+ Reply to Thread
Results 1 to 9 of 9

Thread: John Bedini - RIP

  1. Link to Post #1
    Deactivated
    Join Date
    6th December 2010
    Posts
    600
    Thanks
    1,824
    Thanked 2,099 times in 520 posts

    Default John Bedini - RIP

    article from here ...

    JOHN BEDINI Ė YOU WILL BE MISSED!




    For quite a few months, Johnís brother Gary who has always managed the business side of things has been battling health issues and John has been taking care of him. I went out to this shop last week with Jeff Moe, my friend and business associate to pick up some sideband generators, talk about what John wanted to show at the next conference and the usual chit chat about the global state of affairs. When we left, I had no idea that would be the last time I would ever see him again.

    Last night when Peter Lindemann called me two times in a row, I knew it was urgent and was expecting to hear that Johnís brother Gary had passed. That part was true, but what I wasnít prepared for was that 4 hours after Gary, John had died unexpectedly as well.

    Itís always painful to lose a close friend Ė especially when they were so influential in many areas of oneís life. Iím stunned and speechless and donít even know what to say. I will post more details when I learn more. There is a lot I would like to say about John right now, but just canít.

    In the meantime, please send your thoughts and prayers to Johnís wife Ronda and the rest of his family. God bless you John for all that you have done for all of us and your countless contributions to this world to make it a better place. Youíve left more than a legacy my friend Ė Love you lots and already miss you dearly!

    Peter Lindemann posted this and updates will be added as we learn more: http://www.energeticforum.com/renewa...9-end-era.html

    If you want to comment on Facebook, go here: https://www.facebook.com/aaronmuraka...66?pnref=story

  2. The Following 29 Users Say Thank You to Aurelius For This Post:

    AndrejPeĉŽnkin (9th November 2016), Bill Ryan (7th November 2016), Billy (16th December 2016), Bob (7th November 2016), Cara (8th November 2016), Carmody (7th November 2016), cascadian (7th November 2016), ceetee9 (8th November 2016), Debra (7th November 2016), dynamo (7th November 2016), etheric underground (7th November 2016), Fairy Friend (7th November 2016), Flash (8th November 2016), fourty-two (8th November 2016), Foxie Loxie (7th November 2016), Hervť (7th November 2016), i/o (17th December 2016), Jean-Marie (8th November 2016), jjjones (7th November 2016), LoneWolf76 (7th November 2016), Mad Hatter (17th December 2016), PathWalker (7th November 2016), Patrikas (16th November 2016), regnak (7th November 2016), seko (8th November 2016), Sierra (7th November 2016), Snoweagle (13th November 2016), TrumanCash (7th November 2016), Verdilac (7th November 2016)

  3. Link to Post #2
    United States Avalon Retired Member
    Join Date
    2nd July 2013
    Posts
    371
    Thanks
    706
    Thanked 1,737 times in 316 posts

    Default Re: John Bedini - RIP

    http://www.keelynet.com/

    Who killed them?

  4. The Following 14 Users Say Thank You to TODD & NORA For This Post:

    Aurelius (7th November 2016), Bill Ryan (7th November 2016), Bob (7th November 2016), Debra (7th November 2016), fourty-two (8th November 2016), Foxie Loxie (7th November 2016), Jean-Marie (8th November 2016), jjjones (7th November 2016), Mad Hatter (17th December 2016), regnak (7th November 2016), seko (8th November 2016), Sierra (7th November 2016), Snoweagle (13th November 2016), toppy (7th November 2016)

  5. Link to Post #3
    UK Avalon Founder Bill Ryan's Avatar
    Join Date
    7th February 2010
    Location
    Ecuador
    Posts
    21,036
    Thanks
    71,647
    Thanked 265,611 times in 19,520 posts

    Default Re: John Bedini - RIP

    RIP indeed. Thank you. I had not heard that he'd passed.

    I posted this back in 2010:

    ------------

    Last weekend [4 December 2010] I visited my friend Thomas Kirschner, the editor of the German NEXUS magazine.

