-enterprises.com/astro2.html

-------------------------------------------------

As well, in there is what I think is a lot of activity lately. E.g.

1. 20 Jan 2008. Lunar Echo Experiment looking for Amateur Radio Participants (Jan 17, 2008 [REVISED Jan 18, 2008 10:26 ET]) -- The HF Active Auroral Research Program (HAARP) in Alaska and the Long Wavelength Array (LWA) in New Mexico are planning an additional lunar echo experiment for January 19-20. Interested radio amateurs are invited to participate in this experiment by listening for the lunar echoes and submitting reports.

http://www.arrl.org/?artid=7958"]http://www.arrl.org/?artid=7958

2. February 2008. China's moon song.
http://www.sinoptic.ch/embassy/enviroscience/pdf/2008/200802-44.pdf

3. Nov 14, 2008. India's probe lands on moon.
http://www.panasianbiz.com/2008/11/chandrayaan-1-impact-probe-lands-on-moon/


I did reffer to ham radio reciever transmissions in the "Project Avalon General Discussion" forum under the thread "19.5 + 22.5, 38th Paralell, Erth/Galaxy/Universe Energy Hotspots & other random info".
The mention was for the transmission that was broadcasted last, before NASA started scrambling all the transmissions after that.
You can find it on the net somewhere.
It was from a female astronaut that said "Huston, we have crossed the 'Centient Barrier' and regained conciousness".

Hmmm...this tells me that they had to be asleep to cross this barrier.
Why?.....Anyone?

P.S. Reply to this post in the appropriate thread located here: http://www.projectavalon.net/forum/showthread.php?t=8031&page=2

[khepran]

...because the individual consciousness field leaves the body when asleep.

on another topic, please see attached concept. I guess this would be like 1000x slower than the real thing...ciao, k

[Spiritelemental]

Fascinating concept Richard!! I too have spent a great deal of time studying the crop circle patterns and Ive made a lot of sense out of it. Thank you for giving this information!!! I have been building many different designs of various free energy machines but have failed to succeed so far.

This clip reveals alot.

http://www.youtube.com/watch?v=GRz0a2qiCtc

I recreated this experiment to see for myself the magic. :)

http://www.youtube.com/watch?v=gxSoKFbcrhQ


I may try to build your device, since it sounds completely plausable.

Thanks once again!!

[Paramartasaya]

Hi, here you can download information about free energy motors, there is good information for making free energy motors that can run any generator and power your entire house.

The secret in this motors is Hi DC voltage and very low amp. Hi Static electricity is the key, RADIANT ENERGY, cold electricity.


http://rapidshare.com/files/16896864...otors.pdf.html

http://rapidshare.com/files/16896864..._2008.pdf.html

http://rapidshare.com/files/16896864...maget.pdf.html

http://rapidshare.com/files/16896864...upply.pdf.html

http://rapidshare.com/files/16896864...30806.pdf.html

http://peswiki.com/index.php/Review:Electric_Motor_Secrets_DVD_by_Peter_Lindema nn

http://www.youtube.com/watch?v=7_4m4WCKbew

http://jnaudin.free.fr/html/qmmv11.htm

[Flying Pyramid]

...because the individual consciousness field leaves the body when asleep.

on another topic, please see attached concept. I guess this would be like 1000x slower than the real thing...ciao, k

Now you've got it. Mahe the notches more like extentions of the sphere and not so much like carvings.
But yes this is the very basic idea.
Btw, what are you useing to make the image?

Fascinating concept Richard!! I too have spent a great deal of time studying the crop circle patterns and Ive made a lot of sense out of it. Thank you for giving this information!!! I have been building many different designs of various free energy machines but have failed to succeed so far.

This clip reveals alot.

http://www.youtube.com/watch?v=GRz0a2qiCtc

I recreated this experiment to see for myself the magic. :)

http://www.youtube.com/watch?v=gxSoKFbcrhQ


I may try to build your device, since it sounds completely plausable.

Thanks once again!!

Cool. Yes everyone is heading in the same direction and would have eventually landed at this conclusion, i just wanted to speed things up a little. Once scientists base thier theories and work on this base concept they will begin to rediscover the "forbidden knowledge".

Hi, here you can download information about free energy motors, there is good information for making free energy motors that can run any generator and power your entire house.

The secret in this motors is Hi DC voltage and very low amp. Hi Static electricity is the key, RADIANT ENERGY, cold electricity.


http://rapidshare.com/files/16896864...otors.pdf.html

http://rapidshare.com/files/16896864..._2008.pdf.html

http://rapidshare.com/files/16896864...maget.pdf.html

http://rapidshare.com/files/16896864...upply.pdf.html

http://rapidshare.com/files/16896864...30806.pdf.html

http://peswiki.com/index.php/Review:Electric_Motor_Secrets_DVD_by_Peter_Lindema nn

http://www.youtube.com/watch?v=7_4m4WCKbew

http://jnaudin.free.fr/html/qmmv11.htm


Again all useful but will be more suficient once it is based on harnessing the earths natural dc charge and trying to create thier own motion.
The motion is already there you just have to harness it.


Flying Pyramid

[nestingwave]

Hey again,

How's this? (animation attached)

regards,

-k
khepran,

Just wanted to say "thank you" for these great gifs and your creativeness as the vision of this thing graduallly unfolds.

[Spiritelemental]

Hi Richard,

Where can one buy Magnetite? just curious, thanks.

[khepran]

Flying Pyramid,

Hey, alright! It's been fun. Learning Maya, used nurbs on the magnet spheres, converted to polys for the animation. Seems like the magnet spheres spin perpendicular to the ground plane, it fits better that way based on your descriptions. Don't know if they spin counter-clockwise as shown. Good luck to whoever builds it {and please send me one}. The frame or supports would look cool like this style, using brass and other non-magnetic metals;

http://www.cinemablend.com/moviereviews/images/darkcrystal/5.jpg

Carbon fiber would seem to work for the frame. Any engineers out there?
Anybody want to design the structure that holds the spinning pieces in place?

nestingwave,

what a nice thing to say, thank you. I'm here to serve...

[kauhane]

Aloha FP,
is it possible to cast a mold & inject it with melted magnetite?
will that affect the magnetism?
or is this something you would need exotic tools to create?

[PartOfOne]

Hi Richard,

Where can one buy Magnetite? just curious, thanks.

http://www.magnetsales.com/index.htm here is a link to get the magnetite made, a very knowledgable site.

