Beamed ? Easy way to get some relief - COUNTER-MEASURES

[Bob]

COUNTER-MEASURES
to MICROWAVE assault

(examples: dealing with the DARPA MIND CONTROL BEAMS, Dealing with microwave from CELL TOWERS, or Point to Point Microwave)

Howdy viewers,

I have been getting some good feedback from folks letting me know what types of beams, assaults have been happening to them. A lot of what I am seeing looks like electromagnetic microwave assault. I am going to start a separate thread for microwave solutions, but I will post here first a very simple method to "return to sender", a microwave beamout.

I have tested with various "spectrum analyzers", or very sensitive radio wave receivers, and pointing such in various directions including towards the Satellite Belt (where the geosynchronous satellites for TV and radio, and internet wireless services are located). There are quite a few very powerful microwave signals present.

From experience working with people who are sensitive, there are definitely bioactivity reactions that happen when microwaves are present in the environment. Some dastardly weapons types make use of a characteristic in the microwaves which definitely torture people. Many microwave and radio engineers simply don't know the potential bioactive issues, and just poo poo away.

In this thread I can get into a lot of the theory, and the reasons why microwaves (and other sources of microwave-lengths) can cause problems. This doesn't have to be geek-speak, and can be explained very simply.

I want to give us a method for relief, that can be created FAST, easily with minimal effort. It's been known to bring relief in a short as 10 minutes after assembly and tuning.

OK here goes.

What this type of shielding system is, is technically called a microwave black body absorber. It can be used as high up in frequency for ultra short wavelenghts, all the way up through ultra-violet.

It's used in microwave systems, in visible and invisible light systems where one needs to have a type of sink, to destroy the incoming "radiation" and prevent it from going anywhere into the environment behind it. (thereby acting like a shield).

Here is how to build it:

What it is is one takes a hard cover large book, maybe something a foot or so on the pages, full 8 1/2 inch by 11-12 inch pages, good strong cardboard outer cover.

Then maybe about 10 pages in, tape a full sheet of aluminum foil to a page leaf. The aluminum is very thin, acts like a knife edge (which is used as part of the cancelling effect), and it is very conductive. So it will channel the signal along it.

Then skip about 10 pages and tape another full sheet of aluminum foil to another page leaf.. Cover the sheet from the binding out to the edge.

Repeat that until you have done about 10 pages like this (obviously a good thick book).

TUNING IT (creating shielding)

Now, Open the book up so that it can stand up by itself, and spread and separate the pages sorta like they are like a set of fingers opened up, fanned and stretched as wide as possible.

THEN point that book in various directions, rotating it on the table, or counter or near the window.. Place it where ever it creates the most relief.

One can create as many of these shields and effectively "return to sender" the assault.

If it is coming from ABOVE, a little bit of adjustment putting tape across the top and the bottom edges of the leaves will hold the book open so the leaves can face UPWARDS.

Depending on where one lives the Geosynchronous Satellite belt may be to the south of one (if one is in the States, at that Latitude), or it could be to the north if one is in the southern hemisphere.

This device acts as a shield and counter-reflector, putting the reflected signal back out to the sender. It's much better than putting little mirrors up (which is a good spiritual type of shield mockup, but not effective against microwave assaults).

One can spread the pages more or bring them closer to tune (as was done with the hand mudra shielding and biofield tuning).

TUNING lets you customize the shielding for your personal issue, whatever that may be.

The book will keep the setting fixed for you, absorb the microwave and create a reflection back to the source. I've found it very helpful and like close to zero cost to make.

Some folks may want to experiment with putting on the outside of the book a small wrap of about a three inch (3) wide strip and centered along the spine of the book binding, where the remaining front and back cover have a little bit of this strip on them - the width of the overlap on the front and back cover will be different with different thickness books.

The designs specified above deal with the frequencies and wavelengths of typical microwave sources from cell towers, "long lines" microwave, and most satellite based transmitters irradiating people.

Many people have reported the crazy symptoms when the HIGH POWERED TV satellite transmitters were launched.

I did a study on the issues some years back and I will get into that in the separate thread about how its the REFLECTIONS, not the direct signals that cause the bio-effects.

The technique mentioned above is the best almost zero cost solution available.

I hope this helps bring some peace and calmness. Let's start here and not let them harm us any more.

Bob

PS, if you have some pictures of your models, please post them in this thread so others can see the versions you have made. Let's not let them whack us with microwaves, send the stuff back !

My other thread detailing the DARPA mind control projects can be found in the forum at:
http://projectavalon.net/forum4/showthread.php?62807-DARPA-uses-Transcranial-Stimulation-for-Mind-Modification-Are-you-thinking-correctly

[Ernie Nemeth]

Thanks, Bobd.

That's the kind of useful info we need more of. Soon as I have some time I will make one. Got the perfect coffee table book for it too.

[Bob]

It's so easy, I've even made portable versions of this to take to restaurants, put such on the table to deal with local stuff, and it looks kinda cute..

The tuning of it, that's where the most relief happens, setting it to deal with the current microwaves..

[Ernie Nemeth]

I imagine that if you know where the source is, the book should be placed perpendicular to it so that the the beam bounces off the tin foil pages. Umm, not edge-wise facing the source. Like in my situation there is a cell tower on top of a high rise in line of sight of me, maybe around two hundred feet away. So then I should face the book toward the tower, right?

[Spiral of Light]

Awesome, Bob! Thanks so much for this information.

I am wondering if this same principle can be applied to the nasty 'Smart Meter' that was installed in my basement several months ago. Will it provide some protection for the unwanted energy emanating from that, too?

[Bob]

I imagine that if you know where the source is, the book should be placed perpendicular to it so that the the beam bounces off the tin foil pages. Umm, not edge-wise facing the source. Like in my situation there is a cell tower on top of a high rise in line of sight of me, maybe around two hundred feet away. So then I should face the book toward the tower, right?

That's the easiest method. Try different locations in the room tho for placement of the book too. I've had effectiveness by placing such even behind me where I normally sit, where the microwave comes in from a window, bounces around in the house/room then if there is a hot spot where all the reflections seem to be, that spot is the best spot to neutralize - - doing that then one get's all the reflections handled too.

The width that the book is opened tends to act like a very strong tuner, so the best opening width should be customized personally.

[Bob]

Awesome, Bob! Thanks so much for this information.

I am wondering if this same principle can be applied to the nasty 'Smart Meter' that was installed in my basement several months ago. Will it provide some protection for the unwanted energy emanating from that, too?

They put a smart meter here too, the darned thing sends EM to the power company, it sucks that they did that. I can neutralize that effect, pretty well here. U may want to try different sized books to get to the specific frequencies present. The power meter uses very LOW frequencies, but, what happens is there is a interplay between outside satellite microwaves (towers, or the actual sky satellites), and the extra Radio Frequencies created by the power meter transmission circuitry, and everything mixes, and there are lots of interference patterns. Like why do we need more RF in our lives.. (sigh)...

I think though the big issue is the satellite TV signals, those are very strong, strong enough to be when they bounce around to create bioactivity.. We can neutralize those reflections with this simple tool.

Bob

[Bubu]

Thanks Bob. Can you post photo

[Bob]

Some settings that I find very interesting:

About 60 degrees opened, very bioactive

About 75 degrees almost complete neutralization, not having to point it in any particular direction.

89? degrees some sort of crown chakra opening? Can anyone confirm where that contacts?

Sorta this not only then shields/neutralizes, it seems we have some additional possibilities here.

Bob

¤=[Post Update]=¤


Thanks Bob. Can you post photo

I sure will get a bunch of photos posted on that

[Limor Wolf]

Thank you very much, Bobd, your knowledge is extremely useful. Can you say if the Aluminium book is as effective for the targeted individual who has to cope with high amount of radiation aimed directly at them. Or, maybe there is another suggestion for that?

Most greatful ~

[Sidney]

If you have free time, and video capability, a YouTube video would be awesome, to show exactly how this is done. If not thats cool too. Bobd, you have NO idea how much this information is needed and appreciated. Bless you for bringing this simple self defense tool to the table. The only part I am not certain of is the tuning. How do we know if its working. or where to aim it. Many people are beamed when they are sleeping, and not other times. trial and error? I suppose, in the case of the book shield, more is better?? Also, if one lives in a multiple unit housing, is there a chance that we could accidentally beam our neighbor unknowingly?

[Gekko]

Thank you so much for this, I will definitely try it.

I guess this makes me a tin-foil conspiracy theorist, ha.

[Bob]

Thanks Bob. Can you post photo

Here is one of the photos, looking DOWN from the top of the book.
http://projectavalon.net/forum4/attachment.php?attachmentid=22647&thumb=1&d=1378330176
http://projectavalon.net/forum4/attachment.php?attachmentid=22647&thumb=1&d=1378330176

the other images there in my album show various steps. http://projectavalon.net/forum4/album.php?u=17746 (the beam shield pictures album)

Bob

¤=[Post Update]=¤


Thank you so much for this, I will definitely try it.

I guess this makes me a tin-foil conspiracy theorist, ha.

LOL - all us tin foil hatters unite ! :wizard:

[Bob]

If you have free time, and video capability, a YouTube video would be awesome, to show exactly how this is done. If not thats cool too. Bobd, you have NO idea how much this information is needed and appreciated.

Bless you for bringing this simple self defense tool to the table. The only part I am not certain of is the tuning. How do we know if its working.

or where to aim it. Many people are beamed when they are sleeping, and not other times. trial and error? I suppose, in the case of the book shield, more is better?? Also, if one lives in a multiple unit housing, is there a chance that we could accidentally beam our neighbor unknowingly?

Howdy Sidney -

Tuning is very simple. Let's start with recognizing a biofield.

If you hold your hands about 8 inches infront of your diaphram (maybe 4 inches above the belly button), like one is going to assume a prayer position but do NOT touch your hands together. Sorta imagine there is a large grapefruit inbetween your hands. That is about the spacing to use.. Move your hands closer or further from the body, and closer or further from each other. AT the right spot, you should feel something change. Some folks report it as a pressure, some folks report it as a clearing, or a release of pressure, some folks report eyes clearing (focus better, contrast better)... The key is to recognize a change. When you have mastered the ability to sense a change, you are now able to recognize a bio-field.

When the person is able to recognize a biofield, as above with that simple exercise, then you can recognize when tuning is effective.

For instance, a person can lay their hand on the arm of the chair, or couch or on ones leg, and then with palm facing up, and fingers outstretched without any stress, loosely positioned bring them slowly together as if squeezing an imaginary grapefruit. (we call it grapefruiting of all things)..
At some point one would again feel some sensation change (we call that the "change of characteristic"). Pretty simple.

The way my Dad showed me this about 50 years ago was to simply bring one hand, palm facing the body, and move it to the forehead very slowly also and then one would at some point sense the hand infront of the forehead. That again is the biofield sensation..

Any of those methods work to learn to feel the sensation.

Here is where it gets interesting... Any noxious field will block or alter the biofields, and one will know if one feels better or worse. By slightly changing the location where one "feels" by changing the distances between the two objects (like two or more fingers, spacing distance and placement, or the two hands over the solar plexus/diaphragm, or the position to the forehead), that is tuning.