    To my astonishment, as soon as I arrived he led me down to his basement and showed me a working Bedini machine. He's started to run courses training people how to make them.

    http://nexus-magazin.de/index/nexus-...-in-der-praxis

    This thing really works (though don't ask me how). In the simplest possible terms, it uses a battery to turn a wheel in which fixed magnets rotate past specially designed copper coils. This induces current which then charges a larger battery. You get out more than you put in.

    Thomas's layman's explanation was that each time the field of one of the rotating magnets passes one of the copper coils, it [sort of] "opens a 'gate' into the zero point, grabs a bit of energy, then closes the gate again". (Interestingly, the machine produces more output when it's rotating at medium speed than when it's spinning really fast).

    Avalon member Carmody may be able to explain a little better than I can.

    References:

    The original Bedini websites:
    Two YouTube videos (also embedded below)







  6. The Following 18 Users Say Thank You to Bill Ryan For This Post:

    Aurelius (7th November 2016), Aviator (16th November 2018), Bob (7th November 2016), Debra (7th November 2016), DeDukshyn (9th November 2016), fourty-two (8th November 2016), Foxie Loxie (7th November 2016), Justplain (7th November 2016), Mad Hatter (17th December 2016), mountain_jim (15th November 2018), noprophet (8th November 2016), Olam (16th December 2016), PathWalker (7th November 2016), seko (8th November 2016), Snoweagle (13th November 2016), Sunny-side-up (23rd January 2019), Verdilac (7th November 2016), Zanshin (26th May 2019)

  7. Link to Post #4
    Unsubscribed
    Join Date
    23rd June 2013
    Location
    North America
    Age
    67
    Posts
    6,884
    Thanks
    12,723
    Thanked 29,293 times in 6,140 posts

    Default Re: John Bedini - RIP

    while it is still here:

    http://johnbedini.net/


  8. Link to Post #5
    Deactivated
    Join Date
    6th December 2010
    Posts
    600
    Thanks
    1,824
    Thanked 2,099 times in 520 posts

    Default Re: John Bedini - RIP

    Quote Posted by Bill Ryan (here)
    RIP indeed. Thank you. I had not heard that he'd passed.

    I posted this back in 2010:

    ------------

    Last weekend [4 December 2010] I visited my friend Thomas Kirschner, the editor of the German NEXUS magazine.

    To my astonishment, as soon as I arrived he led me down to his basement and showed me a working Bedini machine. He's started to run courses training people how to make them.

    http://nexus-magazin.de/index/nexus-...-in-der-praxis

    This thing really works (though don't ask me how). In the simplest possible terms, it uses a battery to turn a wheel in which fixed magnets rotate past specially designed copper coils. This induces current which then charges a larger battery. You get out more than you put in.

    Thomas's layman's explanation was that each time the field of one of the rotating magnets passes one of the copper coils, it [sort of] "opens a 'gate' into the zero point, grabs a bit of energy, then closes the gate again". (Interestingly, the machine produces more output when it's rotating at medium speed than when it's spinning really fast).

    Avalon member Carmody may be able to explain a little better than I can.

    References:

    The original Bedini websites:

    <snip>
    you'll find the machine performs differently depending where on the planet you're located, this also includes altitude ie. pos A height H1 will be different to pos A H2.
    Last edited by Aurelius; 7th November 2016 at 19:59.

  9. The Following 5 Users Say Thank You to Aurelius For This Post:

    fourty-two (8th November 2016), Foxie Loxie (7th November 2016), Mad Hatter (17th December 2016), Olam (16th December 2016), Snoweagle (13th November 2016)

  10. Link to Post #6
    Avalon Member Carmody's Avatar
    Join Date
    19th August 2010
    Location
    Winning The Galactic Lottery
    Posts
    11,379
    Thanks
    17,589
    Thanked 82,031 times in 10,210 posts

    Default Re: John Bedini - RIP

    If that is true, then it will also respond to planetary alignments.

    Just like nukes. Which respond to all three, ie... ley lines, gravity, energy flux of the ley lines, or time and the vibratory combinations of planetary alignments which excite the ley lines with various levels of various gatings.