Blessings to all

[kauhane]

just found a magnetite compound/powder manufacturer
check it
http://www.magneticpowders.com/magnetic-compound.html

[Paramartasaya]

Hi, Flying pyramid, please tell me a practical way that I can obtain electricity to power my house, out of your project with the pyramid and the balls.

[Alterego]

http://www.supermagnetman.net/product_info.php?cPath=38&products_id=336

Hope this can help anyone who is looking to try some experimenting of their own

and also...
http://www.supermagnetman.net/product_info.php?cPath=43&products_id=461

a good starting point in my opinion, and won't break the bank either

[Spiritelemental]

Hey friends, I figured it out.

Take 8 triangle pyramids all identical in shape, each with 4 sides so that the base also forms a triangle.

4 of them will have their north pole centered at one point, and the south pole centered on the triangle surface that is on the exact opposite side of that point.

The other 4 triangles will have the same shape but will have their poles reversed so that their south pole is on a single point of the triangle pyramid, while the north pole is spread out over the surface of the side of the pyramid that is exactly opposite to the point.

Now, take the first 4 and push them together so that all of their south poles are facing each other and the points of each is barely touching each other. They will look like a 3 dimensional triforce shape from the Zelda nintendo games. They will all want to repel each other, so you might have to glue them together or something.

Now, take the other group of 4 triangle pyramids. You will want to create the exact same arrangement as with the first 4 but these 4 will fit together with the first 4 so that they form a stable magnetic formation. They should fit together perfectly with the first four. Arrange them so that their north pole surface face fits into the gaps left in the first group. Remember they had their south faces all forced together. The second group with its north faces will attract and balance the first 4 and cause a magnetic balance to form, so that you could infact remove the glue you used with the first group, after they were joined with the second group.

It should look like a star tetrahedron when its done. This picture shows 7 of them.

http://www.freewebs.com/cropcirclelanguage/SCAN0024.JPG

This magnetic model is based upon how nature really works and how the universal components arrange themselves naturally. It has been shown before.

http://www.freewebs.com/cropcirclelanguage/windmillhill2002afull.jpg

This animation shows some of the base concepts if you are unfamilair with these kinds of things.

http://www.youtube.com/watch?v=HTPvGpam1zY&feature=channel_page


Peace,
SE

[asteram]

'fraid I'll have to call BS on this, flying pyramid. Enough with the cryptic crapola. It's time to put up or shut up. If you have a pencil, sketch the design on a piece of paper, scan it, post it. I don't think you know what you are talking about, and your reply on the last page to the person asking about whether or not the race for the balls needs to be non-magnetic pretty much proves my point.

Too bad; I've waited two weeks to see if you were full of bull or not. Looks like you are.

As for kephren's cool animation, nice work. Question would be who is doing the spinning? Seems to me either the balls are spinning or the pyramid is, not both, or you won't induce a current flow.

[Skylark]

'fraid I'll have to call BS on this, flying pyramid. Enough with the cryptic crapola. It's time to put up or shut up. If you have a pencil, sketch the design on a piece of paper, scan it, post it. I don't think you know what you are talking about, and your reply on the last page to the person asking about whether or not the race for the balls needs to be non-magnetic pretty much proves my point.

Too bad; I've waited two weeks to see if you were full of bull or not. Looks like you are.

As for kephren's cool animation, nice work. Question would be who is doing the spinning? Seems to me either the balls are spinning or the pyramid is, not both, or you won't induce a current flow.

Ouch!

Seems to me that the principle of 3 stationary magnetic spheres of the right size compared to the magnetic pyramid would cause the pyramid to float firstly when placed in between them as outlined then spin due to the opposition of 3 spheres to 4 pyramid sides. Due to the coriolis effect? It does make sense...
'Notching' or shaping the spheres as mentioned and to the shape alluded to in the crop circle, (the animation doesn't show that yet, if I am reading the crop circle picture correctly) if that is what it IS alluding to would suggest to me that the spheres would spin in the other direction to the pyramid, amplifying the effect? Need to look at it as I only saw this thread yesterday so will check out the links and get a closer look at the truth of whether this would work or not as time allows, over xmas hopefully.

I described this thread to a friend yesterday in work. We are an engineering firm, and we are going to try this. Next week we're going to get to finding some magnetite. We have a few ideas if how to shape it by water jet cutting or mounting and grinding then using an abrasive tumbler to round and polish the spheres.
If magnetite is not available or too difficult to machine cast iron would be easier to make the pieces from.

Starting with larger spheres then in the animation (as a start point just guessing at the relative strength of the magnetism of the spheres compared to the pyramid we'll see if it floats first. It seems as if it would. This ties in with the device in coral castle, which appears to have a circle of magnets, an inverted pyramid, and a mechanism for spinning part of the device.

A frame to hold the spheres in place, static at first then free to rotate OR be driven if necessary, to see what happens, would be easy enough to make.

Don't come back and answer that if you drive the device you use power so therfore its not free energy, I mean it can be experimented with to see, and if it was necessary then one would need to measure output against input to check whether free energy is being produced.

A mechanism to push the pyramid down would be easy enough to make too.

Playing with the relative sizes of the spheres and pyramid at first to see if the principal works wouldn't need this last bit I think, if the pyramid was heavy enough to force itself down to the correct (ish) position.

This is definitely worth trying IMO. Spinning magnetic pyramid as someone stated will result in spinning magnetic field, harnessable by placing a stationary coil around it. If there;s a discharge from the pyramid tip surely that could be harnessed too. I'm not an elecrical engineer so I don't know, but there must be some way that can be done relatively easy. If the tip of the pyramid is fine or anyway if the charge available is high it'll arc off it so it surely can be collected? Electrical engineers? This doable?

[PartOfOne]

Ouch!

This is definitely worth trying IMO. Spinning magnetic pyramid as someone stated will result in spinning magnetic field, harnessable by placing a stationary coil around it. If there;s a discharge from the pyramid tip surely that could be harnessed too. I'm not an elecrical engineer so I don't know, but there must be some way that can be done relatively easy. If the tip of the pyramid is fine or anyway if the charge available is high it'll arc off it so it surely can be collected? Electrical engineers? This doable?

:thumb_yello:
With the research I've found and the connection of matterial that is mentioned I would have to agree with you. Once the "How" is determined we will have to worry about the political aspect of keepping the forces at large from stopping the spread and development of the technology.