There is a science of what is happening here. But lets save that for another post.

The thing is to be able to recognize the biofield, and then know that by changing position, you change how you feel.

When you can change how you feel by changing a placement of two, or more objects, you are then back in control of your energy space.

Being back in control then means, you have a way to actually neutralize, and reflect back some thing coming in from the outside. That gets back one's free will, and one gets back to being CAUSE instead of being effect..

With the BOOK and the leaves being moved, you will be feeling the biofield change in yourself, by opening and closing the leaves, you would be doing the same type of thing as opening and closing the fingers in the hand positioning. Then by moving the book to different locations around the house or room, one then sees which are the best overall feelings. That is complete tuning then.. :)

Bob

[Bob]

Thank you very much, Bobd, your knowledge is extremely useful. Can you say if the Aluminium book is as effective for the targeted individual who has to cope with high amount of radiation aimed directly at them. Or, maybe there is another suggestion for that?

Most greatful ~


Howdy Limor, nice to chat with you again. The simple book thingy is a very powerful device, passive which uses the amount of stuff beamed at one to create a way to neutralize, and allow for precise tuning to switch the beam over from assault to assist.

The key is learning the sensation of the bio-field tuning. I mention that in another post with Sidney. The key being when the feeling is recognized that one CAN tune, then one can come up with all sorts of innovative methods to deal with whats coming in. The book is a classical method because it contains, absorbers (the paper/cardboard), the metal, the angles.

It uses antenna theory (microwave corner reflector), it uses the ORGONE concept of Reich because it uses metal and insulator metal and insulator so it addresses any solutions one would be able to get with orgonite compounds, and it uses the psychotronic tuning effect becasue one can change the spacing between the pages (and metal layer). In this one simple package, you have it all, and it costs basically nothing.

The key is just learning the biotuning feelings.

Bob

[Bob]

Many people are beamed when they are sleeping, and not other times. trial and error? I suppose, in the case of the book shield, more is better?? Also, if one lives in a multiple unit housing, is there a chance that we could accidentally beam our neighbor unknowingly?

Those are some great questions about not beaming one's neighbor. Thank you so very much for being considerate AND caring ! I have seen a lot of folks just go whacking without looking at what effects one creates.

There is a way when one gets skilled in sensing biofields. One CAN reach out into one's space and sense other fields. What I have noticed though is what one feels in the moment, is the sum total of all biofields in one's environment, including the neighbor, the cat, the birds, and flowers about one, inside and outside. That range can be typically 50 feet around one that one is experiencing biofields from.

So if you tune your own space, and not your neighbors (don't beam them in other words, don't fix them in other words), but just adjust for what you feel, when you feel good, the chances are, you have adjusted the local space, so all others nearby are being benefited. This is stewardship in action, create some beauty about one, and many things bloom, expand and no longer are compressed. A lot here, but this is a start.

Bob

[Sidney]

Thank you so much for the link to the photos. Very helpful!! And for taking the time to answer all my questions. It is true, some of the best things in life are free :) Thank you again.

[Limor Wolf]

Thank you very much, Bobd, your knowledge is extremely useful. Can you say if the Aluminium book is as effective for the targeted individual who has to cope with high amount of radiation aimed directly at them. Or, maybe there is another suggestion for that?

Most greatful ~


Howdy Limor, nice to chat with you again. The simple book thingy is a very powerful device, passive which uses the amount of stuff beamed at one to create a way to neutralize, and allow for precise tuning to switch the beam over from assault to assist.

The key is learning the sensation of the bio-field tuning. I mention that in another post with Sidney. The key being when the feeling is recognized that one CAN tune, then one can come up with all sorts of innovative methods to deal with whats coming in. The book is a classical method because it contains, absorbers (the paper/cardboard), the metal, the angles.

It uses antenna theory (microwave corner reflector), it uses the ORGONE concept of Reich because it uses metal and insulator metal and insulator so it addresses any solutions one would be able to get with orgonite compounds, and it uses the psychotronic tuning effect becasue one can change the spacing between the pages (and metal layer). In this one simple package, you have it all, and it costs basically nothing.

The key is just learning the biotuning feelings.

Bob

Hi Bobd ~

It is very good to chat with you again. I need to tell you that someone there did not like your reply.. : )

A good opprtunity to try it out



Originally posted by Bobd: "LOL - all us tin foil hatters unite ! :wizard::

Apparently George Carlin's - "It's a big club and your ain't in it.." does not apply here,
A person wakes up in the morning and finds out that he/she does belong to several clubs :p

I am limited in words but like Sidney and others I am most greatful to you

[Ultima Thule]

If one would like to shield a house of say 10 by 10 meters, how many of these should be put in? Is one book enough to shield a book sized area or are we talking of somehow cancelling the waves on a larger area via the reflections of the different "pages" fanning out?

UT

[Bob]

Apparently George Carlin's - "It's a big club and your ain't in it.." does not apply here,
A person wakes up in the morning and finds out that he/she does belong to several clubs

Hia Limor - information identification step (find out what's been hiding), find where find who ---- at this point one may be tempted to BEAM BACK love, or beam back anything to try to get the assault(er) to stop. To not get into the beamout cycle oneself, the solution is (besides getting into the "return to sender" techniques mentioned in the counter-measures thread) is to get inside oneself the ideal sensation that one wants the "other" to feel or experience. One gets that feeling inside very clearly and actually LIVES it themselves. THEN one in-vites souce light allness abundance to flow into one, through that pattern of lets call it JOY. The beamer then feels you in JOY (as does everything else), and they either change or they consume themselves in hate or whatever, but they disconnect. And you get better. INFLOW don't beam is the solution :-)

[Bob]

If one would like to shield a house of say 10 by 10 meters, how many of these should be put in? Is one book enough to shield a book sized area or are we talking of somehow cancelling the waves on a larger area via the reflections of the different "pages" fanning out?

UT

Howdy, I am not sure. I use one here upstairs and one downstairs and one in the bedroom. I have some additional "active" hologram generators which I use for psychic dimensional air-freshening. I particularly like dolphin so that is a pattern that I keep up. Like how people put flowers and pictures to change the ambiance, the virtual hologram generator system creates a sensory virtual picture of the subject (as if one were with dolphin for real for instance).

I still feel the best thing is to address where its coming from, then get the tuning set right.

A person can perform a type of Feng Shui adjustment on everything in their home to cancel out the negative microwave reflections in the house. To get to that stage though I mentioned the technique was to learn through the body sensitivity exercises (the hand mudra experience for instance, or hand to the forehead, or over the solar plexus) and know when one evokes the "change"... Then one can move things in the house, even a slight turn of a picture, a movement of a flower vase, book on the shelf, but move them slightly, twist them slightly.. and note the biofield change.

The BOOK black body tuner system is designed to neutralize the local assault and "return to sender" the effect beamed to one. So learning to tune may mean just one is needed. I have three here like I said as I am in the middle of 6 very strong intersecting microwave beams from communications towers.

Thanks for asking,

Bob

[Gekko]

Thank you so much for this, I will definitely try it.

I guess this makes me a tin-foil conspiracy theorist, ha.

On second thought, my joke was probably in bad taste for this thread. Especially with information that could help us find relief, so I apologize.

This is my attempt:
http://projectavalon.net/forum4/album.php?albumid=785

Haven't put the tape on top yet, maybe that'll help keep the pages more even once I 'tune' it.

[Rosieposie]

I just wanted to say I found the source of my issue and it wasn't what I thought it would be lol. I found my problems to be coming from my wireless router, it bugs me now that I've had two years of trouble and it comes from something I could have switched off at any time if I had known. I don't know if it's from me being extremely sensitive and I am uneducated to what sort of energy they emit or if it has been tampered with but all I know is all my issues disappear when I flick the power off the thing.

So to anyone else feeling like they are having problems, maybe just check that as well as the usual list of subjects like cell towers etc.

[Bob]

Thank you so much for this, I will definitely try it.

I guess this makes me a tin-foil conspiracy theorist, ha.

On second thought, my joke was probably in bad taste for this thread. Especially with information that could help us find relief, so I apologize.


This is my attempt:
http://projectavalon.net/forum4/album.php?albumid=785

Haven't put the tape on top yet, maybe that'll help keep the pages more even once I 'tune' it.

The tape is good for holding the pages rigid in the desired tuning. The more aluminum leaves in there on the groups the more the antenna action happens and more cancelling.

I am not sure what number is optimum though. Bob

[Bob]

I just wanted to say I found the source of my issue and it wasn't what I thought it would be lol. I found my problems to be coming from my wireless router, it bugs me now that I've had two years of trouble and it comes from something I could have switched off at any time if I had known. I don't know if it's from me being extremely sensitive and I am uneducated to what sort of energy they emit or if it has been tampered with but all I know is all my issues disappear when I flick the power off the thing.

So to anyone else feeling like they are having problems, maybe just check that as well as the usual list of subjects like cell towers etc.

Rosie that is great news !

This is the second time I have heard this being a source of sensitivity.

It could be a combination of cellphone towers PLUS the WIRELESS router.

Now I wonder about folks in an apartment building/condo where there may be more wireless routers..

I have a friend in South Korea who has also reported strange stuff coming in from the wireless, which was driven by a cable modem (the cable modem contains lots of RF signals too). He found everything was leaking RF into the room from the cable, and being on the 9th floor he was getting all sorts of microwave from transmitters all over the city.

I will be doing up a forum post soon on the mechanics of just how microwaves do their thing to create these issues. All the testing organizations have said all these microwave fields are below the level of perception. And in the tests they do, they do it so that it is NOT in a real world situation, so the test subjects say NO MICROWAVE HEATING happens, so obviously at those power levels there is no issue they say. That so totally covers up what really happens. And it happens when there are phase shifts and reflections and mixing of signals in a living organism (or anything which can act like a mixer diode)..

Thanks Again Rosie ! Folks please do try what Rosie mentioned.

The fellow in South Korea installed additional hard wired ground rods and ran grounds from the modem and router thereby sending a lot of RF leakage into the ground.

A friend in Texas found that her MAINS power box had a defective ground on it, and there was leakage into the house of 60 cycles and 180 cycles (3rd harmonic of the power) into the house. Again the solution was fixing the grounds...

Bob

[Bob]

Thank you so much for this, I will definitely try it.

I guess this makes me a tin-foil conspiracy theorist, ha.

Hi Gekko, I just saw your pix for the book tuner.. LOOKS GREAT ! http://projectavalon.net/forum4/album.php?albumid=785&attachmentid=22696&commentid=326#picturecomment_326
http://projectavalon.net/forum4/attachment.php?attachmentid=22696&d=1378431420
Bob

Just a reminder, a piece of aluminum on EACH page of those groups of leaves is needed. Each aluminum foil sheet bounces the signal off the other aluminum foil sheet, and there is the organic material (the paper), separating the metal layers - so that is an ORGONE configuration.

Because there is an angle, the reflection between the angles of the leaves creates the diminishing distance that the bouncing of the signals happen on.