    Scalar energy. Dimensional energy.
    Last edited by Carmody; 7th November 2016 at 23:58.
    Interdimensional Civil Servant

  11. The Following 5 Users Say Thank You to Carmody For This Post:

    fourty-two (8th November 2016), Mad Hatter (17th December 2016), noprophet (8th November 2016), Olam (16th December 2016), Snoweagle (13th November 2016)

  12. Link to Post #7
    Australia Avalon Member Patrikas's Avatar
    Join Date
    10th February 2011
    Location
    Canada
    Age
    64
    Posts
    249
    Thanks
    1,326
    Thanked 708 times in 190 posts

    Default Re: John Bedini - RIP

    Heres Jb,s latest device its a modern version of Rife -Priorie Tech done in Bedini,s way.....
    http://sidebandgenerator.com/

    Utube vid by JB on the RPX sideband generator
    https://www.youtube.com/watch?v=whfg6om-n_c

    A little history from john on his work with with the Real Rife Tech
    http://johnbedini.net/john34/rife.html

    JB,s forum
    http://www.energyscienceforum.com/forum.php

  13. The Following 2 Users Say Thank You to Patrikas For This Post:

    Mad Hatter (17th December 2016), Snoweagle (13th November 2016)

  14. Link to Post #8
    Deactivated
    Join Date
    6th December 2010
    Posts
    600
    Thanks
    1,824
    Thanked 2,099 times in 520 posts

    Default Re: John Bedini - RIP

    ... and they say John Bedini died from a broken heart / natural causes?

    looking at the content of the videos below, i suspect otherwise.

    these videos were taken at a conference in July of this year (2016). John looks pretty healthy, 4 months later he's dead.

    ** take note of what John reveals in the 2nd video.

    the other videos are mainly to do with Royal RR tech, a particular circuit that John says worked ...

    note: the post above is an evolution of the circuit John describes in some of the videos below, but employs the same principles (mixing then gating)













    Last edited by Aurelius; 17th December 2016 at 10:29.

  15. The Following User Says Thank You to Aurelius For This Post:

    Mad Hatter (17th December 2016)

  16. Link to Post #9
    Avalon Member res cogitans's Avatar
    Join Date
    25th January 2016
    Posts
    13
    Thanks
    0
    Thanked 107 times in 12 posts

    Default Re: John Bedini - RIP

    I knew that I have seen what I believe is a similar concept in Homestead Florida at Coral Castle. Atached are a few pics that seem similar to the concept of this machine. The second pic, painted within a 'dish', also appears to possibly show revolutions/amplification/retification of some sort-possibly representating an increase of output power versus input?

    ------------

    Last weekend [4 December 2010] I visited my friend Thomas Kirschner, the editor of the German NEXUS magazine.

    To my astonishment, as soon as I arrived he led me down to his basement and showed me a working Bedini machine. He's started to run courses training people how to make them.

    http://nexus-magazin.de/index/nexus-...-in-der-praxis

    This thing really works (though don't ask me how). In the simplest possible terms, it uses a battery to turn a wheel in which fixed magnets rotate past specially designed copper coils. This induces current which then charges a larger battery. You get out more than you put in.

    Thomas's layman's explanation was that each time the field of one of the rotating magnets passes one of the copper coils, it [sort of] "opens a 'gate' into the zero point, grabs a bit of energy, then closes the gate again". (Interestingly, the machine produces more output when it's rotating at medium speed than when it's spinning really fast).

    Avalon member Carmody may be able to explain a little better than I can.

    References:

    The original Bedini websites:
    Two YouTube videos (also embedded below)






    [/QUOTE]
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	20130921_134833.jpg
Views:	111
Size:	263.6 KB
ID:	34707   Click image for larger version

Name:	20130921_132618.jpg
Views:	95
Size:	214.2 KB
ID:	34708  

  17. The Following User Says Thank You to res cogitans For This Post:

    Mad Hatter (17th December 2016)

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts