WhiteLove
16th September 2015, 20:18
I discovered a very interesting concept explained by Bashar in the video below (also hints at how free energy is achieved):
oRCn7GVSjIk
http://www.rpi.edu/dept/phys/ScIT/InformationTransfer/reflrefr/rr_glossary/images/Apex.gif
Please note that the apex angle (see above) of the two cones needs to be 33 degrees.
Furthermore the two cones in a standing position must be big enough to stand within an imaginary 3 sided pyramid that is at least 3 feet tall.
(Source) (http://projectavalon.net/forum4/showthread.php?84884-Rare-channeling-session-from-Egypt-on-Nov-30-1992-contains-blue-prints-of-a-free-energy-device)
So what Bashar claims here is that you can build a so called "space-time antenna" that you can use to freely tap various kinds of energy (incl. electrical energy) from the energy in the space-time continuum. As long as it is well insulated, has copper wire in a closed loop and meets the above design criteria, it should work.
Here is an example of how it should look, except I think it needs to be more well isolated, be bigger and match the design criteria more closely. You also need to wire its output, so that you can tap amplified electrical charge from it. The structure acts as an antenna, a receiver that receives a certain amount of the "free energy" automatically, the bigger it is and the better the winding is, the more energy it can receive freely. It is ignited by adding a little amount of electrical charge to it, which then automatically starts to amplify as that kind of energy from the space-time continuum starts to resonate with it. Once the energy is received inside of the antenna, it can be tapped of energy that can take a certain form such as with this particular design electrical energy. Hence this is an infinite free energy source.
I would maybe try to input electrical charge at the apex of one of the cones, and output electrical charge at the apex of the other cone. One should then be able to notice an increase in output over time, in other words notice that more electrical charge exits the antenna than what goes into it. If you then take a certain amount of that excessive output and route it back into the cone, then at some point you should be able to disconnect the original input source and make it run in stand-alone mode. It is at that point that you have demonstrated free energy - you do not add any energy into it from any explicit foreign energy source, but you still get energy out of it - forever...!
https://basharspacetimeantenna.files.wordpress.com/2011/03/rendered-sta.jpg
Has anybody here tried this and tuned it precisely to the above configuration?!
oRCn7GVSjIk
http://www.rpi.edu/dept/phys/ScIT/InformationTransfer/reflrefr/rr_glossary/images/Apex.gif
Please note that the apex angle (see above) of the two cones needs to be 33 degrees.
Furthermore the two cones in a standing position must be big enough to stand within an imaginary 3 sided pyramid that is at least 3 feet tall.
(Source) (http://projectavalon.net/forum4/showthread.php?84884-Rare-channeling-session-from-Egypt-on-Nov-30-1992-contains-blue-prints-of-a-free-energy-device)
So what Bashar claims here is that you can build a so called "space-time antenna" that you can use to freely tap various kinds of energy (incl. electrical energy) from the energy in the space-time continuum. As long as it is well insulated, has copper wire in a closed loop and meets the above design criteria, it should work.
Here is an example of how it should look, except I think it needs to be more well isolated, be bigger and match the design criteria more closely. You also need to wire its output, so that you can tap amplified electrical charge from it. The structure acts as an antenna, a receiver that receives a certain amount of the "free energy" automatically, the bigger it is and the better the winding is, the more energy it can receive freely. It is ignited by adding a little amount of electrical charge to it, which then automatically starts to amplify as that kind of energy from the space-time continuum starts to resonate with it. Once the energy is received inside of the antenna, it can be tapped of energy that can take a certain form such as with this particular design electrical energy. Hence this is an infinite free energy source.
I would maybe try to input electrical charge at the apex of one of the cones, and output electrical charge at the apex of the other cone. One should then be able to notice an increase in output over time, in other words notice that more electrical charge exits the antenna than what goes into it. If you then take a certain amount of that excessive output and route it back into the cone, then at some point you should be able to disconnect the original input source and make it run in stand-alone mode. It is at that point that you have demonstrated free energy - you do not add any energy into it from any explicit foreign energy source, but you still get energy out of it - forever...!
https://basharspacetimeantenna.files.wordpress.com/2011/03/rendered-sta.jpg
Has anybody here tried this and tuned it precisely to the above configuration?!