:sweatdrop:

[asteram]

Skylark-

That was I who mentioned that a moving magnetic field will induce current in a wire. Gregor also pointed out early in the thread that the pyramid is 4 sided while there are only three balls, inferring that there would be torque induced in the pyramid (or the balls) to attempt to line up with one fewer or one extra magnetic field.

So far so good. Easy enough to try it; order some magnetic balls from one of the magnet suppliers, make or order a pyramid magnet. I wouldn't bother with magnetite unless alnico or cast iron won't work; can't see why they wouldn't work and they are easier to obtain. I think one can buy the alnico powder and pour it into a mold, which would be the easiest way to try different pyramid shapes. I'm leaving out the details such as sintering the powder and magnetizing, but those are easy enough to research.

glue the balls down on a flat ring (hot glue), drop the pyramid point-down in the center and see what happens. The pyramid will probably try to fly off or line up and stick to one of the balls. If so, glue a thread to its top point and the middle of its base and try again while holding the threads tight.

Those two experiments should at least tell if something wants to or is going to happen.

The poster Flying Pyramid may or may not be on to something here. This could be something they thought up or dreamed or whatever, but from what I've read I don'tget the impression they have a clue what they are writing about.

Doesn't mean it couldn't work, but the confusion about the pyramid's angles and the cup-shaped machined balls etc make me pretty doubtful about their personal veracity. If this was my baby and I wanted to give it to the world, and I understood it, I would have done a better job.

[khepran]

...

[khepran]

another view of a design concept for the frame. My concerns are simplicity while being pleasing to the eyes, also. Any ideas about this concept? Ways to improve it?

[Northern Boy]

I'm trying to see all of this in my mind's eye and it appears very realistic...I think I remember somewhere that magnets can be used for healing illnesses as well.

Q link braclets are made with magnets you will find alot of avid golfers and tennis players wearing them

[asteram]

Looks good to me, khephran. That's the concept as I envision it. What I would add to the idea:

The frame needs to be an easily available non-magnetic material; plastic, even wood; if metal, aluminum would be a good choice.

The pyramid would need to be held in position from its bottom point as well. An aluminum rod epoxy-glued to the tip would do that. It needs to be free to rotate. The simplest way to do that would be to put a point on the ends of its supporting rods and have the points resting in a little cone-shaped cup that could be oiled or greased.

The pyramid should also have a means of adjusting it up or down, closer to or further away from the balls. That's a little trickier to do unless the pyramid was drilled through its length and had a set-screw tapped into it to lock it in place on the rod, or a ring and set-screw glued to the base. Another idea would be to have the rods supporting the pyramid going through ball bearings, with a locking collar at each end that could be loosened and moved, once again to be able to adjust it up and down.

I'm also wondering about the N-S magnetic fields of the pyramid; assuming N is down on the pyramid, and N is up on the balls, would it just float or would it try to spin? What effect would steeper sides have? Could the pyramid be made so that the sides alternated N-S-N-S? Would that do anything?

Understand that I'm just thinking out loud here. Hopefully one of the other readers is actually trying this out.

[Zeddo]

There is no such thing as free energy.

Even if this theory was sound and worked, you'd have costs in setting it up and initiating it. From the mining and refining of the materials needed, to the professionals needed to plan how it works, to the building of the devices needed, to replicating it all over the world.

Like anything, you've got costs to meet, oh and wages to pay, therefore, you'd need to "sell" your free energy to be able to make the money to enable you to get it out there.

Wind energy is free. Wind costs nothing. But the turbines do!

NOTHING on this earth is free and nothing ever will be because we cannot live with out buying, selling, bartering and trading.

Could I suggest that this is "old-slave-world" thinking. I do not mean to be derogatory here, but if we are to move forward, TRULY move forward, don't we need to break all the old paradigms that were set in place for our enslavement. Why aren't we looking at the "Project Venus Model". Why do we base something as seemingly radicle as what Flying Pyramid has posted here on old paradigm thinking?. Why are will still thinking in monetary terms? Of what use are we, as a so-called "ground-crew" (and please excuse my scepticism on this ground crew thing) if we cannot band together, each with their different talents and use this site for what it is meant? I am no physicist but I can build things. Some-one else can draw plans, some-one else can do machining.........get my drift? Why are we not rather concentrating on being positive and figuring out why this CANNOT work, rather than why it can. If we are going to take this whole ground crew philosophy seriously, may I suggest we rethink why we are here and actually start to work in unity for the good of all?

Love, Light and peace to all.

[Lorien]

Just got done reading through all of this and it's quite fascinating. Especially since I have been doing experiments and researching magnetism in my spare time for a few years now.

Any reason there have been no further posts in this thread since december? Did everyone give up and did FP leave us?

[Dantheman62]

Yes Flying Pyramid is long gone plus most others in this thread, mostly due to the forum going to subscription. I don't think he actually gave us all the info either, which I really don't understand. If I had an idea or if I was a whistleblower I'd play the whole song, not just a few notes.

[Lorien]

It's sad that a mere $5 can keep people away.

[iainl140285]

Yes Flying Pyramid is long gone plus most others in this thread, mostly due to the forum going to subscription. I don't think he actually gave us all the info either, which I really don't understand. If I had an idea or if I was a whistleblower I'd play the whole song, not just a few notes.



And thats what makes you one of the good guys my friend :original::thumb_yello:


Peace
Iain

[Dantheman62]

:wink2: :original:

[mu2143]

Here is interesting guide to free energy plus blue prints

http://www.zoeken.nl/?vid=l8721016651I1237022040&q=Patrick_Kelly_Free_Energy_Guide.pdf&qs.x=32&qs.y=13&where=web

It should be 20584 Kb long

[Legend]

Hmmmmm,
This all seems very hard to believe,
I skipped threw the info and i do have a few questions,

Like, I heard magnetite doesn't repel? how else does it levitate?
I heard it's weak?
Magnetite is hard to find because it has no commercial use,
Though i now have a big chunk of it heading my way thanks to contacts,

Also what type of magnets are we using for the ball magnets?
Are they perfect Spheres?
If there is a choice, How are they magnetized?

Are the ball magnets suspended in the air on poles, or some type of holder?

Which way do the ball magnets face? North and South pole of the ball magnet?

So many questions,
Though not many answers,
I ask you to please help me out here,

Because unlike a lot of other people here i have magnetite that i can obtain, i know a guy who can machine it perfectly, to the perfect Millimeter.

I'm only 15,
Though i am very interested in this,
Thus why i signed up ;)



I know not with what weapons world war III will be fought,
but world war IV will be fought with sticks and stones.
-- Albert Einstein.
Truth, Peace, Love, Freedom.