As they bounce closer and closer they are cancelled out. When they pass through the organic material they create the phase cancelling "return to sender" wave.

[crosby]

okay bobd, i have a question, wouldn't the tin foil act as a receiver as well? i do not know much about these things, but could you help me with this?
warmest regards, corson

[PurpleLama]

okay bobd, i have a question, wouldn't the tin foil act as a receiver as well? i do not know much about these things, but could you help me with this?
warmest regards, corson

Indeed, I had previously been given to understand that aluminum worked as a carrier and amplifier of certain energies, hence its presence in chemtrails, etc. and that ye olde foil hat was actually a very bad idea. From the same source whence the understanding came, it was also pointed out that there is in fact a special paint one might purchase (I found it on amazon) that will actually block all manner of RF.... when I can get around a computer later today, I will try to remember to find it again and edit a link into this post.

http://www.amazon.com/YShield-Shielding-Paint-HSF55-Liter/dp/B00B9NVW54/ref=sr_1_8?ie=UTF8&qid=1378480797&sr=8-8&keywords=emf+paint

[Bob]

okay bobd, i have a question, wouldn't the tin foil act as a receiver as well? i do not know much about these things, but could you help me with this?
warmest regards, corson

Hi Corson, thanks so much for the question

yes it would - it is supposed to receive, pickup capture the assault (better that book than the person).

The book captures the assault the energy into itself, and within it the organic material, and the back reflector, a pattern is created inside the whole book assembly to create a "beam back to sender", with an amplification - meaning the sender gets back it's own assault at a strength of up to 10X (the theoretical gain of the corner reflector). When the user tunes it right, from experience I have found it is able to suck out a bunch of negative effects in the environment and dump those too. Each group of page leaves needs to have the metal on it, and the organic behind it. So the combo of metal plus organic is needed, and the angular relationship, that fan shape.

In tuning, one is perceiving from one's location, from one's viewpoint, what's happening in the room, one's space. So if you TUNE for the correct clear feelings, and achieve relief, you have created a safe space. That safe space then can act like a MODEL space for others to choose to emulate. BE the MODEL - tweak for the best feelings.

The idea of the TOOL is to give people a way to take back and be at cause in stead of being at effect.

So yes, it will suck in, but REVERSE and send back to the beamer the assault. The tuning lets the user choose how well one feels, how much one is supported.

Bob

[Bob]

okay bobd, i have a question, wouldn't the tin foil act as a receiver as well? i do not know much about these things, but could you help me with this?
warmest regards, corson

Indeed, I had previously been given to understand that aluminum worked as a carrier and amplifier of certain energies, hence its presence in chemtrails, etc. and that ye olde foil hat was actually a very bad idea. From the same source whence the understanding came, it was also pointed out that there is in fact a special paint one might purchase (I found it on amazon) that will actually block all manner of RF.... when I can get around a computer later today, I will try to remember to find it again and edit a link into this post.

http://www.amazon.com/YShield-Shielding-Paint-HSF55-Liter/dp/B00B9NVW54/ref=sr_1_8?ie=UTF8&qid=1378480797&sr=8-8&keywords=emf+paint

Hia Reilly - I suppose one could use the paint on the pages, but the point was to create some offset distance, or enough organic matter between the conductive layers.

I would think one could experiment with the thickness or the organic layers (the pages without conductive metal on them) to determine what is the best ratio of organic to conductor. My experience is about 10-15 pages is a good thickness on an average book to ONE sheet of aluminum foil. I don't know the mil thickness of the foil, I haven't mike'd it.

On the paint coats for RF shielding, I have seen ZINC is used and COPPER, and sometimes ALUMINUM.

Ingesting ALUMINUM or ZINC or COPPER metals obviously is crazy.. In the concentrations used as RF reflectors, there is no absorption and re-radiation of the psionic pattern of the metal. The psionics is being tuned to deal with the incoming beam, not to be tuned to beam the book contents obviously, so the purpose is on the job intended. Using a book design like that for beaming out it's contents in this configuration simply isn't a good configuration as a radionics/psychotronics beamer... The focus of this tech is to use existing tools commonly found in the house and kitchen (notice I used a cookbook :) ) and come up with a way to neutralize assaults that come into the home.

As to the carrier you mention on aluminum in chemtrails, that is a dispursed very finely divided particle, and like ingesting ANY METAL, that's stupid to be doing that. All one wants is conductivity.

If one is afraid of metals, then all the forks, knives spoons toss the refrigerator out the window, get rid of the doors in the house and live in the Tee-Pee, in skins.. Or go live underwater with water being the shield about one.

Since nobody is going to go that radical, the solution then is to use the things in the environment we have and with knowledge adjust things. Deal with things and issues. Make lemonade with the lemons..

The above method is a way to do that, Reich did that with Orgone..

It's easy to do if one takes the time to look at the science and see what's happening, right?

Bob

[PurpleLama]

The paint would be applied to the walls, inside or out, actually shielding whatever is within....

I am still concerned, that if the book will capture signals, amplify them, and send them out, what is to prevent any living body in the vicinity from in turn absorbing said amplified signal?

[Bob]

The paint would be applied to the walls, inside or out, actually shielding whatever is within....

I am still concerned, that if the book will capture signals, amplify them, and send them out, what is to prevent any living body in the vicinity from in turn absorbing said amplified signal?

EVERYONE and everything absorbs everything - that is the point. AND people and things succumb to what they absorb, growing old, cells get damaged and dna gets eroded. That is happening daily, continually, non-stop 24/7.

What we are talking about is taking back our methods to tune our environment, and what we FEEL in our space for about 50 feet around us is the sum total of all the beams, all the life, all the negative and all the positive.

Some folks have said COPE by meditating - one is still beamed tho, and a small space IS setup in that 50 foot radius where things have to CONTINUALLY be held in place by the meditator to KEEP IT RIGHT. (so, one then is reduced to being a LIGHT ANCHOR having to fix things) - they it seems to me "they" have one forcing people to be light anchors meditating to use their own personal energy and mind to keep things right...

Some folks have said whack the beejezus out of them - shut them all down, and that gets into a nasty pissing match, and no long term solution happens.

We propose, come up with a PASSIVE WAY, which is tunable, that the user who is being whacked TUNES for good feelings locally in their own space. And that tuning adjusts the reality passively so that any assaults ARE turned around and sent back to the originator at a 10X signal strength. In other words, the beamer gets their own crap back at 10X signal strength (due to the antenna design, the microwave corner reflector shape and configuration). It is the responsibility OF the user of the BOOK to see that the BOOK remains being used and tuned to keep the feelings correct in their space. If the assaulter changes, the user can simply reposition, re-tune the book. The assaulter after a while we are going to assume will realize their effects are not taking hold, and they themselves are getting affected by their assaults on others - the system then corrects using this logic because of the "return to sender".

IT IS THE JOB of the tuner to learn the bio-field feelings, and they do know how they feel. They ARE feeling 50 feet around them, from all of their neighbors, from all of the life about one. If the person doing the tuning does their job, when THEY feel good, they will likewise be feeling what others are feeling, and the synergy between all will come UP in vibratory and spiritual tone. One tunes to reduce the stress assault, everything comes up in vibratory tone.

Historically one can be a stupid magician, an evil magician and wreak havoc on one's neighbors. The inconsiderate lets to the 3AM heavy metal party in the apartment above when folks are trying to sleep happens all the time - and the committees, the moderators, the adjusters come out and try to solve the rabble rousing issue. The evil magician dramatizes what they feel they have to do to justify that they are powerful, able to be right over others, cause at one time, some other managed to best the "evil magician" and they are determined to "teach them all" what wrath is like. That is history, and that goes on now. It's a mindset of stuck on stupid.

The point is to give back to people who have been rendered powerless by insidious assaults some way to gracefully return to sender the assaults. The teaching comes in to instruct the users of the BOOK to FEEL when they tune, their space and 50 feet surrounding themselves (which they are doing naturally).

Hope that helps understand the reasons and yes it does send out, a return to sender of what was beamed into the person. The nature of the structure of the book, the orgone manufacturing method is designed to evoke a general healing anyway, so its something that one would want even if the tuning wasnt as best as it could be. Precisely tuned I believe we could very well see miraculous spontaneous events happening.

Bob

[Ernie Nemeth]

Hi, I've missed some points because I stuck on the design right now. Last nite while watching videos, I built one of those shields. It did not work as I thought it would. So I went and looked at your pics but they do not help either. In some of your posts I see you saying something about a "stack of foil pages". That one threw me, so, would it be alright if I try and clarify the proceedure? I hope so...

1. Find a large hard cover book the size of a page of looseleaf paper or so.

2. Open the book and tape a piece of tin foil the same size as the page, with no overlap (don't want the foil pieces to touch and short each other out).

3. Attach a piece of tin foi, as above, to a number of (? 5 - 10?) consecutive pages.

4. Once you have this first stack, tape them all together into one "stack", so that they work as one combined page.

5. Skip about ten pages and repeat proceedures 3 and 4.

6. Continue this proceedure throughout the entire book.

7. When finished, the book should be a collage of alternating thick pages of layered tin foil, interspersed by loose, unaltered pages.

8. Edit to add this part: Remember to cover the spine of the book, on the outside with tin foil, wrapping around the front and the back of the book a few inches.

9. Place sheild in desired location, fan out pages.

10. Atunement can be achieved by changing the gap between the pages and the overall orientation of the book itself.

[Carmody]

It's so easy, I've even made portable versions of this to take to restaurants, put such on the table to deal with local stuff, and it looks kinda cute..

The tuning of it, that's where the most relief happens, setting it to deal with the current microwaves..

I worked on the theoretical design characteristics of a wide band electromagnetic system (DC to lightspeed), and I came up with a near identical answer - in the mid 90's.

This is effectively a oh...bandwidth of about 1ghz to lightspeed, on an approx 12" book. It's more an interference creator, a reflector, if you will.

There are acoustical analogies to diffraction.

The aluminum means it is effective at and with dark matter wavelengths, or dimensional waves.

IIRC aluminum is a 1/2 speed filter for dark matter/dimensional waveforms, so there may indeed be cancellation going on. (Kozyrev said it stopped the waves but another source says it slows them by half)

9 terahertz is the area, but don't quote me on that. I calculated it once, but I can't remember the basics I used for the equation.

The problem is not just the wi-fi or the microwaves on their own, per se, it is the random recombination to higher harmonics. Nevermind the distortions that each carry within their own creation.

understand that we MAKE dark matter antenna and receiving systems VIA this exact situation.

Hell, we use this to make lasers beams. Every damned day.

Which is what the purveyors of these high RF frequency transmission technologies refuse to consider. They refuse to consider the reality of harmonic coupling in RF dense environments. (harmonic coupling of high frequency RF fields creates peaks of energy at MUCH higher energy levels and much higher frequencies.) (this is standard run of the mill wave integration theory and reality, 101)

The prediction is that in 20 years we will look back at this time as being one of technological retardation. None of this stuff will be allowed.

This takes you straight to pyramids. Find posts by me on this forum with key words of pyramids, ley lines, etc.

