Quantum Energy Generator (QEG) Taiwan Has Resonance! (April 4, 2014)

[aviators]

Posted by tnkayaker (here)
good luck guys,awsome news! i live in east tenessee and i would like to find anyone in this area of the country that may be getting a group together to build these units, i have many years of fabrication of all kinds, from metal to epoxies and wood/plastic, so please get in touch with me so i might consider relocating to join a group if possible, thanks dennis.

Dennis check out this forum.You might find a group in your area.
http://be-do.com/index.php/en/forum

Now 530 members and growing by the day. Hope we see some results soon with all the people working on this.

Cheers.....

[Atlas]

As Hope and Valerie, Hope’s Mother and fellow Contributor of FTW Organization, pointed out during their Orientation, the normal process for developing a Product is to keep it need to know and top secret for the entire process until the product is ready for distribution.

Resultantly, when the QEG Plans were Open Sourced in March, there was some confusion that it was completely tested and ready for mass production. [...]



Within that context, it is clear that there is much in the way of perfecting, which is in the process of emerging. Jamie, the main developer behind the QEG, shared with us during the Orientation that the team in Taiwan had several issues because the QEG’s natural tendency is to produce high voltage at low amperage. As a result, they tried to increase the output to conform to the standard power levels used in modern society and blew out the first core. The insulation of the core was identified as the issue and they rewound the second core with more insulation to compensate. However this created a new problem, the diameter of the primary and secondary coils now was extended such that when the QEG powered up, arcs jumped to the core frame and prevented the QEG from becoming resonant.

The QEG will produce the Resonance desired, as we have been able to demonstrate in the past, but now is the challenge of making it workable for mass distribution, and discovering what the final product will look like. [...]

The QEG works off the principles of an Open Energy System, which is inclusive and holistic; perfectly embodying the Divine Feminine Principle. If we try and rush adhoc solutions with out having key knowledge and understanding, we will create obstacles for manifesting her into reality. But if we use the Divine Feminine Principle of a Holistic Inclusive perspective we can receive new data openly and without bias and harmonize it into the design to enhance it over all. This Feminine Birthing aspect and the intention of giving her to the world for the good of all is the foundation of our work here in Morocco.

- Justin Deschamps


Justin (Left) Julian (Right)

http://sitsshow.blogspot.nl/2014/04/...ild-day-1.html

[Nick Matkin]

An important question which I have not yet seen answered: at what frequency does 'resonance' occur with the QEG?

Is this L/C resonance, or some magneto-strictive/mechanical resonance?

[Eligos]

Update, this just in:

"Well, good evening from Aouchtam, Morocco. This evening The QEG here was switched on, and achieved resonance!!!
There are going to be a few tweaks, such as a better drive belt, but it is up and running!!
HOLY CRAP did it ever sound beautiful when it locked into its resonance!!!"

[aviators]

Posted by Eligos (here)
Update, this just in:

"Well, good evening from Aouchtam, Morocco. This evening The QEG here was switched on, and achieved resonance!!!
There are going to be a few tweaks, such as a better drive belt, but it is up and running!!
HOLY CRAP did it ever sound beautiful when it locked into its resonance!!!"

Source: https://youtube.com/watch?v=BgNh1xyg_8w

[aviators]

Morocco has resonance (Longer version video) Celebration.
Let the testing begin. Results should come shortly.

Source: https://youtube.com/watch?v=_7--G5qSDag

[Arak]

What does this "has resonance" mean? Produces energy more than consumes?

[aviators]

Posted by Arak (here)
What does this "has resonance" mean? Produces energy more than consumes?

From Wiki; "In physics, resonance is the tendency of a system to oscillate with greater amplitude at some frequencies than at others. Frequencies at which the response amplitude is a relative maximum are known as the system's resonant frequencies, or resonance frequencies. At these frequencies, even small periodic driving forces can produce large amplitude oscillations, because the system stores vibrational energy."


The way I understand it, the QEG needs to be tuned to the resonant frequency to
Deliver maximum power.
In the video when the QEG reaches the resonance speed the bulbs light brightly.