[Skylark]

hello, hello
its been ages since I've been on here!
been off Avalon as have been very busy of late.
I have ordered magnets at long last to try this out so they will be arriving in the next week or so and I will give this a try.

However, I am pretty confident this will work.
I've been looking at a lot of videos of magnet motors on youtube and the principal is simple and sound. Also been reading a lot about Tesla and in one book is a quoted admission by Hyundai engineers that yes a magnet motor based on a stator and rotor with different spacings (as would be the case in this set up) is absolutely a thing that works, only its been repressed by the usual suspects and they are not allowed to try it out in a car.
Have a look at the magnet motor thread in this section of Avalon, there's loads of them, working and everything.

[Legend]

Yes, Though Skylark, Magnetite is what you need. Are you going to use magnetite, Are you making the pyramid concept?

[DJModer]

hello, hello
its been ages since I've been on here!
been off Avalon as have been very busy of late.
I have ordered magnets at long last to try this out so they will be arriving in the next week or so and I will give this a try.

However, I am pretty confident this will work.
I've been looking at a lot of videos of magnet motors on youtube and the principal is simple and sound. Also been reading a lot about Tesla and in one book is a quoted admission by Hyundai engineers that yes a magnet motor based on a stator and rotor with different spacings (as would be the case in this set up) is absolutely a thing that works, only its been repressed by the usual suspects and they are not allowed to try it out in a car.
Have a look at the magnet motor thread in this section of Avalon, there's loads of them, working and everything.

In case that you are successful in making such device. It would be great if you can share it to the world. Plan for a full disclosure and get as much detail out as possible so that others can easily duplicate.
Although we can make no real money out of this invention, it is served as a very good tool to wake people up. Once the knowledge is wide spread, it is just a matter of time that the system start to fall apart.

Good luck

[Legend]

In case that you are successful in making such device. It would be great if you can share it to the world. Plan for a full disclosure and get as much detail out as possible so that others can easily duplicate.
Although we can make no real money out of this invention, it is served as a very good tool to wake people up. Once the knowledge is wide spread, it is just a matter of time that the system start to fall apart.

Good luck

I'm waiting on some magnetite to get here, and if i am successful at making a one pole magnet, I'll then know that I'm 3/4 the way there. I'll be posting keeping everyone up to date.

Anyone know if Magnetite works exactly like a normal everyday ferrite magnet? like repels, and attracks, North and South pole, I've tried researching but not having much luck.

I do know the Chinese use to use magnetite or (lodestone as it's second name) as some sort of compass by hanging some upside down.

I'll keep in touch.
We will bring this system down one way or another.

[Skylark]

Well I'm just going to give it a go so I'll let you know how I get on. Maybe it won't work but I think it will.
Here's a magnet motor working, YouTube - Perendev magnetic motor
If this works then the pyramid one should work, its the same principle. Just need to mount the component parts in a workable way. Surely you could also have more than 3 sphere magnets as long as you had an uneven number. Also surely it would work with more regular shaped magnets as long as they were mounted to suit the angle of the pyramid.
All things that can be tried.
I've ordered neodium magnets to mess about with, if it absolutely has to be magnetite I'll get some of that. Would neodium not work?

[Legend]

Well I'm just going to give it a go so I'll let you know how I get on. Maybe it won't work but I think it will.
Here's a magnet motor working, YouTube - Perendev magnetic motor (http://www.youtube.com/watch?v=PFGiWiXMHn0)
If this works then the pyramid one should work, its the same principle. Just need to mount the component parts in a workable way. Surely you could also have more than 3 sphere magnets as long as you had an uneven number. Also surely it would work with more regular shaped magnets as long as they were mounted to suit the angle of the pyramid.
All things that can be tried.
I've ordered neodium magnets to mess about with, if it absolutely has to be magnetite I'll get some of that. Would neodium not work?

Yeah i've seen that magnetic motor before, i also found some **** designs of it, using like coin shape magnets by the look of it, something about magnetic shielding as well. Neodymium magnets might work, Flying pyramid said something about other races using other types, though the first one they all started off with was magnetite, because it was natural and forms on every planet.

something like that. I'm very interested in magnetite because for some reason some pictures show that the natural formation seems to be forming Pyramids on the rock.

Just makes this whole concept more believable.

Yeah uneven number, Causing it to realign over time, though the pyramid only has 4 sides don't forget, though i get what your saying, maybe putting 11 or 15 magnets around it would cause the same effect.

Makes you think.

[Legend]

Magnetite



It's not as easy as it looks, you have two types, one is magnetized and one isn't, I'm guessing Magnetized Magnetite is what we want, and i figured that you want it naturally magnetized rather then getting it magnetized yourself.

creating a one pole magnet, hmmmm, doesn't seem right, i mean everything has 2 poles, the planet has 2 poles, how can a magnet have one pole, how is it even a magnet if thats the case? abit confused, maybe theres more to it then just that.

I have a miner keeping a eye out for me that is currently working on a conveyor belt that he sorts threw the ores that come threw, he is the one that told me there are two different types of magnetite, and it's rare for him to come across the Magnetized type.

hmmmm,
Hopefully he comes across some, i need to see if this is right!

Peace be with you all.

[Flying Pyramid]

Hello Friends,
now that Avalon is free again im back.
This thread has officially been resurected! :trumpet:

[SieS]

Welkom back Flying Pyramid. Time is ready for free energy it seems....
The story continues

[stargate22]

Well, if ya really want it .....then build one ! :zip:

http://www.28an.com/altenergypro/gallery.htm

Pick which model ya want....Donald L. Smith...do the "Google" thang!


Git 'em while ther HOT!!!! :lmao:


What's the problem?

[stargate22]

Even "Uber-Unity", again I don't understand the problem? :lmao:

[Flying Pyramid]

Welkom back Flying Pyramid. Time is ready for free energy it seems....
The story continues

Thank you.
This truth has been circling around know for over a year and i find it everywhere now.
Sientists and all differet kinds of people are putting this idea to use some with there own allready ideas to fill in the gap.
It's the idea of how energy works and how to properly harness it.
This is the knowledge i wish to spread.
People must understand this simple basics.
That all energy is alive and it must be respected.
Most of the world spends to much time learning way to manipulate energy to produce an unnatural effect instead of learning how to naturally.

[chelmostef]

Hi Flying Pyramid welcome back!

Bumped into your thread yesterday. It sounds truly amazing what you have discovered or re-discovered. :thumb_yello:

I have a few questions, if I may?