[Bob]

It's so easy, I've even made portable versions of this to take to restaurants, put such on the table to deal with local stuff, and it looks kinda cute..

The tuning of it, that's where the most relief happens, setting it to deal with the current microwaves..

I worked on the theoretical design characteristics of a wide band electromagnetic system (DC to lightspeed), and I came up with a near identical answer - in the mid 90's.

This is effectively a oh...bandwidth of about 1ghz to lightspeed, on an approx 12" book. It's more an interference creator, a reflector, if you will.

There are acoustical analogies to diffraction.

The aluminum means it is effective at and with dark matter wavelengths, or dimensional waves.

IIRC aluminum is a 1/2 speed filter for dark matter/dimensional waveforms, so there may indeed be cancellation going on. (Kozyrev said it stopped the waves but another source says it slows them by half)

9 terahertz is the area, but don't quote me on that. I calculated it once, but I can't remember the basics I used for the equation.

The problem is not the wi-fi or the microwaves on their own, per se, it is the random recombination to higher harmonics. Nevermind the distortions that each carry within their own creation.

understand that we MAKE dark matter antenna and receiving systems VIA this exact situation.

Hell, we use this to make lasers beams. Every damned day.

Which is what the purveyors of these high RF frequency transmission technologies refuse to consider. They refuse to consider the reality of harmonic coupling in RF dense environments.

Hia Carmody - I had thought about using the split ring type of system, basically slots in a tube as an absorber, but with the corner reflector, the interference trap between the decreasing angle and the incoming wave plus the cardboard stock acts to black body absorb and remove the incoming assault. What is not obvious to folks is the non-thermal scalar resultant created during the interaction in the cardboard.. The placement of the pages then allows for the psychotronic tuning and interaction with the nervous system of the operator. So if the operator is cognizant of the feelings, they have a simple tool, able to be made out of easy household items.

That was the whole idea, simple and household items. And this is something that nobody is going to try to sell as some apparatus as a psionics neutralizer. Trying to get folks off the capitalistic trap and just back into taking charge of their own space and doing something so that they are not feeling trapped..

Thanks for sharing the experiences you have found.

Up to the terahertz range, ya probably inside the cardboard with the field charges being neutralized and transferred to the dielectric.

Sorry folks for the geek speak - its pretty simple tho,:playball:

Carmody, maybe you want to start up with me a reason why microwave reflections INSIDE human bodies eat them up as opposed to non-heating happening from low powered signals. They ate Becker alive for pointing out that people ARE getting bioactivity effects from electromagnetics, but he didn't explain clearly the interaction effects.

Below is a picture of reflections and interactions. The cross-over points are where the zero point holes appear. IN the holes is where things can get eaten away.

What we want to stop as quickly as possible is when the microwave is being absorbed bypeople, living things, we want to remove as much assault from getting in in the first place - the added advantage if the psi tuning is one can deal with the assault's intention from the purveyors of the assault(s) - lastly, the psychoactive effects locally are tunable, so any damages locally from prior beaming can start to be repaired and "feel-good" effectively evoked.

As you pointed out, the LIGHT TRAPS are used all the time with lasers (and in microwaves) to cancel out and get rid of signals (beam dumps)..

http://chanlo.com/images/point-interference.jpg http://chanlo.com/images/multi-point-reflection.jpg

A pebble tossed into a pond causes waves to travel out - the diagrams above show the interaction of TWO pebbles, or stimulations interacting - its that interaction where trouble can happen, at the cross-over points. Lots in there for another post..

22712 22713

(animated images from Ask The Physicist .com)

[Ernie Nemeth]

Micro waves are short (micro) wave lengths in the thousandths of an inch range (going by memory). The idea is to capture incoming microwaves between the leaves of foil. To do this the space between leaves must approximate the length of the wave. Like Carmody said, it is how lasers are made (kinda). Since the wave is the same as the distance between sheets of foil the energy gets trapped, bouncing off the enclosures reflective foil walls in a series of cascading wavefronts that either cancel or ( as I guess the arrangement makes more likely) collects and increases the signal. Because of the angle of incidence and the book's configuration the emitted and attenuated wavefront travels back along its own path to the point of transmission. Something like that, right?

If so, then what Reilly and others are asking is, how accurately does the return wavefront target its emitter, and does the orientation of the book have anything to do with the direction of the outgoing, amplified wave?

Since the thing is an amplifier/transmitter it is a valid concern.

[Bob]

Micro waves are short (micro) wave lengths in the thousandths of an inch range (going by memory). The idea is to capture incoming microwaves between the leaves of foil. To do this the space between leaves must approximate the length of the wave. Like Carmody said, it is how lasers are made (kinda). Since the wave is the same as the distance between sheets of foil the energy gets trapped, bouncing off the enclosures reflective foil walls in a series of cascading wavefronts that either cancel or ( as I guess the arrangement makes more likely) collects and increases the signal. Because of the angle of incidence and the book's configuration the emitted and attenuated wavefront travels back along its own path to the point of transmission. Something like that, right?

If so, then what Reilly and others are asking is, how accurately does the return wavefront target its emitter, and does the orientation of the book have anything to do with the direction of the outgoing, amplified wave?

Since the thing is an amplifier/transmitter it is a valid concern.

Inside a cavity, what we are doing is creating a beam dump as Carmody pointed out - there are interferences which cancel out.

7 centimeters through 12 centimeters generally is the size of the aperture needed to deal with the AT and T longlines microwave towers which deal with long distance communications (those towers you see with the drums on them). The 12 centimeters sizes get into the Cell phone but cellphone depending on where in the world one is, the frequencies vary so the wavelenghts get progressively shorter. Our wireless LANs can be on the 2 gigahertz range band or the 5 gigahertz band. So the ideal "book size" to deal with the lowest frequencies, the longest wavelengths which we are assuming have very nasty bioactivity potential should be about 12-16 inches in size.

For the short wavelength internet satellites, and television satellites, a small book the size of a matchbook should work adequately.

Generally if the longest wavelengths can be intercepted, the shorter wavelengths will just fall into the slots and bounce around inside the book and get taken apart and absorbed by the cardboard. That is where they are "orgonized" to use a word that Reich would use to try to define the interaction between a dielectric (cardboard) and a conductor..

It is in the interaction between the electromagnetic waves, the E field primarily in the dielectric (the cardboard) where the PSI effects tend to happen.

Bob

[Bob]

If so, then what Reilly and others are asking is, how accurately does the return wavefront target its emitter, and does the orientation of the book

In working with psychotronics, radionics, and psionics, what I have found the first key is to learn bioactively what it feels like when one is in positive stable resonation with something or out of resonance. Out of resonance will create a type of sickness feeling, destructive interference is happening and toxins are produced cellularly. In resonance, there is a support feeling, and the destructive processes tend to diminish..

With anything like the tuning that Galen Hieronymous for instance found out, or Ruth Drown, or in using the de la Warr camera, the angle of the conductive parts within the device, plus orientation was needed. That is tuning.

In the case of the "book system" what matters is what the person doing the tuning feels, and the actual mechanics or physics of neutralizing the sender in a highly tuned system could be highly quantum in nature, or even super-luminal (faster than light, traveling at the speed of consciousness). So that can be looked at also.

As the tuner person doing the tuning is getting about 50 feet perception in their sensory space and interaction in there, is there a contribution of others coming into alignment, removing the assault by a local "book" being tuned? Again, this may open up what THOUGHT SYNERGY means - tuning for beauty - what will that do?

Bearden seems to think that a "kindling" will happen and that will spread. Others on the forum have said think good thoughts, thoughts manifest things - so we are looking at the metaphysics of all this.

The book then is a simple tool. Tune it the highest, tune it the best, maybe open up some quantum holographic manifestation windows for global healing. If in the littlest effect it can provide some relief, then thats enough.

There is definitely physics and metaphysics involved here - definitely what Avalon gets into :)

Bob

[Bob]

Carmody says: The prediction is that in 20 years we will look back at this time as being one of technological retardation. None of this stuff will be allowed.

This takes you straight to pyramids. Find posts by me on this forum with key words of pyramids, ley lines, etc.

Reminds me of the times of the Pyramid Wars, the Viminas, the rise and fall and deactivation of all that stuff over the eons of time, what was it, 14,500 years ago all that was supposed to have happened?

I have heard it took 6000 years for all that stuff to be shut down, so maybe 20 years is a bit optimistic all this will be fixed. I sure hope so. I bet it can be done but the people in general are going to want to have it. I think tho the idea that people can be infinitely powerful and insidiously so behind the scenes is troublesome, the psyche en-masse may not be wanting such a transition. I'm kinda looking to see where people are at. I think "reaching now for solutions" in general is where folks are, but I hope my view is not incorrect. We'll see.

[Ernie Nemeth]

So here's my attempt. Over 30 feet of foil, 60+ foil leafs. Good use of the old windbags, too (re: the book).

2272422725

I cannot feel anything from this device, except occasionally a choppy sort of interference thingie. Especially when moving the pages around.

The first pic shows how I stacked the leaves in eights(towards the back) and fours(at the front) - don't know why I did that...seemed right. At first I was going to use seven throughout but that didn't feel right.

The second pic shows where I put it, high up on my bookshelf,again, it seemed right.

Still working on how it changes the feel around me.

[Bob]

So here's my attempt. Over 30 feet of foil, 60+ foil leafs. Good use of the old windbags, too (re: the book).

2272422725

I cannot feel anything from this device, except occasionally a choppy sort of interference thingie. Especially when moving the pages around.

Bob: Move the pages slower, and when you find a strong "CHANGE" use some tape to hold the page in place - microwaves are short so tuning has to be precise

The first pic shows how I stacked the leaves in eights(towards the back) and fours(at the front) - don't know why I did that...seemed right. At first I was going to use seven throughout but that didn't feel right.

The second pic shows where I put it, high up on my bookshelf,again, it seemed right.

Still working on how it changes the feel around me.

Very nice layout - try changing the width to about 89 degrees (just less than 90) and then try the hand mudras that I had mentioned, and then verify that you can sense the hand mudra sensation and/or the bringing of the hand to the forehead for the spot which evokes some sorta change. Tuning the book is pretty much like noticing the change in characteristic in the body biofield.

Then move the book to a place and position where you have the best feelings in yourself. It may be most destressed, it might be most relaxed, most clarity or best vision - any of those most or best tunings would be from reducing some of the outside microwave assault.

Bob

[Bob]

The paint would be applied to the walls, inside or out, actually shielding whatever is within....

I am still concerned, that if the book will capture signals, amplify them, and send them out, what is to prevent any living body in the vicinity from in turn absorbing said amplified signal?

I wonder if you could dedicate a specific type of "quantum tuning sigel or RUNE symbol" would be appropriate? One would create the pattern out of the foil and put it on the front and back covers of the book. This particular RUNE I think may be appropriate and generic (Wunjo):

22726

(from http://www.enneagraminstitute.com/forum/topic.asp?TOPIC_ID=27188&whichpage=3#.UivdF8Y3uSo)

[Bob]

Hi, I've missed some points because I stuck on the design right now. Last nite while watching videos, I built one of those shields. It did not work as I thought it would. So I went and looked at your pics but they do not help either. In some of your posts I see you saying something about a "stack of foil pages". That one threw me, so, would it be alright if I try and clarify the proceedure? I hope so...

