How to make a DIY PEMF Machine for Cheap

[Blastolabs]

PEMF = Pulsed Electro Magnetic Frequency
46450

It has been FDA approved to heal broken bones, treat depression, and more although it likely has MANY more uses.

------Insert PEMF studies here-----

What a PEMF machine does is it Pulsed electricity through a coil which created a magnetic field.

The actual REASON and mechanism that makes it work is UNKNOWN

A spinning magnet also creates a Pulsed EM field but DOES NOT work.

This means that pulsing electricity through a coil creates some kind of field that is currently unknown to mainstream science.



Ok. So we need to pump voltage to either end of a coil of wire of and on.

EASY[/B

All speakers are simply coils of wire that we send electricity through.


[B]Step 1


Get a coil of 12-18 gauge copper wire Magnet Wire
It HAS to be magnet wire which is coated or else it will not work.
Wrap the coil so looks about like the size of the one in the picture

Step 2

Solder an audio input jack to the coil.
One side goes to ground, the other side goes to tip

Step 3

Use any audio amplifier

The bigger the better. I just got a 600watt car stereo amplifier of shop goodwill for $25


Step 4

Plug the coil into the OUTPUT of the audio amplifier with an standard audio cable.
Plug a cell phone or computer into the input of audio amplifier


Use any waveform generator phone app to generate square waves at whichever frequency you want.

Pulse Width modulation can be useful to get the best results.


With this setup I am currently getting 1500 - 2000 micro telsa.



I make little electronic devices that send frequencies instead of the phone that have a little screen where you can select the ailment to chose a frequency but the phone works fine in a pinch.



Companies charge $2,000-10,000 for these devices when all they are is a crappy synthesizer plugged into an audio amplifier


Will lost pictures in a few

[Blastolabs]

Other pics, couldn't attach for some reason 46451

[EFO]

Cool and cheap stuff Blasto!

I have a question:how many spires have your coil?Many thanks.

Add the rest of the photos on Avalon Discord.

[meat suit]

Cool and cheap stuff Blasto!

I have a question:how many spires have your coil?Many thanks.

Add the rest of the photos on Avalon Discord.

yes, great stuff Blasto, easy to make,
how do you choose frequencies and how do you apply the device to yourself?
how often and for how long do you treat yourself?

[Blastolabs]

I've made a bunch of coils.
It seems like using thicker wire helps.

The coil in the photo is about an inch and a half thick.
It really pumps out the magnetism. Up to 2000 micro-teslas

I use it for pain and to meditate.
20hz to meditate
8hz for pain

I've been using this chart.

https://www.pemfsupply.com/pages/frequency


PEMF uses healthy electromagnetic frequencies, as opposed to cell phone frequencies, to enhance overall health and wellness. Every cell in the body has a negative charge on the cell wall. For nerve cells, this is approximately -60 mV; other cells may vary in the net negative charge. To maintain healthy levels of this negative charge, potassium and magnesium should be contained inside the cells, while calcium and sodium ideally remain outside the cells.

Obviously, there are scores of fundamentals—vitamins, minerals, hormones—that must be maintained at an optimal level for cell health. The pH of the blood, normally 7.4, is, of course, essential, as are significant excesses or deficiencies of nutrients; and numerous toxins must also be kept at bay. While all these factors play an important role in cell health, the electrical health of cells is one of the most critical of all the vital elements.


A bunch of studies can be found
https://www.drpawluk.com/category/pemf-studies/
https://pubmed.ncbi.nlm.nih.gov/20329696/
https://www.nature.com/articles/s41598-017-14983-9

[Journeyman]

Thank you for posting this. :)

[Scorpio Girl]

Is there any way you could make them and post them to somebody like myself who has lost their handyman and who is a technophobe. I would love one for me and my friend who has a shed load of health problems. We live in NZ.

¤=[Post Update]=¤

Forgot to mention I would pay you the cost of making and shipping postage as well.

[Blastolabs]

I have been thinking of doing this, I think I'm going to order some parts and make a couple at the same time to save time,. I'll keep the forum posted.

I was reading a book about Remote Viewing I found on Rex Research and in it someone mentions multiple studies that found that PEMF can be used to increase what ever brain wave frequency the PEMF is set to.

They claim that theta brain waves (4.5 hertz) are more pronounced during remote viewing and that using a PEMF can help amplify these waves.

My husband was trained in remote viewing from a young age and has proven himself to be very skilled, I put my cheap EEG on him while he remotely viewed and sure enough the theta waves went off the charts for a few minutes.

Pretty cool, I have a feeling that PEMF machines and similar devices have FAR more potential than "mainstream science" realizes so I would love to get a bunch of them out into the world at a price that makes sense. These things should NOT cost anymore than the cost of a microcontroller ($2 for a NICE one) and an amplifier (price range on these is $10- infinity) depending on how much you want to amplify.

I do want to point out that ANY traditional stereo system that uses passive speakers can function as the amplifier



You merely replace the speaker with coil then play square waves through the audio input.

Like most things in science it sounds complicated until you take the time to truly understand what is going on and it as simple as can be

[onawah]

Please count me in.

Is there any way you could make them and post them to somebody like myself who has lost their handyman and who is a technophobe. I would love one for me and my friend who has a shed load of health problems. We live in NZ.

¤=[Post Update]=¤

Forgot to mention I would pay you the cost of making and shipping postage as well.

[Delight]

Thought this should go here. Have not heard it yet....

Spiritual Technology - The Human Charger - Ion PEMF Photon and Infrared

k1_Sg7JStho

[Blastolabs]

I'm working on a circuit board as we speak to make 20 or so PEMF devices.

I realized I made a silly mistake (I'm a musician) and found a MUCH more efficient and cheaper way to amplify the pulsed frequency.

Since I am a musician first and electronics knowledge was some what new when I wrote the write I over complicated the device by using the giant subwoofer amplifier.


I've been learning a bunch about electronics sense then, and one day I realized I could replace the expensive and bulky audio amplifier in my first design with a large transistor that functions as a gate.

Instead of "amplifying" the pulse frequency like you would amplify audio I am now using the pulse frequency to open and close a "gate" that allows ALL of the power of from the power supply into the coil.

This allows the same control over the frequency and WAY more power to enter the coil, which in turn means a much more powerful magnetic/ scalar pulse.

I'm getting a 100 times stronger magnetic pulse with a device 10 times smaller and lighter.

If anyone reading this is somewhat familiar with electricity they will quickly see how silly my previous "musician centric" solution truly was.

Music device I've been working on in the meantime.

I designed the circuit board my self on computer and had it manufactured for me, the PEMF device is a bit more simple so shouldn't be too difficult and would allow for "mass production" or at least the ability to make 20+ devices without spending 10 years soldering

Z5Us8G4BzSM