Magnetite is this what you used or would plain magnets work?

The propotions of the pyramid do these need to be precise propotions?

Where do the notches go on the spheres? Have you any pictures?

How are the sparks generated?

Hope I have not asked to many questions. It sounds very very intresting what you have discribed.

Stef

[Flying Pyramid]

Hi Flying Pyramid welcome back!

Bumped into your thread yesterday. It sounds truly amazing what you have discovered or re-discovered. :thumb_yello:

I have a few questions, if I may?

Magnetite is this what you used or would plain magnets work?

The propotions of the pyramid do these need to be precise propotions?

Where do the notches go on the spheres? Have you any pictures?

How are the sparks generated?

Hope I have not asked to many questions. It sounds very very intresting what you have discribed.

Stef


Hello chelmostef,
thank you it's good to be back.
There is no such thing as too many questions.
When people stop asking questions then i would worry. ;)

Magnitite is what was proposed to me when i came accross this technology.
There are two types, magnetic and nonmagnetic which is also called loadstone.
Other materials can be used but the idea is how magnitite forms/is grown.
The energy signiture of it. It's capability to harness & dispurse energy flow.
How it resonates with the human bio-energy.
It is a muti-purpose use of the material.

The pyramids have to be the exact shape for the base model.
Other models have different configurations.

The spheres are also a basic model design.
Think of a swaztika. If you were looking down from the top at a sphere it would apear like a swaztika.
The notches are from north to south and from the side of the sphere it would look like 4 cresant moons.
The spheres are not tchnichally "notched" the sphere is manufactured at a 19.5 thick angle. So if you were to follow thw geometry of one of the arms from the outmost point to the start of the next "notch" it would eventually make the spiral. (the number 6 )

There are some sparks at the first, 1 or 2 maybe, but sparks dont come off of the pieces. Rather energy gathers at the bottom of the point of the pyramid.

I will be posting pictures and schematics and so on, but remember its the idea that im offering not the difinite answer.
The knowledge is my gift, not the intricet details.

[chelmostef]

Hello chelmostef,
thank you it's good to be back.
There is no such thing as too many questions.
When people stop asking questions then i would worry. ;)

Magnitite is what was proposed to me when i came accross this technology.
There are two types, magnetic and nonmagnetic which is also called loadstone.
Other materials can be used but the idea is how magnitite forms/is grown.
The energy signiture of it. It's capability to harness & dispurse energy flow.
How it resonates with the human bio-energy.
It is a muti-purpose use of the material.

The pyramids have to be the exact shape for the base model.
Other models have different configurations.

The spheres are also a basic model design.
Think of a swaztika. If you were looking down from the top at a sphere it would apear like a swaztika.
The notches are from north to south and from the side of the sphere it would look like 4 cresant moons.
The spheres are not tchnichally "notched" the sphere is manufactured at a 19.5 thick angle. So if you were to follow thw geometry of one of the arms from the outmost point to the start of the next "notch" it would eventually make the spiral. (the number 6 )

There are some sparks at the first, 1 or 2 maybe, but sparks dont come off of the pieces. Rather energy gathers at the bottom of the point of the pyramid.

I will be posting pictures and schematics and so on, but remember its the idea that im offering not the difinite answer.
The knowledge is my gift, not the intricet details.


Wow! This sounds amazing!!!!

Im trying to visullize how you describe the spheres, I think I will have to think abount this.

Are the pyramids grown out of the magnitite in the shape of a 22.5 degree pyramid? Can one be filed into this shape? Does scale matter when making this? Is there a relationship between the size of the pyramid and size of the 4 spheres?

Are the spheres held in position by somthing non-ferris? What relationship are these held at in relation to each other?

Thank you for answering my questions, I have just discovered your other thread and reading that now as well.. I cant convey how amazing this sounds.. :mfr_omg::thumb_yello: One more question does this relate to anthing from crop circles?

Stef

[Flying Pyramid]

Wow! This sounds amazing!!!!

Im trying to visullize how you describe the spheres, I think I will have to think abount this.

Are the pyramids grown out of the magnitite in the shape of a 22.5 degree pyramid? Can one be filed into this shape? Does scale matter when making this? Is there a relationship between the size of the pyramid and size of the 4 spheres?

Are the spheres held in position by somthing non-ferris? What relationship are these held at in relation to each other?

Thank you for answering my questions, I have just discovered your other thread and reading that now as well.. I cant convey how amazing this sounds.. :mfr_omg::thumb_yello: One more question does this relate to anthing from crop circles?

Stef

Size matters but not scale ;).
Its the configuration of the setup.
The sacred geometry dictates at what level you harness the surrounding energy. So it could fit in the palm of your hand and power the entire planet forever......if one had the proper configuration. ;)

Magnitite natural grows as an octohedren. It must be filed into the proper shape. Its the ionic flow that you want to pay attention to.
The size of the f objects are relativly equal.
The exacts are for you to figure out.
My goal is to teach people to learn in a more full natural way.
In my opinion people think unnaturally.
Noone follows their instints anymore or notices anything beyond concrete and steel.

[berathebrain]

So, does the spheres looks something like in the file that I have attached?

There are many angles in a pyramid. I have attached the pyramid picture with possible angles (angle 1,2,3,4 and 5) that you describe as 22.5 degrees. Could you please tell us to what exactly angle do you refer.

Thank you for your patience and teachings.

[Flying Pyramid]

Hello berathebrain,
The sphere pic is accurte with only one issue:
make the very outer most arms the circle with the arms cut into it.
Right now you have it as the green circle being a sold circular sphere with pertruding arms.
Make the tip of the arms the green circle.

The angle in question is the angle that pass the spheres as it rotates.
The pyramid is formed to create a 22.5 degree angle along its side corners.

[berathebrain]

Thanks for your reply.

So is it something like in the picture that I have attached?

So, to summerize about the pyramid.
Scale is not important.
The pyramid is the same proportions as the Great Pyramid of Giza.
Does that implies that angle of sides is based on Pi or Phi?
The angles are very similar.
Angle based on PI is 51 degrees, 51 minutes and 14.31 seconds
while angle based on Phi is 51 degrees, 49 minutes and 38.25 seconds.
I think many people think that the Great Pyramid of Giza has equilateral sides as the Half of an Octahedron does, but that is not the case. When you put the Great Pyramid inside the sphere, the tip of the pyramid does not touch the sphere while the half of an Octahedron does. So, should we build the the pyramid as an Half of an Octahedron or as a very small scale of the Great Pyramid?