1. Find a large hard cover book the size of a page of looseleaf paper or so.

2. Open the book and tape a piece of tin foil the same size as the page, with no overlap (don't want the foil pieces to touch and short each other out).

3. Attach a piece of tin foi, as above, to a number of (? 5 - 10?) consecutive pages.

4. Once you have this first stack, tape them all together into one "stack", so that they work as one combined page.

5. Skip about ten pages and repeat proceedures 3 and 4.

6. Continue this proceedure throughout the entire book.

7. When finished, the book should be a collage of alternating thick pages of layered tin foil, interspersed by loose, unaltered pages.

8. Edit to add this part: Remember to cover the spine of the book, on the outside with tin foil, wrapping around the front and the back of the book a few inches.

9. Place sheild in desired location, fan out pages.

10. Atunement can be achieved by changing the gap between the pages and the overall orientation of the book itself.

Hi Ernie - I put a single aluminum foil sheet on the inside cover page, then skipped what felt right, 10-14 pages and inserted a toothpick placeholder, then put a single sheet of aluminum foil on the second stack. Inserted a toothpick after about 10-14 pages, then on the next group put a single sheet of aluminum foil. Each bundle has one sheet on it.

The idea with that was to allow for maximum angular tuning and maximum amount of paper (the non-metalized page) for absorption. That layout then duplicates the Reich style ORGONE generator. In this case then we have multiple orgone generators that have a way to angle each layer (by moving the page groups, and the outer two covers - front and back)..

Many layers of foil/paper means a lot of tuning has to be done to setup the angles. I think from the pictures we have 9 or 10 bundles. So 9 or 10 foils are all that are used.

Bob

[Bob]

So here's my attempt. Over 30 feet of foil, 60+ foil leafs. Good use of the old windbags, too (re: the book).

2272422725

I cannot feel anything from this device, except occasionally a choppy sort of interference thingie. Especially when moving the pages around.

The first pic shows how I stacked the leaves in eights(towards the back) and fours(at the front) - don't know why I did that...seemed right. At first I was going to use seven throughout but that didn't feel right.

The second pic shows where I put it, high up on my bookshelf,again, it seemed right.

Still working on how it changes the feel around me.

Have you located in your house where the microwave is coming in? Is there a particular spot which when you move into, you notice something different? Maybe thats the spot to put it in and tune it in that spot ?

[Ernie Nemeth]

Okay, I'll edit the proceedure to reflect your recommendations. I'll make another one today, if I have time. I'm gonna leave this one the way it is though. My ears have stopped ringing and it might be because of this antennae. But Sundays the ringing often stops. I love Sundays for that reason. We'll see if my ears stay clear into tomorrow. Except the damn book is taking up my mouse space. Gotta work around the book. But I won't change it since, well my ears, I like not hearing the ringing...

edit to add: I did place a little crystal on top of the book, an idea I got from your suggestion of using runes, just before going to bed last nite (amethyst)

[Bob]

Okay, I'll edit the proceedure to reflect your recommendations. I'll make another one today, if I have time. I'm gonna leave this one the way it is though.

My ears have stopped ringing and it might be because of this antennae. But Sundays the ringing often stops. I love Sundays for that reason.

We'll see if my ears stay clear into tomorrow. Except the damn book is taking up my mouse space. Gotta work around the book.

But I won't change it since, well my ears, I like not hearing the ringing...

edit to add: I did place a little crystal on top of the book, an idea I got from your suggestion of using runes, just before going to bed last nite (amethyst)

Hia Earnie

When Hieronymus started work with his psychotronic machines, what he did was use vernier controls, cause coarse movement bypassed the needed resonant and anti-resonant points.


22741

When DeLaWarr built his psychotronic camera he put a very fine vernier adjustment on the primary coils, because coarse movement bypassed point needed to be accessed cause of over-shooting them. The DeLaWarr camera was a device that could tune into PAST TRACK and allow for images to be created and recorded on film or plates, of PAST EVENTS, from a witness of a current object. That says that the time phases still exist and can be quantumly tuned into..

You've seen these things:


22739

The planetary gears inside the vernier dial allow for a very slight movement of the output shaft, with a large movement of the dial. Such very slightly moves the output.

Vernier tuning dials on the psychotronic apparatus then means folks have seen that very slight and very precise tuning is needed. That cued me into understanding we are dealing with microwaves, and then I started looking at various resonant frequencies.

DNA for instance has Microwave resonance in the 49-55 gigahertz bands. There are oxygen resonance in the 60 gigahertz bands

Water is resonating in the 15-19 gigahertz bands.

When we translate those frequencies into the wavelengths of those signals, we see distance from about 2 tenths (.2) of an inch up to 3/4 inch... Those wavelengths then need to be expressed across the horizontal distance between the metal plates. Since they are decreasing more and more closer as the pages get to the center binder of the book.

The longer wavelengths from the Wireless house phones, one's microwave oven, and Wireless G and Wireless N routers are in the 2 inch to 5 inch lengths. SO the pages that are separated by those distance will be responsible for dealing with those wireless router frequencies.

Going lower, we have hydrogen resonance at 9-10 inches, and cellphones as low as 14 inches. (Thats why I used a large book to cover that far).

The old pioneers when tuning found that they had to use ultra precision movements to get to the resonant points and anti-resonant points.

I don't think we need to come up with that much precision with verniers and precise ultra-flat sheets, and unique dielectrics for the absorbers.

The idea was to allow for common over-the-counter household items to be setup so that folks can get some relief.

The learning of the feeling of bio-fields when they change in some way obviously is one of the more important factors.

I've been curious about the RUNES symbolical patterns and of course the Hebrew Flame letters. Each to me means there is a relationship in time/space signature of a 3D antenna designed to do some type of "work".

My experiences in Cheops in 87 let me play with some of the acoustical gravitational resonances and record some of those for later FFT exploration.. Pretty interesting..

Anyway, slight adjustments, and go for recognizing the feelings when moving your hand near your forehead.. At the resonation point when you feel something, that feeling is what we are looking for with tuning - changes like that.

I like the quieting effect that you noticed. To me the ear nerves that are accessible in the jaw resonate in the 30-40 gigahertz range - that is about 3/8ths inch in wavelengths. Try optimizing the leaves that are space that far apart to see if you can optimize.


22740

The DeLaWarr camera as you can see is chock full of very fine tweaking thingies.. BUT when things were set just right, excitation sound waves (he used sonic microwaves), put a witness in to get a phase lock on the "object's reality signature", he then could move forward and backward in time and look at the outcome and history of the object getting the reference slice of reality.

Thanks for the update

Bob

[Bob]

Very simple primer on TUNING so that one can recognize a BIO-FIELD.

This is kinda a fun exercise, and it lets one start to understand Clinical Kinesiology a bit, Reike, Hand Mudra's..

22744

Please look at the illustration for the hand positions and try to get as close as you can to the positions - it's pretty easy, you can try eyes open or eyes closed.

When doing this with closed eyes move your right opened HAND (palm facing you) with fingers stretched out (like you're going to wave) from about a 1/2 meter or thereabouts towards your forehead.

At some point, you will FEEL something happen - it might feel very subtle at first, but something seems to change.

Move your hand back and forth in that "change spot" until you can recognize it clearly. Try it then with your eyes opened. You've experienced your first biological wavefront.

As one becomes more sensitive to recognizing this "change in characteristic" response, lay your hand on a table, like next to your mouse (no not a real one, ur computer mouse ;), take your thumb and middle finger, and gradually SLOWLY close them together, palm UP - open & close them slowly, when you recognize a sensation, the "change in characteristic" - this again is a noting when the wavefront's have started to interact with your own emissions, the microwave in the environment (the background "noise of the universe").

More "tuning" shown here:

22742


What one is doing is "tuning" the reflectivity patterns to alter the placement of the nodes and anti-nodes.

At some point one would have, if you are quiet enough to sensed something change, possibly a feeling would be noted. One would have then acted as a "biological sensor". Knowing what is happening in your environment is important.

22743

(Note in Image 3 above, one can use this grounding technique, if the stuff coming in from "out there" is just too much. It is something that can be done quickly and anywhere. I have found it can save you from overloads.

Those are a couple techniques that one can use to learn what it feels like to sense a bio-field. The CHANGE that you get from nothing to something back to nothing, that transition point.. that point shows the boundary edges of the wavelengths that you are tuning into. If you measure the distances between multiple nodes you can then track out the actual wavelengths of the biofields.

That type of measurement, accurately measuring using a meterstick or ruler was how the old pioneers determined bio-resonant wavelengths. Simple but overlooked in modern days.

Bob

[Ernie Nemeth]

Really enjoying the no ringing in ears - second day in a row!
Sure would like to say this apparatus works, but not quite ready to yet. Got a bit more experimenting to do. My fan is acting up, and it is right in the path of the reflected signal. I wonder if this thing has anything to do with that...
Oh, I almost forgot, last nite there was a massive explosion in a secret (camaflauged) power transforming station - that as far as I can see powers the cell towers on the high rise next to our small building. The explosion was very loud (not a tire blowing out) and it emitted a brilliant blue-white light (electrical arc). Not sure if this thing had anything to do with it but it is quite a coincidence.
It was so loud I actually ducked my head under the sill of the window - I thought it was a bomb. And I'm not at all jumpy, usually.

[Bob]

Really enjoying the no ringing in ears - second day in a row!
Sure would like to say this apparatus works, but not quite ready to yet. Got a bit more experimenting to do.

My fan is acting up, and it is right in the path of the reflected signal. I wonder if this thing has anything to do with that...

Oh, I almost forgot, last nite there was a massive explosion in a secret (camaflauged) power transforming station - that as far as I can see powers the cell towers on the high rise next to our small building.

The explosion was very loud (not a tire blowing out) and it emitted a brilliant blue-white light (electrical arc). Not sure if this thing had anything to do with it but it is quite a coincidence.

It was so loud I actually ducked my head under the sill of the window - I thought it was a bomb. And I'm not at all jumpy, usually.

Good Morning Ernie

What I have seen with any type of "fixed tuning effective" apparatus, is that when the environment re-synchs into the new pattern, it may take as much as a very slight adjustment every hour for the first day, then about every other hour for the second day, then two or three adjustments day 3, and day 4 maybe 1 adjustment, day 5 not needed, day 6 not needed day 7 a very slight adjustment, then the pattern seems to hold if the stimulus that it is dealing with has remained stable..

If the stimulus is constantly varying then its a matter of "riding the pony", hold on and tweak as needed. When the environment changes cause something has been neutralized, reality has changed just a little bit and slight retunings deal with the changes to keep things in maximum dimensional resonance.

For this book beam dump device to not need re-tuning I believe is due to the very good tuning you did at the outset, and the angles created by the page leaves (the changing angular action resonantly linking to whatever incoming wave is present).. very well done !