Now that we have a running QEG the team should be able to measure power
levels and determining how much over unity they have.

[Nick Matkin]

Posted by Arak (here)
What does this "has resonance" mean? Produces energy more than consumes?

No, unfortunately not.

Resonance is the natural period of a pendulum swing. Resonance is the period of the orbits of the moon and planets. Resonance is the note of a wine glass when a finger is rubbed over it. Organ pipes, musical instrument stings, in fact all acoustic musical instruments produce resonance determined by some some dimension or other. Radio signals depend upon resonance in numerous ways.

Resonance is all around us. It's nothing mysterious; it's just when ANY sort of oscillation is reached that requires the minimum energy to keep it going.

Usually measured in cycles per second (Hz), but cycles during any period.

And QEG resonance? Who knows what that means. They don't appear to be very forthcoming with explanations...

Maybe they'll explain it if their device works and a TV documentary is made describing their ground-breaking science.

BTW, has anyone made one yet from their published plans?

Nick

[gnostic9]

Posted by Nick Matkin (here)

Posted by Arak (here)
What does this "has resonance" mean? Produces energy more than consumes?

No, unfortunately not.

Resonance is the natural period of a pendulum swing. Resonance is the period of the orbits of the moon and planets. Resonance is the note of a wine glass when a finger is rubbed over it. Organ pipes, musical instrument stings, in fact all acoustic musical instruments produce resonance determined by some some dimension or other. Radio signals depend upon resonance in numerous ways.

Resonance is all around us. It's nothing mysterious; it's just when ANY sort of oscillation is reached that requires the minimum energy to keep it going.

Usually measured in cycles per second (Hz), but cycles during any period.

And QEG resonance? Who knows what that means. They don't appear to be very forthcoming with explanations...

Maybe they'll explain it if their device works and a TV documentary is made describing their ground-breaking science.

BTW, has anyone made one yet from their published plans?

Nick

hi Nick,,,,, I'll believe it when i personally see it! sorry, i'm a bit of a doubting Thomas! but we live in hope, as they say!

[chancy]

Hello Everyone: I know everyone is anticipating success but when success does not come we are left with the facts:

This was just posted on www.overunity.com today. Unfortunately it's the only results that have been posted as of late.


"Offline hartiberlin

Administrator
Hero Member
*****
Posts: 7384
free energy research OverUnity.com

Re: Quantum Energy Generator (QEG) Open Sourced (by HopeGirl)
« Reply #665 on: Today at 04:22:30 PM »
Sorry, to burst all your hopes,
but I just heard yeasterday regarding the QEG measurements in Morroco , that Gerhard Roessler, a German electrical engineer has just measured :

500 Watts input power from the drive motor and only 120 Watts maximal output power at the lamps...

so no overunity and no selfrunning...

it seems the claimed "raw power" of Mr. Robitaille was either measurement errors or a
lie to make lots of money with donations...too bad...

Regards, Stefan."

You can check it out yourself at :
link:
http://www.overunity.com/14443/quant...msg401033/#new

chancy

[Eligos]

Folks, this is it (drum roll) we have OVERUNITY!!!
http://youtu.be/oJkNruMM6tE

[Eligos]

Over-Unity and the QEG 18 May 2014 18:27 #1644
Shean

OFFLINE
Posts: 117
Thank you received: 216
Karma: 22
By Dave Starbuck Sunday, May 18, 2014
Source: www.allegedlydave.com/blog.htm?article_id=5

I, like millions of other people around the world, read the announcement of the open sourcing of a free energy device back in march with a little skepticism, (I’ve been banging on for quite some time that inventors should just ’put it out there’ rather than try and make themselves rich with their invention, and yet here it and I was still skeptical... go figure) but I have been following its progress with mounting excitement, wishing that I could be a part of this historic venture and no sooner than I got back to base I was. A package of test equipment needed to be taken over to Morocco and it was thought that the courier needed to be someone who could provide a little assistance to Jamie Robitaille the developer of the Quantum Energy Generator (QEG) and next thing I knew I was a plane to Morocco

I arrived in Tangiers, expecting to be met at the airport by a Moroccan friend of Youssef, the QEG team’s "Fixer", I couldnt say that I was looking forward to a two hour trip with a man that I had no hope of communicating with, although, being met in Tangiers airport by a Moroccan driver holding a sign that read "Mr. Starbuck" would have been cool.

I had skillfully negotiated the surly looking gendarmes and their associates that looked for all intents and purposes like secret police, (not so skillfully, in hindsight, now that I know that I apparently look like a Moroccan) but now, with the exit gate a mere arms length away, I was halted by a border guard who seemed mildly interested to find out what was in the large instrument case I dragged behind me, filled with oscilloscopes, multimeters, high voltage probes and various other terrorist paraphernalia that would have whipped up American TSA agents into a frenzy and sent them scrambling for their tasers, rubber gloves and KY Jelly. Thankfully, I had been briefed on how to handle this situation, I was given the cover story that it was equipment for use in a humanitarian project to build a water pump to bring water to the impoverished village of Aoucham, and I felt confident that I could deliver a convincingly casual performance that would not arouse suspicion. The guard seemed so laid back that I probably could have said "Don’t worry mate, it’s just meters and ****" and he would have rolled his eyes and waved me through, but unfortunately the border guard began asking me questions in French and it was only then that I realised that my near fluent command of the French language, that I had enjoyed two decades earlier, had degenerated to the point where I could barely describe a monkey sitting in a tree (le singe est dans l’arbre... yeah baby I still got it )

I managed to explain through a combination of hand gestures and broken, schoolboy french that the case was sealed with metal tags that would require cutting off and that I had no hope of explaining what was in it and now the guard was starting to get agitated, his hand kept straying toward his radio and I began to wonder what life in a Moroccan prison would be like, but then I was saved, Jamie Robitalle himself and an american woman called Whitney (who spoke perfect French) had come to meet me at the airport, and even though, disappointingly, they were not carrying a "Mr. Starbuck" sign, they were able to have us quickly on our way.

Jamie is a humble, unassuming man with a seemingly perpetual smile and the gentle demeanour of a beloved maths teacher, and the three of us were engaged in easy conversation that evaporated our two hour journey to QEG headquarters, it was at this point that I learned that while the QEG had achieved resonance, it had not yet achieved over-unity, that is, it was still consuming more power than it generated. Even though my role was little more than a courier, I offered my services as Jamie’s assistant and silently stated my intention to see over-unity before I went home.

I arrived at "The Sanctuary" at 4:00am and a few hours later I was up and being introduced to the members of the community as an honoured guest, and since it was a Sunday there was not much work that would be done and so I found myself slipping into the easy flow of the community as I participated in their activities as if I’d always been a part of them.

The following day Jamie explained how he had approached Timothy Thrapp from the WITTS "Christian" Ministry who, despite their altruistic claims of releasing free energy to the world, demanded $400 for one hour of his time. Jamie was able to get a basic understanding of this replication of Tesla’s work, but it was clear that he was leaving out a lot of information and being intentionally vague about what he did share, and when Jamie compared notes with someone else, who had paid handsomely for the privilege, there were several contidictions. It also became obvious that the intent was to seduce customers into repeated "donations" to the Ministry. Moreover, when Thrapp learned of Jamie’s intent to open source the technology, relations between them became frosty.


Then I had my first live demo of the QEG, it was loud like an power router, and as it achieved reonance there was a harsh sounding rattle and it did indeed perform distinctly under unity, Jamie showed me his meticulous records of trials of varying rotor speeds and capacitance values and explained his hitherto failure to find a "sweet spot" combination.

The QEG was, at this point, working at unity, that is, it was producing the same amount of power as it was consuming, which in itself is an astounding achievement since the generators that supply our power now consume something in the region of 18 watts in order to generate 10 watts.

Later, Jamie began a new series of experiments with much larger arrays of capacitors and testing the location of a grounding wire. My assistance largely took the form of getting in the way and asking far too many questions.

On my third day working with the QEG, I was privileged to sit in on a Skype call between Jamie and a German team who are also developing a QEG, some data was exchanged and an accord was reached to have closer ties and regular catch up meetings.

By the fifth day Jamie’s dogged persistence had paid off, he ran a new sequence where the QEG would initially power the load of six 100 watt light bulbs, he would the add a solar array inverter (high voltage input) to the load and once it initialised he would disconnect the bulbs and the QEG would be running the inverter, unfortunately the badly regulated Moroccan mains power would alter the QEG output and send the inverter into a diagnostic mode, and on the rare occasion that we successfully ran the inverter we soon discovered that the new Earth configuration caused a ground fault condition and would trip the main breaker.
Eventually this new configuration was tried sucessfully with all the new test equipment I’d brought hooked up, oscilloscopes were oscillating, meters were metering and high voltage probes were probing, the input power meter was showing that the QEG was drawing 600 Watts, the output voltage was holding steady at 380 volts and the output current was peaking at just under 2.4 amps... Jamie began muttering about adjusting the values of the capacitor array, but then my maths skills, that are as sharp as wet spaghetti, kicked in it was outputting just under 900 watts.... in other words...OVER-UNITY!
Not an awful lot over but over-unity nonetheless; Jamie smiled and almost reluctantly agreed. I suggested that since the inverter was now capable of running the drive motor we should aim at having the QEG running in self powered mode, Jamie however, was far more cautious, but he wired up the changeover switch nonetheless.

On day six, Jamie had been in communication with a QEG team in Canada who had some interesting ideas regarding treating the primary winding as the secondary and drawing power from that winding instead, we studied the new schematics but they didn’t seem to make a lot of sense, but then we mused about the tecniques and methodology one might employ to hide a simple solution, stretching it out so that customers would keep coming back for more, but without making it seem like the customer was being tricked and bled dry and we agreed that switching the primary and secondary might well fit the bill, so Jamie set about rewiring the QEG.

Day seven, my last day. Jamie had been up late the previous night talking to the Canadian team and he wasn’t around by lunchtime, so I went to Oued Lou, the nearest town with a group from the community, but by the time I arrived back Jamie had already finished rewiring the QEG and was already reporting a significant voltage in the primary in the 1-1.5kv range, and was busy adding a bank of capacitors to the primary winding as per the Canadian design, we didnt have a variable resistor to place in series with the capacitor bank as the design specified but Jamie tried it anyway. The difference was immediately noticeable, the QEG began to resonate at a much lower RPM around 1625rpm, the loud jarring rattle that had characterised the QEG at resonance had been replaced by a gentle purring as it ran far more smoothly and easily than ever before.

The QEG was drawing 500 watts, the secondary was still powering its 600 watt load of light bulbs and yet on the primary side we were reading nearly 2000 volts at 1 amp. If I had gone by Jamie’s furrowed expression alone I might have missed the fact that he had just achieved serious over-unity 500 Watts in and 2000 Watts out... I had to rouse him from his deep contemplation of how to reach his target of 10Kw to remind him to celebrate the fact that he had actually achieved 2.6Kw... I managed to get a high five out of him before he resumed his tinkering.

The QEG achieves Over-Unity!!

At this point, about 1:30 am, members of the community, sensing that something of importance had occurred began to gather in the workshop, more were awakened to witness the event, a rousing round of applause went up for Jamie and we all tucked into Over-unity cake, baked specially for that moment.

So the next step will be to make the QEG self running from the secondary windings stepping down the voltage using a transformer from a high power microwave oven.

Breaking News: Hot off the press!!!I just spoke to Jamie and he mentioned that he has now achieved 3kW output, that’s six times over unity!

[aviators]

Source: https://youtube.com/watch?v=vwgkCweVpt0

We need to have more confirmation on this. I know James is determined and we are all waiting
For the good news. Other teams should be chiming in with similar results.