[Flying Pyramid]

Your image is Correct!
The angle based pi(3.14) should be 22.5 degrees.
The giza pyramid is shaped as it is for several reasons.
The tip of the pyramid is 22.5 degrees.
Thats the angle that counts.

Below is a quick sketch that someone did for me.

[stargate22]

"The exacts are for you to figure out".....Gezzzz!:nono:


...well, there's yer answer.

[Cyaneyed]

Interesting thread.

Is this (http://cgi.ebay.co.uk/MAGNETITE-in-MATRIX-naturally-magnetic-4_W0QQitemZ380157053806QQcmdZViewItemQQptZUK_Colle ctables_RocksFossils_Minerals_EH?hash=item5883204b 6e) the kind of magnetite you're talking about? If so, it's clearly available cheap in small chunks-enough for an effort at making an example.

Are there any practical ways of shaping magnetite personally? Also, having seen the example of the 'notched' spheres you posted, how important is it to maintain the integrity of a perfect sphere 'underneath' the notches as it were? I imagine that part would be a little tricky without machinery.

As this thread is now over a year old-how are those schematics and videos coming? ;)

[Flying Pyramid]

Interesting thread.

Is this (http://cgi.ebay.co.uk/MAGNETITE-in-MATRIX-naturally-magnetic-4_W0QQitemZ380157053806QQcmdZViewItemQQptZUK_Colle ctables_RocksFossils_Minerals_EH?hash=item5883204b 6e) the kind of magnetite you're talking about? If so, it's clearly available cheap in small chunks-enough for an effort at making an example.

Are there any practical ways of shaping magnetite personally? Also, having seen the example of the 'notched' spheres you posted, how important is it to maintain the integrity of a perfect sphere 'underneath' the notches as it were? I imagine that part would be a little tricky without machinery.

As this thread is now over a year old-how are those schematics and videos coming? ;)


Yes the same type that is in the 2nd page of this thread.
The naturally magnetic kind that forms a octagon shape.
The octagon is not magnetic until it is cut at its center createing two pyramids, then it becomes suer magnetic.
Yes they would be done with machinery or manifested, whichever is easier. ;)
The sphere shape inside is very important due to the flow of ions at high revolution.
The thread is over a year old because shortly after i started this thread the forum went to a "pay to post" type of subscription which i did not agree with so i could no longer post here.
But Bill & Kerry have since revoked that and the forum is now free again.
So i have began to work here again.
The schematics & videos are coming, all in due time.
My idea has already been put to the test by lots of people all over the world.
I waiting to see what results they come up with.

[Cyaneyed]

I understand why you can't and wouldn't want to demonstrate this yourself, but would it be possible for you to make production instructions (and also where to buy pure magnetite in the correct form)? I'm very interested in trying but I need to know the exact materials and machinery it would take to achieve the right results. It sounds like something you could make, find it doesnt work, and then be told you didn't do 'xyz' correctly (if that makes sense). So a clear overview/outline would be very useful here.

[Carol]

I have just one small question. What happens to the magnet if the poles have a magnetic reversal? Will they still be effective?

[UncleJohn]

I have just one small question. What happens to the magnet if the poles have a magnetic reversal? Will they still be effective?

Hi Carol,

I sure wish I was on the big island now.

As a kid, I would take a 110 volt cord with plug and connect a little tin foil in series with a coil of wire to the non plug end. I would stick a magnet in the coil and plug it in the wall. Depending on the phase of the AC current, the poles of the magnetic would get reversed. The tin foil would act as a faster blowing fuse than the house ones.

So the answer is yes. The magnet is still effective with reversed poles.

[Flying Pyramid]

I have just one small question. What happens to the magnet if the poles have a magnetic reversal? Will they still be effective?

The pyramid magnet is a mono pole.
the spheres have both poles.
So there is no difference as long as the same effect is achieved.
But as i stated the pyramid is a monopole.
The spheres must still remain north to north and south to south. (true north & true south)

[Flying Pyramid]

I understand why you can't and wouldn't want to demonstrate this yourself, but would it be possible for you to make production instructions (and also where to buy pure magnetite in the correct form)? I'm very interested in trying but I need to know the exact materials and machinery it would take to achieve the right results. It sounds like something you could make, find it doesnt work, and then be told you didn't do 'xyz' correctly (if that makes sense). So a clear overview/outline would be very useful here.

The videos & schematics are still being worked on.
The specifics as an exact degree, number, ion flow is still not defined.
Only the basics of the design are realized at the moment.
This is a re-discovered technology that i came across in my research of all things and how energy plays apart of our existence and on what level.
So everyday in one day closer to deciphering the mountain of info that goes with this tech.
I released it so that others already on this path could add it to what they are already doing and teach the true basics of energy and its role in all things.
This base tech will re-teach all of the hidden knowledge to the open world again.
This is my main purpose.

[Dantheman62]

Here you go! Just announced!...


Irish new energy device offers solution for UN climate talks,

An Irish company, Steorn, today began public demonstrations of an ‘over-unity’ device powered by rotating magnets. Developed over a six year period, the Orbo technology provides a new energy source to power electrical devices and cars. It is claimed to produce more energy than it consumes at a ratio of 3:1, which has led to considerable skepticism from the scientific community. In a Press Release, Steorn announced a six week period for public examination and evaluation in Dublin Ireland from December 15 to January 31, 2010. Plans exist to develop the Orbo technology for commercial production and distribution.

If the Orbo technology demonstration is successful, it will revolutionize the energy industry and make it possible for fossil fuel production to end within a decade or two. 193 national leaders are currently seeking ways to reduce greenhouse gas emissions during the UN Climate conference in Copenhagen, Denmark. The Orbo technology, if viable, offers an easy affordable solution to increased global energy demand while significantly reducing global greenhouse gas emmissions.

In its Press Release Steorn announced:

Orbo technology, which has been in development for six years, provides free, clean and constant energy at the point of use. It can be engineered to power anything from a phone to a fridge to a car. It is controversial because it is an "over-unity" technology, meaning that it produces more energy than it consumes without the degradation of its constituent parts. This is an apparent violation of the Law of Conservation of Energy, which states that energy can neither be created nor destroyed. The implications, not just for energy production but for society as a whole, are profound.

The public demonstrations are being streamed live at www.steorn.com/orbo. According to Sean McCarthy, Steorn CEO, "At the end of the six week demonstration period, developers will be able to access our technology and start the process of developing Orbo technology-powered products."