I have seen issues with fan bearings and transformers IF they are the source of the stress fields. In other words, the stress inducing fields are flatlined, and the source of the stress is then removed.

So what I think is important, with the transformer being IN-LINE with the cellphone tower.. THEN the cellphone microwave signals were modulating no doubt the structure the transformer is housed in, the fields leaking from the transformer, prbly were acoustic third harmonic 60 cycles (assuming you are living in a 60 cycle power grid) or 180 hz. The guess is the scalar stresses in the building were rapidly released, no doubt the inducer concept behind the stress fields then quantumly cancelled.

In the other thread I have been talking about, the 4-Scenarios, I had mentioned when one removes the opposite flow rapidly, the flows can create a radical release of stored aberration. A slow substitution of opposing flows, sorta bleeds the "battery" down slowly instead of a short circuit and release of the short.. Just technique..

As you were saying, let's chalk it up to mere coincidence :)

Glad to know you are into tech terms too.

Bob

[Ernie Nemeth]

Here's my second attempt. Bigger book (14+ inches on the long side). Some pics to illustrate.

227622276322764

The first pick shows the cutting off the roll. There is the precut template to measure with and the steel ruler to tear along as a guide (works real good.

The next pic shows the longer straight edge (for longer than twelve inches) and the stack of newly cut foil leafs.

The last one shows the finished product alongside its little brother.

Hope this helps. And yes, it seems it does affect biology so be careful with it.

[Bob]

Here's my second attempt. Bigger book (14+ inches on the long side). Some pics to illustrate.

227622276322764

The first pick shows the cutting off the roll. There is the precut template to measure with and the steel ruler to tear along as a guide (works real good.

The next pic shows the longer straight edge (for longer than twelve inches) and the stack of newly cut foil leafs.

The last one shows the finished product alongside its little brother.

Hope this helps. And yes, it seems it does affect biology so be careful with it.

Just a quantum observation Ernie - the tuning you have done has quieted the high frequency noise here too. That's the quantum hologram in action. I can only imagine if 1600 users did the same thing, the forum members online at any one time.. Very Well Done ! and thanks !

Bob

[Ernie Nemeth]

The first book with the multiple consecutive pages of foil seems to need no tuning. Close it and the ringing comes roaring back. Open it (to about 89 degrees) and within minutes the ringing stops. I think the crystal has a lot to do with it, too. The microwaves "squeeze" the crystal that then emits its own correcting wavefront.

The new book I have aimed directly at the cell phone tower on the next building, no idea if it works, though. No more explosions, too bad, I was hoping they'd have to relocate the tower to another building - or come knocking on my door asking if I have any technology in the apartment...

I will go over the proceedure listing to reflect the two types of beam dump - the directional and omni-directional

glad you are feeling the long distance scalar function in your neck of the woods - and you're welcome, thank you!

[Bob]

The first book with the multiple consecutive pages of foil seems to need no tuning. Close it and the ringing comes roaring back. Open it (to about 89 degrees) and within minutes the ringing stops. I think the crystal has a lot to do with it, too. The microwaves "squeeze" the crystal that then emits its own correcting wavefront.

The new book I have aimed directly at the cell phone tower on the next building, no idea if it works, though. No more explosions, too bad, I was hoping they'd have to relocate the tower to another building - or come knocking on my door asking if I have any technology in the apartment...

I will go over the proceedure listing to reflect the two types of beam dump - the directional and omni-directional

glad you are feeling the long distance scalar function in your neck of the woods - and you're welcome, thank you!

Very good report Ernie. The multiple foil book, excellent that it works so well. I never have tried that many foil sheets, to know it deals with nerve issues is fantastic. I would love to hear from others with the "ringing sound" when they are thinking it is tinnitus, maybe it really isn't but is microwave assault. There are countless thousands who need something like that for help. Very well done !

The long-distance effect is ( what I believe is ) a holographic function at the quantum level, the information formation level. If one does a clearing of a very basic issue, it should spread out into the allness matrix, opening doors for others to also use it as a bridging or stepping stone. I am noticing an improvement in audible hearing of subtle sounds too. Maybe that's a side effect of the ringing diminishing.

Bob

[Gekko]

Just a reminder, a piece of aluminum on EACH page of those groups of leaves is needed. Each aluminum foil sheet bounces the signal off the other aluminum foil sheet, and there is the organic material (the paper), separating the metal layers - so that is an ORGONE configuration.



Hi Ernie - I put a single aluminum foil sheet on the inside cover page, then skipped what felt right, 10-14 pages and inserted a toothpick placeholder, then put a single sheet of aluminum foil on the second stack. Inserted a toothpick after about 10-14 pages, then on the next group put a single sheet of aluminum foil. Each bundle has one sheet on it.

Ok, so I'm a bit confused as to whether I did this right or not. I'm assuming that since you only used 10 sheets of foil, there's only one sheet per stack of pages. Which is consistent with my design. I spaced those 10 sheets fairly evenly throughout the book. Now, I'm also assuming that each sheet of foil is 'sandwiched' by several unaltered pages on both sides, making 10 individual 'stacks' of pages. Am I understanding this correctly?

[Bob]

Just a reminder, a piece of aluminum on EACH page of those groups of leaves is needed. Each aluminum foil sheet bounces the signal off the other aluminum foil sheet, and there is the organic material (the paper), separating the metal layers - so that is an ORGONE configuration.



Hi Ernie - I put a single aluminum foil sheet on the inside cover page, then skipped what felt right, 10-14 pages and inserted a toothpick placeholder, then put a single sheet of aluminum foil on the second stack. Inserted a toothpick after about 10-14 pages, then on the next group put a single sheet of aluminum foil. Each bundle has one sheet on it.

Ok, so I'm a bit confused as to whether I did this right or not. I'm assuming that since you only used 10 sheets of foil, there's only one sheet per stack of pages.

Which is consistent with my design. I spaced those 10 sheets fairly evenly throughout the book. Now, I'm also assuming that each sheet of foil is 'sandwiched' by several unaltered pages on both sides, making 10 individual 'stacks' of pages. Am I understanding this correctly?

Thats pretty much it. Depends on the amount of pages in the book. The cookbook I used had 100 pages. So I created ten sections of pages (the insulators), and placed on the outside of each stack (keeping the aluminum sheet free in air) at the start of each stack.

I can also visualize a design of 5 sheets of paper on each side too, the aluminum being on an inside sheet of the stack, which is what I assume you did?

Ernie may be able to explain a bit more of what he did on his first design

The old Reich data said to use glass wool.. To me glass wool is fiberglass that is used to insulate buildings from cold (or heat). The point I believe is he wanted a good dielectric to have the metal coating attached. I suppose if one were to look at it at a very small atomic level, charge wise this would tend to pick up microwave energy of multiple frequencies, couple the electric field into the dielectric and short it out. thereby cancelling any electrical charges.

That Ernie added an amythest crystal is a great concept. Love those points, very soothing. The discussion was about trying to deal with the "return to sender" energy which should be created when the device is tuned right (adjusting the spacing and angles of the book being opened). The Key to the TUNING was being able to note inside of one-self when a desired bioactive effect happens.

I went for exposed conductor (an aluminum sheet) with an air gap to have as much microwave pickup and looked at the "beam dump effect" (the ever narrowing gap as the pages got to the center book binding) bouncing the incoming microwave according to its frequency (or wavelength) at the correct spot down the throat of the book leaves. I wanted to have as much exposed charge on the aluminum, so I left air gap, instead of insulating the aluminum sheets with paper on each side. BUT I think maybe things could be optimized.

In my design: Looking at the electrical structure, on one side of the slanted cavity (looking into the book) the microwave beam would be bouncing on metal, and the other side of the cavity to get to the metal is going thru the paper leaves. The paper is the organic component in which the "return to sender" field is created.

So the energy bounce would be (lets say looking leftwards) one metal - one insulator - one metal. The only difference between the designs tested to date seems to be the thickness of the cavity gap between the metal conductors.

Of course that thickness difference in the pages per group would change the bandwidth and tuning. This could be optimized as to the wavelengths we are dealing with.

Possibly someone could do a test with some sheets of paper and some aluminum foil on top of both sides to see where the resonance frequencies are, and what bioeffects are noted with different thicknesses of paper between the two metal layers. Granted it doesn't have the slant angle of the groups, but it would give some good indication of bio-field effect I believe.

I'd love for somebody with an anechoic chamber to put this thing in it, and sweep it with a spectrum analyzer and plot the curve, absorption and impedance. That would allow for optimizing and of course fully analyzing why the first design you did is so effective.

We are combining Reich's work on orgonne, Microwave absorber and antenna design (corner reflector for gain), optics beam dump concepts, and psychotronics for biofield intention. (and keeping it practically nil for the cost so that anyone can do it). I think its worth the experimentation.

Ernie can you offer Gekko some pointers here?

Bob

[Bob]

Hi Folks,

I will be posting shortly, some more designs in a little bit, of a different type of hand held tuner, that is portable, practically ZERO COST to produce (and has the equivalent "power" of 1000$ commercial systems). Where there can be experimentation with it, is to apply the different types of RUNES designs with metallic paint (silver preferably obtainable as a printed circuit repair pen), or glued on aluminum foil symbols.

Again its a fun simple project to develop tools and solutions to help ourselves deal with the incoming microwave assaults.

Bob

PS - OK. It's online now in the next post to this one. Because the back Reflector Disk can be easily removed and changed out with different disks with different RUNES on it, it should provide for many hours of useful experimentation. Build as many as you want but please know this is not for sales, not for making money on. This is about helping.

[Bob]

22786 DIXIE CUP TUNER

Howdy Folks :cool: , here is an ultra simple personal tool that one can build. I call it the Dixie Tuner as it uses a Dixie Cup (the two ounce size) some cardboard cutouts, and a new #2 Pencil and one thumbtack.

What you should have also is a hot glue gun (that's the easiest way to glue on home projects, decorations and things, and uses hot-melted polyethylene plastic rods as the "glue". The polyethylene is the type of material you see in sandwich baggies, that clear really stretchable stuff.

If you have an exacto knife you can cut out the RUNE design called Wunjo - or the rune for "perfection", the ideal manifestation of the "correct wishing". The RUNE symbol is painted on with conductive silver paint, or gold paint (which really is brass), or can be a cut-out from aluminum foil. The key is for it to be conductive.

The scales shown in the pix are relative and there is a pretty good indication of what is close to ideal.

The big thing for the "activation" of >100% dimensional coupling is to set the Dixie cup's inside sub-resonator disk optimally. What one wants is a 5/8 positioning relationship between where the bottom of the Dixie cup contacts the Pencil. Cut the hole tight in the bottom of the Dixie cup and in the sub-resonator disk. You don't want this to just slide around by itself when you move it around - you want it to remain fixed, but allow for retuning and optimization as needed.

When you get the sub-reflector disk in the optimum bio-active position, add a few drops of hot glue to the edges of the Dixie-cup to hold it in pace. No need to add a lot of hot-glue cause you don't want to upset the bio-active balance point you achieved.