I am not playing the devils avocet here.
Just looking for clear results that can be confirmed.

below is one persons view on the above video
1900 volts peak-to-peak, divided by two equals 950 volts.
950 volts times 0.7071 gives you 671.7 volts RMS
0.95 amps divided by two gives you 0.475 amps.
0.475 amps times 0.7071 gives you 0.3359 amps RMS.
671.7 Volts RMS x 0.3359 Amps RMS = 226 watts
The electric motor is drawing 655 watts of power.
Therefore the efficiency of the QEG is 226/655 x 100 = 34.5%.

[Nick Matkin]

Interesting.

Power input was 655 watts, shown on the meter and voiced in video. (These power meters read RMS.)

Load was six incandescent bulbs. Let's be generous and assume they are 100 watts each. (Their power rating should have been stated, but was not.) That's a resistive load of 600 watts being fed by 655 watts. That's an efficiency of 92 percent. Looks like they've lost 55 watts somewhere...

If the bulbs are say 150 watt each (and if they were the team would surely have said so) that's a load of 900 watts. Illuminating them with only 650 watts is an efficiency of 138 percent - spectacular if true.

Lets look at their figures:

Voltage output about 1.9 kV peak (they said 'peak' not 'peak to peak') which is 1.34 kV RMS

Output current 1 A peak, or 0.707A RMS

Power output (volts x current) is 1,340 x 0.707 = 947 watts.

Power input 655 watts, power output 947 watts, efficiency is 145 percent!!

If we use their figures, they have achieved over unity. But I suspect the light bulb load test is clear and shows they probably have not done this. I keenly await confirmation from other teams.

Nick

Edited: In my original post (40 minutes before this one) my calculations mistakenly halved the output voltage, thinking they were peak-to-peak, making the efficiency look much worse. The video clearly stated peak, although whoever did the calculations in post 54 made a similar error. On reflection, is the confusion of peak, peak-to-peak and RMS measurements at the route of these claims? If it is it won't be the first time...

[Atlas]

Posted by aviators (here)
below is one persons view on the above video
1900 volts peak-to-peak, divided by two equals 950 volts.
950 volts times 0.7071 gives you 671.7 volts RMS
0.95 amps divided by two gives you 0.475 amps.
0.475 amps times 0.7071 gives you 0.3359 amps RMS.
671.7 Volts RMS x 0.3359 Amps RMS = 226 watts
The electric motor is drawing 655 watts of power.
Therefore the efficiency of the QEG is 226/655 x 100 = 34.5%.

This math were posted by MileHigh here. He also wrote:

Posted by MileHigh
The next logical step from the QEG team is a retraction of the over unity claim made in the recently posted clip and an apology. If they don't do that then it will be the nail in the coffin for them with respect to their character, integrity, and motivation.

[Nick Matkin]

Thanks buares. I looked at your link for the original calculations. It also confirms my assumption that the bulbs are 100 watts each. Total of 600 watts (less actually as they don't all seem to be maximum brightness) so they have lost at least 55 watts - wasted to drive the motor...?

There's a clear discrepancy between the input power shown on the RMS digital meter of 655 watts, and the 600 watts bulbs. If they just put the bulbs across the mains they'd save 55 watts!

On the other hand, the output voltage and current readings are peak values, stated at 1' 50", not peak to peak as in the MileHigh calculations, although MileHigh may have been able to see the ranges on the 'scope or have other info to come to that conclusion.

In any case, the whole demonstration is misleading and unclear. They've been at it for months now and it's time they gave some close-up test equipment readings and videoed some other independent folks checking the measurements, rather than waving a hand-held camera about in the half dark. At the moment they seem to be relying on impressing non-scientific Youtubers who wouldn't know a volt from an amp if it fell out of their ****.

If they want to impress skeptics, they should at least give an unambiguous, clear demonstration. Many skeptics will still shout 'hoax', but some will suspend their disbelief and want to have a close look - I certainly would.

Nick

[aviators]

Can the QEG break the curse ? Still waiting for confirmation from Morocco.
We are getting close I believe.

Below video explains a little more background and history on QEG devices...
Gods Speed......

Source: https://youtube.com/watch?v=PVFMv4A_Rbs

[JoePiscapo]

thats a huge video aviators.. thank you very much.