For more info and the rest of the article...
http://www.examiner.com/x-2383-Honolulu-Exopolitics-Examiner~y2009m12d15-Irish-new-energy-device-offers-solution-for-UN-climate-talks

[Flying Pyramid]

Here you go! Just announced!...


Irish new energy device offers solution for UN climate talks,

An Irish company, Steorn, today began public demonstrations of an ‘over-unity’ device powered by rotating magnets. Developed over a six year period, the Orbo technology provides a new energy source to power electrical devices and cars. It is claimed to produce more energy than it consumes at a ratio of 3:1, which has led to considerable skepticism from the scientific community. In a Press Release, Steorn announced a six week period for public examination and evaluation in Dublin Ireland from December 15 to January 31, 2010. Plans exist to develop the Orbo technology for commercial production and distribution.

If the Orbo technology demonstration is successful, it will revolutionize the energy industry and make it possible for fossil fuel production to end within a decade or two. 193 national leaders are currently seeking ways to reduce greenhouse gas emissions during the UN Climate conference in Copenhagen, Denmark. The Orbo technology, if viable, offers an easy affordable solution to increased global energy demand while significantly reducing global greenhouse gas emmissions.

In its Press Release Steorn announced:

Orbo technology, which has been in development for six years, provides free, clean and constant energy at the point of use. It can be engineered to power anything from a phone to a fridge to a car. It is controversial because it is an "over-unity" technology, meaning that it produces more energy than it consumes without the degradation of its constituent parts. This is an apparent violation of the Law of Conservation of Energy, which states that energy can neither be created nor destroyed. The implications, not just for energy production but for society as a whole, are profound.

The public demonstrations are being streamed live at www.steorn.com/orbo. According to Sean McCarthy, Steorn CEO, "At the end of the six week demonstration period, developers will be able to access our technology and start the process of developing Orbo technology-powered products."

For more info and the rest of the article...
http://www.examiner.com/x-2383-Honolulu-Exopolitics-Examiner~y2009m12d15-Irish-new-energy-device-offers-solution-for-UN-climate-talks

Yes i know.
But that has absolutly nothing to do with this thread.
There is already a huge thread for that very topic.
The device they are displying is not a "free energy" device.
Their device takes energy and oil/gas to operate.
They are doing the same thing tons of other techs are doing in the same way all over the planet.
That tech is not anything new, just an amped version of the same design.

My design is the ONLY trully "Free DC Energy" device in exsitance.
It uses perpetuall motion to operate.
It does not need energy or anything else to start or maintain.
My design and tech is what those types of scientists will incorperate into thier tech and designs.
My purpose is to enlighten those peopole on how energy works, and is harnessed.
Eventually it will train the mind to design, built, and create without "schoolastic" bounderies.

[Dantheman62]

hmmm, alrighty then, just disregard it! Didn't mean to step on anyone's toes! LOL
Nevermind! moving right along........

[Flying Pyramid]

Im sorry, i reread that and it sounds cranky. :thumbdown:
I havent had enough :cup: yet. lol
All tech that utilizes truth and hope is a step in the right direction.
From my point of view , it my head, its like there not moving fast enough.
I want to kickstart everything and set us back to where we should be with our understanding.
But being impatient and cranky is not trying to understand.
We all need rare enlightenment. My hand raised the highest.

[Sollve]

Hi Flying Pyramid,

Wow, this was a very interesting read. To bad there was that pause for a year. It really seemed to start to take off a year back.

What is the latest data on this?

Has anyone tried to make anything yet?

Just wanted to be updated on the progress about what has been done and not.

Cheers,
Sollve

[Sollve]

Flying Pyramid,

It just came to me that I need to ask you what you think about solid state over unity devices? Like the one from Sweet Floyd for example. That seems to be the most sophisticated way to tap energy instead of those complicated moving things.

Just wanted your opinion on this.

Sollve

[Waking.Up]

My personal opinion is that this Flying Pyramid guy is full of ****. I hope I'm wrong.

Cheers

[Sollve]

My personal opinion is that this Flying Pyramid guy is full of ****. I hope I'm wrong.

Cheers

Waking.up,

I hope you are wrong aswell! Why do you think this? Are there any solid proof that what he says is wrong?

Just curious!

Cheers,
Sollve

[Waking.Up]

Waking.up,

I hope you are wrong aswell! Why do you think this? Are there any solid proof that what he says is wrong?

Just curious!

Cheers,
Sollve

Just read the thread. Flying pyramid is saying that you need a unipole magnet to run this only true free energy design. Well, doooh, if there were in existance unipole magnets, perpetual motion devices would be fairly easy to build. Hence, his design is not the only one that is the true design, because in the world of unipole magnets, you could design number of devices, and all would work on the same principle. The problem is with the unipole magnet.. Not some notches on the spheres or the size and design of the pyramid. He's got you running in circles.
If indeed I am wrong, I will admit it with all my heart when F_P comes forth with the first in the world unipole magnet shaped like whatever.

[shaundelear]

[QUOTE=Waking.Up;231007]Just read the thread. Flying pyramid is saying that you need a unipole magnet to run this only true free energy design. Well, doooh, if there were in existance unipole magnets, perpetual motion devices would be fairly easy to build. Hence, his design is not the only one that is the true design, because in the world of unipole magnets, you could design number of devices, and all would work on the same principle. The problem is with the unipole magnet.. Not some notches on the spheres or the size and design of the pyramid.

What is a unipole magnet?

Unipole Or Unidirectional Magnets are strongly recommended for therapeutic usage. These magnets are a flat surface type with the Positive pole on one flat side, and the Negative pole on the opposite flat surface. The Positive side is usually marked with a red color. The Negative is usually indicated by a GREEN colored-coded sticker. The green NEGATIVE side is always the side placed toward the body.

[Olam]

Magnets always have 2 poles. What is refered to a unipole magnet is simply one that has a very strong pole and a very weak one. So its like the stronger pole cancels out any effect of the weaker pole.
Calling it a unipole is misleading as it still has 2 poles.

That being said, I have followed this thread since the begining. I am still baffled at why FP would "play" for so long.
We don't have the leisure to play anymore. If this thing is real, now is the time to get it out, if not, then lets move on.
Sofar, I have lost maybe the equivilent of 5 hours on this, I will never get them back and it will be very frustrating if thing is bogus!
So FP, one cannot say we are being impatient and rude to you, it has been one friggin year now!
Either put up or move on.