Make the back disk, the MAIN REFLECTOR a little bit bigger than the large opening size of the Dixie cup. On this reflector place or pen in the Wunjo Rune. It must be made with a conductive material, such as silver ink. These ink pens are available in hobby shops, or electronics stores. If that can't be found one can use conductive silver paint in bottle form, or gold paint (brass) or copper paint. My best results were from using a silver circuit board repair pen that contained pure silver powder.

Tuning - hold the thought and move the Dixie cup ever so slightly back and forth to "brighten up" the thought. Adjust as "reality quantumly changes" and as needed.

I find a little stand can be made (non-conductive), made out of toothpicks that allows the Dixie cup to be supported by the toothpick stand. The attachment of the toothpicks to the Dixie cup should be exactly under where the sub-reflector disk was glued in place.

We do not want to upset the geometry of the system, and the ratios need to be pretty precise. This works on background microwave energy (7.35 centimeter wavelength cosmic background energy or zeropoint flux of the universe). If you want you can google: http://en.wikipedia.org/wiki/Discovery_of_cosmic_microwave_background_radiation

Bob

[Bob]

Howdy Folks - "AUM" design

Here is a slightly different Reflector Disk Design for the Dixie Tuner.

This uses the AUM symbology. (pronounced ohhmmmmmm).. but this is the representation and the significance of the symbology.

22790


Explanation:

22789

Enjoy,

Bob

http://www.hindunet.org/aum/

[Bob]

One more interesting RUNE pattern
Algiz - The strong protective side in the unconscious; the influence which will protect you..

Y with a continuation of the vertical line upwards - like the ELK horns. Strong and protective.


ALGIZ (also called Elhaz) is a powerful rune, because it represents the divine might of the universe. The white elk was a symbol to the Norse of divine blessing.

Seems to me then if we use the Dixie Tuner and have the reflector set to Algiz, we would have the psionic equivalent of the Divine with us. I will be eager to hear people's uses of this Rune on the Dixie Tuner.

Bob

22811

22810

[Chanlo23]

I have also seen a reflector disk created with the Hebrew letters יַהְוֶה for YHVH used as a 'rune'.

[Bob]

I have also seen a reflector disk created with the Hebrew letters יַהְוֶה for YHVH used as a 'rune'.

Hia Chanlo23

Can you draw up one of the circles (the back Reflector Disk) and upload it for us all to see (and try?) thanks

BobD

[PurpleLama]

http://myjudaism.files.wordpress.com/2011/04/yhwh.jpg

Here are the Hebrew letters Chanlo is referring to, Yahweh, the Father, also one might try:

http://www.byzant.com/mystical/symbols/Images/yod-heh-shin-vav-heh.gif

which is Yehoshevah, the Son.

Also, this might be most effective, for us *ahem* evil magicians ;) (drawn this particular way)

http://www.wisdomsdoor.com/wb/images/hwb-lbrh-1.gif continuing with a clockwise circle from the "finish" point.

[Bob]

http://myjudaism.files.wordpress.com/2011/04/yhwh.jpg

Here are the Hebrew letters Chanlo is referring to, Yahweh, the Father, also one might try:

http://www.byzant.com/mystical/symbols/Images/yod-heh-shin-vav-heh.gif

which is Yehoshevah, the Son.

Also, this might be most effective, for us *ahem* evil magicians ;) (drawn this particular way)

http://www.wisdomsdoor.com/wb/images/hwb-lbrh-1.gif continuing with a clockwise circle from the "finish" point.

Hi Reilly - would you write the flame letters on the Reflector disk, Clockwise or counter clockwise, and or would you use ONE set of letters, (the name) or 4 sets of letters? The Star Geometry looks like another symbol that can be used, agree..

Bob

¤=[Post Update]=¤



http://myjudaism.files.wordpress.com/2011/04/yhwh.jpg

Also, this might be most effective, for us *ahem* evil magicians ;) (drawn this particular way)

http://www.wisdomsdoor.com/wb/images/hwb-lbrh-1.gif continuing with a clockwise circle from the "finish" point.

Hi Reilly - would you write the flame letters on the Reflector disk, Clockwise or counter clockwise, and or would you use ONE set of letters, (the name) or 4 sets of letters? The Star Geometry looks like another symbol that can be used, agree..

Bob

PS - I have an active Holographic Waveform Generator system, where I actually use the STAR geometry as you have drawn, and in Frequency Space recreate the holographic 4D effect. Actively, not passively, very interesting effect. B.

[PurpleLama]

A pentagram drawn clockwise is a banishing pentagram, so it seems logical that it would be the best to use. The hebrew letters in red, I would suggest placing in total in four places around the circular piece in the dixie tuner. The letters in gold, I would suggest in starting with the first (left-most) letter and starting at the bottom left point of the star going clockwise around the circle. Lemme see if I can whip one up real quick and get it posted before I leave work....22839

[Bob]

Brilliant ! Reilly :)

High Majik ! tnx.

The Dixie Tuner is such a great universal apparatus - and again so simple to construct.

The option to put on patterns on the reflector disk act as "dimensional templates" as I understand the term, modifying frequency space to access according to the reflector pattern.

Change the reflector disk or make multiple for different concepts to be worked with.

Bob

[Nanoo Nanoo]

Hello People of earth , i have had chats with Bobd and he has agreed to put my thread here as a suppliment to this infomation. It is simple tech to redusing you as a target. It explains a little about what " they " may use as locators to triangulate you.

I hope you find it useful.

http://projectavalon.net/forum4/showthread.php?56724-Weapons-of-Mass-Disruption-tech-to-reduce-the-target.

Naniu

[Chanlo23]

"Bobd: Can you draw up one of the circles (the back Reflector Disk) and upload it for us all to see (and try?) thanks"

Hia,

Love to do so BobD - but I am not yet considered a member with sufficient privs to create an album here. I had made up several using your template, but I have no way to upload them. Perhaps I could send them to you offline?

Chanlo23

[Bob]

"Bobd: Can you draw up one of the circles (the back Reflector Disk) and upload it for us all to see (and try?) thanks"

Hia,

Love to do so BobD - but I am not yet considered a member with sufficient privs to create an album here. I had made up several using your template, but I have no way to upload them. Perhaps I could send them to you offline?

Chanlo23

OK - possibly ask Christine if you have any way to create an album with pix? If not sending it to me and I can put it in my attachment folder.

tnx.

Bob

[soleil]

hey bobd, is there any limit to how many books you have set up in a house for example? i'm going to give this a go this week and will report on how it goes. :)

it is the futhark runes which is what you guys are playing with, i think its a great idea to involve runes!!!
also, the pentagram is part of sacred geometry, and a pentacle, is a pentagram in a circle (literally combining the names), it is the inverted pentagram that has the negative energy associated with it.

http://www.badalijewelry.com/runekey.htm

[Bob]

hey bobd, is there any limit to how many books you have set up in a house for example? i'm going to give this a go this week and will report on how it goes. :)

it is the futhark runes which is what you guys are playing with, i think its a great idea to involve runes!!!
also, the pentagram is part of sacred geometry, and a pentacle, is a pentagram in a circle (literally combining the names), it is the inverted pentagram that has the negative energy associated with it.

http://www.badalijewelry.com/runekey.htm

Howdy Sway - thanks for taking a look at it.

I have three of the book, and I don't think there is any limit. Different books (i am assuming the thickness and size has something to do with it, and how the conductive foil is placed is all part of the tuning from what we can tell). For me the big thing was to try the hand mudras or the hand towards the forehead to see if you can sense the changes in the bio-field nodes. I've measured the wavelengths too, and anyone can do that simply noting the distance between the nodes (like max sensation to max sensation - that would be one full wavelength)... Then there is a simple conversion on the internet (online wavelength calculator) where you can get the actual frequency which is a microwave length.

I love the runes and I think maybe some rock glyphs may be interesting to try. Knowing the significances it seems to me is very important when working with different "metaphysics(?)" - is that the right word to bridge this science and spirituality? Maybe we need a new word, dunno..

I have one of the 5 point STAR diagrams converted to 4D active hologram which is pretty neat. I think for working with these designs without a need for a computer and nil cost, its a lot of fun and seems to me one can get some great clearing of outside interference coming in bothering one's consciousness and bod.

A few folks tried pointing in different locations, finding pointing at away or towards had different characteristics.

I haven't seen any place around which isn't getting bombarded from microwave from satellites, PLUS microwave from cell towers.. Some folks found the wireless routers were part of the metaphysical noise.

Lot's to try -- enjoy and if you have some new insights to share please do :)

Thanks very kindly,

Bob

[Chanlo23]

I finally read how to attach an image to a post! I copied one of your disks and used it as a template to illustrate the use of a monad, the infinity symbol, and the yhvh.

[wolf_rt]

I knocked myself up a book reflector thing... i was short on tape, so i only used little tabs to hold the al-foil and page sections together.

I used a 24cm by 12cm book... a bit small i think, but better than nothing. I think my mom has some old encyclopedias that might be more suitable.

I broke it into 10 sections (11 plates) of 18 pages each (3mm)

My edges weren't exactly square with the pages, but i attempted to fit the 'front edge' as closely as possible but the top and bottom edges are a little wonky. the foil extends right to the 'back' (spine side) of each page though, so the measurement is a pretty consistent 3mm here.

I set it up with a 1.5 inch spacing which gave me around 110 degrees, and pointed it out the window in what i felt was a likely spot.

Honestly the 'atmosphere' did seem to clear a bit when i set it up....

5 min later i closed the spacing to 1 inch at 90deg and added a back pane on the spine which was pointing directly toward me. I felt that this possibly had a different impact but not necessarily better... I think i will make a small one and a large one for the room also.

I have a friend who is pretty sensitive to these sort of energies, and can do the ball of energy thing in his hands... I think i'll ask his opinion on the placement also

[Bob]

reading the WiFy reference u mentioned on your thread also makes sense.

Folks have been reporting that cell-towers too are a source of annoyance..

What I find is the worst comes from the bouncing around from the towers fields.. the waves get in, then reflect off manythings, and when one moves around more reflections so more mixed fields happen..

I use 3 of the books here to deal with the 3 major inputs of microwaves..

I've also retweaked, as you did, repositioned.. as needed as things change.

One of the most sensitive people I met would jump when the little spark that happened when a light switch was turned on and off, and of course her house was positioned right in the flight path of Boston International Airport - all the radars from the planes, radar altimeters would set her off, poor woman.. Her reason for sensitivity we all suspected was from a type of spinal damage she had from a nervous system issue..

[Bob]

:wizard:

doing the

:bump:

as it seems many more folks have been talking about concerns about microwave beaming, or nasty buzzing or so forth, thinking it's RFID stuff - its not, its microwaves from many sources turning into scalar waves in the body from multi-path reflections. What concerns me is people may be becoming more sensitive, maybe it's the time of year, flu bugs all that.. but maybe try the solutions talked about in this thread. I know it's helped here.

maybe let's bump this up for a bit to keep it on top so we can help with some solutions.. :)


:grouphug:

[doodah]

Thank you, Bobd, for all this great information. I'm going to make a book, or several, in the hopes that they can clear the land around me so that my honeybees will come back. I'll have to wait for spring to verify if it worked, but in the meantime I'm sure there will be positive effects I'll notice!

