|
02-18-2010, 10:07 PM | #11 | |
Avalon Senior Member
Join Date: Feb 2010
Location: Bellingham, Washington, USA
Posts: 38
|
Re: Great Pyramid - Working model of subterranean section
Quote:
Technically, the clapper isn't tuned. (The clapper makes an impact sound, but the compression wave is a separate and more powerful shock wave) (Just a FYI to be completely correct) But the back pressure is tuned. By restricting the output and increasing the pressure at the "output" line (dead end shaft), the rate and frequency can be tuned quite significantly. The higher the pressure, the higher the rate and the higher the frequency. I don't think the rate is that critical, but I think they tuned the frequency (actually wave length) and the amplitude. That's why they built the output line - for simple tuning. I think there are several viable possibilities for the machine. Now that I'm actually writing to people that can converse I can share some possibilities. 1. Interstellar transmitter/beacon - simple solution that doesn't stretch the imagination much 2. Hyperdimensional transmitter (Joe Parr's work) Some sort of opening of worm hole or stargate This is what I "feel" it is. Since I don't know any sort of physics in this area, there's no way for me to suggest a proof. Maybe each "true" pyramid was a location of a specific worm hole for different destinations. (There were about 300) The sub chamber is just the motor for the machine. I had read that there was some electrical differential between core masonry and the casing stones. Also, the sub chamber vortex will have a voltage differential between core and outer layers of rotation (very interesting when considering dissolved lime in the water and it's potentials) Best, John Last edited by John_Cadman; 02-18-2010 at 10:11 PM. |
|
|
|