[Waking.Up]

Magnets always have 2 poles. What is refered to a unipole magnet is simply one that has a very strong pole and a very weak one. So its like the stronger pole cancels out any effect of the weaker pole.
Calling it a unipole is misleading as it still has 2 poles.


Is it possible for a one solid whole object that in fact is a magnet to have one pole that is weaker than the other? e.g. If you have, I dunno, a cube that is a permanent neodymium magnet - how is it possible to reduce one poles strenght?

[Olam]

I recommend a great book if you want to know more about the power of magnets, including healing and magnetizing water. It was originally written in Dutch but has been translated in several languages.
Its called "Genezen met Magneten" by Uitgeverij, publisher is Deventer Holland.
Here is is at Amazon, french version:
http://images.google.ca/imgres?imgurl=http://ecx.images-amazon.com/images/I/5183EJ5ZF4L._SL500_AA240_.jpg&imgrefurl=http://www.amazon.fr/Magn%25C3%25A9toth%25C3%25A9rapie-aimants-gu%25C3%25A9rissent-Kumar-Mehta/dp/2890742296&usg=__Fxer1kZ63ia50NoJ5xtzEirNYMc=&h=240&w=240&sz=13&hl=en&start=1&um=1&tbnid=0ei2MurJWYLVkM:&tbnh=110&tbnw=110&prev=/images%3Fq%3DMagnetotherapie%2Bles%2Baimants%2Bqui %2Bguerissent%2Benglish%26hl%3Den%26client%3Dfiref ox-a%26rls%3Dorg.mozilla:en-US:official%26hs%3DhsY%26sa%3DG%26um%3D1

So as for your question, the shape of a magnet plays on the intensity of the poles. A thicker magnet will have stronger poles. The magnetic effect is always omnidirectional but the intensity is always stronger at the tip of the magnet. As for a magnetized "ball", it would be interesting to see how it reacts. For sure, all magnets are self adjusting, so to change the behaviour of one, I guess you have to play with the shape and see how it reacts. A cube in my opinion, would have 2 stronger poles and the 2 other sides on the same plane would be weaker. Again, it self adjusts. I have never seen a magnet with more than 2 strong poles.
Cheers

[john kennedy]

this to me is simply a upside down version of George greens magnetic motor

http://www.youtube.com/watch?v=hkgyY47duCM

or am I missing something?

Upside down the magnet sits on the magnetic field and spins,
rather than rotating below on the worktop
The principle is the same - just different method of acheiving same outcome.
Credit to Flying Pyramid for alternate construction.
Credit to George Green!
No disrespect to anyone.

Have a great Day!

[Gnosis5]

Re magnets, what if the Earth experiences some major shifts? Could any one of those shifts adversely effect working magnets?

[Roman195]

this to me is simply a upside down version of George greens magnetic motor

http://www.youtube.com/watch?v=hkgyY47duCM

or am I missing something?

Upside down the magnet sits on the magnetic field and spins,
rather than rotating below on the worktop
The principle is the same - just different method of acheiving same outcome.
Credit to Flying Pyramid for alternate construction.
Credit to George Green!
No disrespect to anyone.

Have a great Day!


If you know the history of George's magnetic motor. He supposedly got it from a picture of a Pleijaran ship photo that Billy Meier's showed him. George's device uses fixed ball magnets to spin a unfixed speaker magnet. I have played around with this thought in my head for a while and like it because of it's simplicity to build. Due to this life's paradigm and how it affects my paradigm haven't had much choice but to leave it in my head for now. I like, Rick Simpson (of Run from the cure fame) have the same attitude in how we both don't want any monetary gain. He gives it away! And only accepts donations to keep his cause going. I to believe that the future will bring this thought into manifestation or we go back to the stone age like the PTB want. Ours needs would be free! Because you would have guys like Rick and myself doing this work for free cause we don't need the money to survive or feed our ego. With that written here's some thoughts that I've come up with using George's principle. Suppose you take the ball magnets and put them in a tube that will hold the magnets in, yet allow them to rotate and make the speaker magnet fixed. Will the ball magnets start to spin? Now add a Tesla coil ( I choose the tesla coil because of it's simplicity to build) around the rotating ball magnets. Will the tesla coil put out a voltage? Or you can keep the ball magnets stationary and put the tesla coil arounfd the spinning core? Which is the way I would try for free energy because I THINK the balls rotating would create anti gravitical flight?

In Peace and Unity,
Roman:cup:

PS: If I misspelled a name I appologize for I'm not good at names or spelling. Thank Creation for word processors! After all we are only HUMAN.

[Roman195]

What are the pyramids?
Well that is a complicated question as they are multi-purpose.
But i will answer a few basics.
1.) They are a blueprint of where our planet upwells energy from.
2.) They show us how to harness that natural energy.
3.) They are/were jump-gates.
4.) They are machines for self ascension (for those who chose not to wait and do it naturally)

The above is a section of Flying Pyrimads original post.

I would like to call your attention to item 4 of this original post. There is another Ascension device that was built on the so called God’s Meridian and it’s the White House. Thanks to William Henry’s research I post this article on the device:
http://www.williamhenry.net/art_temple.html
In Peace and Unity,
Roman

[Sollve]

Just read the thread. Flying pyramid is saying that you need a unipole magnet to run this only true free energy design. Well, doooh, if there were in existance unipole magnets, perpetual motion devices would be fairly easy to build. Hence, his design is not the only one that is the true design, because in the world of unipole magnets, you could design number of devices, and all would work on the same principle. The problem is with the unipole magnet.. Not some notches on the spheres or the size and design of the pyramid. He's got you running in circles.
If indeed I am wrong, I will admit it with all my heart when F_P comes forth with the first in the world unipole magnet shaped like whatever.

When talking about monopoles/unipoles (same thing?) I came to think about the following videos I've have come across in the past. I don't know if these videos are related to actual monopoles/unipoles, but they are still interesting.

Marko Rodin Permanent Monopole Magent (biased Poles)
http://www.youtube.com/watch?v=RnjW1zROJPc

The Jeff Cook Effect
http://www.youtube.com/watch?v=IMm70qQ5Jms

Jeff Cook Effect - Wizard Wand
http://www.youtube.com/watch?v=ZNEGBelLZNY


Love, peace and understanding together with free energy for ALL, would make my day! :banana:

Sollve

[Bilko]

just a quick one.
The bloke in that video about Giants describes an artifact. A cup that sounds very much like a unipole magnet.
Here, Klaus Dona
http://projectcamelot.org/klaus_dona.html