Cheers!

[Bob]

(dooDah may post her results, but I don't think she would mind me saying that she did get some benefit from this in a nice unexpected way :) - she built TWO of these and started using them)

:bump2:

[Limor Wolf]

My own attempt in September 2013, thanks Bobd.

[Bob]

Hi Limor - thanks for the pix

hint - separate the pages better with tape to hold them in place. More rigid the better. Moving the pages (and book) into the quietest resultant effect, then tape to hold in place.

I have zero whistling here today, did have to briefly adjust the books ( i have a couple being used ). Some other folks have posted in other forum threads some nasty whistling happening, like tinnitus recently.. My suggestion is try making the book and tuning it to find the relief point(s).

I can point out that during weather events, or "war" events, satellites are moved which means that the microwave to the ground illumination pattern changes.

Cellphone towers also adjust their power levels under varying conditions, such as weather and load (traffic going thru the data system)..

Getting the geometry set right, and the "beam dump" will suck up the bio-active fields helping one to get a lot of relief..

[Limor Wolf]

Hey Bobd, thanks for your comment and corrections. I am glad that it helped Doodah and others.

Nowdays, I find an interest in the built-in technology we all have inside to contradict frequencies.
I am not sure if this is the right thread to paste an excerpt from the 'Montauk Project' book, but I think this might be of interest as well.


"They experimented by running the transmitter at different pulse widths, different pulse rates, and different frquencies. They tried everything they could think of, just plain empirical experimentation. They just wanted to see what happened to see what would happen to the person in the chair if he was bombarded by "x" frequency, pulse,etc...

Duncan (the man in the chair. i.e Limor) sustained serious brain and tissue damage as a result of a continous 100 kilowatts power at a distance of about 100 yards. The waves baked his brain and chest."

".. Previous research in or about 1986 indicated that Duncan was actually brain dead.. Brain dead individuals suffer from a lack of oxygen to the cerebrum.."

"I asked a neurologist with whom I was friendly with, and he said it was definitely possible that some one could be brain dead and yet be walking around. He cited some post mortems done on people in England and in the U.S, whose brains had unusual coatings inside the skull. The coating were about a millimiter thick.
More interesting yet was a case he'd encountered about ten years ago. He took out a group of X-rays of a normal human being and showed me the red areas. He also indicated blue areas but told me they were areas that didn't require much oxygen. Then he put up another x-ray where the entire brain was blue. This meant that the person was alive and was walking around like a normal human except he has memory loss problems from it. He was essentialy brain dead and the brain was using just enough oxygen to keep it from rotting. I noticed the corner of the x-ray and was surprised to see Duncan's name. Based upon this information, Duncan is indeed brain dead.

I asked the doctor for an explanation, but he wasn't sure. He could only offer a theoretical conclusion based upon psychic powers. He said that his profession recognized the existance of psychic phenomena but did not understand it.

At this point, we learned that the only reason Duncan is alive today is due to his strong psychic aptitude. The psychic part of his mind takes over the physical part of his mind and runs the body. His brain stem is alive; his spinal chord is alive; his body is alive, but his actual higher brain is dead. His psychic energy runs the body through brain stem."

However, don't try this at home.

[doodah]

(dooDah may post her results, but I don't think she would mind me saying that she did get some benefit from this in a nice unexpected way :) - she built TWO of these and started using them)

:bump2:

:) Thanks, Bobd, I don't mind. I built a big one using a 3-ring binder, which has a metal strip on the inside of the spine with metal rings that snap open so you can put in 3-hole-punched paper. I realized I didn't want to use any of my books for this project, so this binder idea gave me an opportunity to create a book and recycle my used computer paper at the same time. I ended up with 12 bunches of 10 sheets of paper. The bunches were fat enough that they touched at the back near the metal strip. When I taped the aluminum sheet to the top of each bunch, I taped around all the edges, including all the paper pages, so that the bunches were less floppy. Then I did the tuning mathematically, laying out a diagram using 88 degrees for the opening of the book, with the bunches equally spaced. I found it rather bothersome that each time I moved the book, I would lose the spacing, so I made an accordian-pleated strip of paper that I draped across the top of the bunches to keep the spacing. This book I placed facing south, as there is a big mountain in that direction that has a bunch of TV broadcast towers on it.

The second book I made is rather small (I have a tiny hobbit house and not much space.) This one has 10 bunches of 10 sheets, all taped and spaced as the big one. I placed this one facing my portable phone base, with the spine toward where I sit to work on computer. On the outside of the wall where the phone sits is the electrical box with its *dumb meter* broadcasting all the time. I was hoping to kill two birds with one stone with this placement.

Within a day of placing the first book, background ringing in the ears diminished (but it has not completely disappeared). Within a day of placing the second book, I got some unexpected results -- my sinuses cleared up. How this relates to anything, I really don't understand, but there you have it. When my sinuses opened up it was such a surprising feeling. I really had not realized that they must have been slightly clogged up for quite a while. They are still unclogged several weeks later.

Now I have to make a DixieTuner when I get some Dixie cups!

Happy Holidays to everyone!

[Bob]

thank you DooDah for sharing the added benefits.

I like that you came up with a method of using a 3 ring binder with a spacer taped (?) in to hold the pages in the desired spacing.. that spacing is what enables the angular effect (narrower at the binding section), and (wider at the mouth opening)..

If you have a way to post a picture that would be great - thanks for checking in and happy holidays to you !

[Bob]

Hey Bobd, thanks for your comment and corrections. I am glad that it helped Doodah and others.

Nowdays, I find an interest in the built-in technology we all have inside to contradict frequencies.
I am not sure if this is the right thread to paste an excerpt from the 'Montauk Project' book, but I think this might be of interest as well.[...]

Just to streamline the post a bit Limor, besides contradicting frequencies, I think we have ways to augment frequencies, which could be of benefit.

in this post:
http://projectavalon.net/forum4/showthread.php?62967-Beamed-Easy-way-to-get-some-relief-COUNTER-MEASURES&p=732506&viewfull=1#post732506

Chanlo and I were talking about the proper types of TUNING (pattern amplification/selection) - these are some of the geometries chosen as "amplifier/selection" templates..

A template is like a specific window in which to access something.

When we simply put on a filter on eyeglasses so that we can only see certain wavelengths of light, things look different.. If we have a way with the template filters in front of our eyes to convert frequencies that are invisible, and make them visible, we may then have a way to perceive, "patterns/frequencies" which were being masked out by overwhelming "noise" (other signals).

I tend to think the buzzing/whistling sounds act like distraction noise that tends to overwhelm the nervous system, making it harder to "listen to" or tune into that which is being over-ridden by the noise. I think shutting off that noise may help us to see/hear or experience what subtle items are being masked over..

In the Dixie Cup Tuner, I tend to like it to a "magic wand" specifically tuned by the user/operator to allow for the operator/user to have more access to something..

For instance, if one wanted a better connection with http://myjudaism.files.wordpress.com/2011/04/yhwh.jpg it is my belief that one can go through many different meditations possibly establish a representative "energy temple" altar and turn off internal dialog, get into each of the flame letters conceptually and gain access..

This geometry on the dixie tuner device, http://projectavalon.net/forum4/attachment.php?attachmentid=22919&stc=1&d=1379615213 was setup to be the template pattern which is amplified by moving the dixie cup device on the "dielectric rod" antenna, (the pencil)..

My feeling is that the flame letters by themselves are very strong frequency space tuners, as that I believe was the purpose, to have a way to write, evoke and express frequency space concepts detailing high spiritual reality.. and allow one trained in the understandings to evoke the concepts behind the flame letters...

Do you have any experience with that that you can talk about?



(this is the link and image to the dixie cup frequency tuner) http://projectavalon.net/forum4/showthread.php?62967-Beamed-Easy-way-to-get-some-relief-COUNTER-MEASURES&p=728431&viewfull=1#post728431


http://projectavalon.net/forum4/attachment.php?attachmentid=22786&d=1378940870

a point about the dixie cup tuner.. there is no reason to have all the complex apparatus as defined in the Montauk book.. techy types in my experience like to over-do-it with excessive drama cause the flashing lights bells and whistles are so much like the movies hollywood puts out.. An actual Shaman fully adept, functional and powerful only needs the concepts, the feelings, a focused mind and a few assorted augmenting "props" to assist in holding the "mind space concept"... The tools act as the mind-physical interface, the "bridge" between the worlds... the tools i have presented are the simplest low-tech, basic concept devices, similar to a shaman's tools in a medicine bag or bundle.. what i have offered is a universal tweak as needed to do the job at hand.. peace

[RunningDeer]

Thank you, Bobd :wave:




http://i1262.photobucket.com/albums/ii610/WhiteCrowBlackDeer/image4_zps2650139b.jpg

http://i1262.photobucket.com/albums/ii610/WhiteCrowBlackDeer/image5_zpse3c7b6e8.jpg

http://i1262.photobucket.com/albums/ii610/WhiteCrowBlackDeer/image3_zpsbfea76a9.jpg

http://i1262.photobucket.com/albums/ii610/WhiteCrowBlackDeer/image1_zps6dec3b12.jpg

http://i1262.photobucket.com/albums/ii610/WhiteCrowBlackDeer/image2_zpsc3d66373.jpg

[doodah]

Okay, Bobd, here are photos of my first attempts. Your critique is welcome. I don't know if I've done this right.

I'll do the small book first since the spacers I've added are easier to see. I found that tape and I don't get along so well. My first attempts to hold the pages in place with packing tape led to a mess of tape sticking everywhere I didn't want it to. I also found moving the book and readjusting the tuning difficult with the tape, so I substituted paper strips.

I have a very small house with almost no surface area available to set these books on. That has been a factor in placing them as I have done.


24302 24303

[doodah]

Now for the big book made from a 3-ring binder.


24307 24308

24309 24310


This book sits in the only window I have available for starting plants for the garden. I'll have to figure out how to keep the book there when the window becomes filled with seedlings.

[GreenGuy]

Many thanks to all who shared their terrific photos! I have been thinking of this since coming across this thread last night, and today I found rolls of heavy-duty aluminum foil on sale for $1.99. I bought 2 rolls.

[Bob]

Now for the big book made from a 3-ring binder.

[...]
This book sits in the only window I have available for starting plants for the garden. I'll have to figure out how to keep the book there when the window becomes filled with seedlings.

Beautiful design ! Brilliant DooDah !

[Bob]

Okay, Bobd, here are photos of my first attempts. Your critique is welcome. I don't know if I've done this right.

I'll do the small book first since the spacers I've added are easier to see. I found that tape and I don't get along so well. My first attempts to hold the pages in place with packing tape led to a mess of tape sticking everywhere I didn't want it to. I also found moving the book and readjusting the tuning difficult with the tape, so I substituted paper strips.

I have a very small house with almost no surface area available to set these books on. That has been a factor in placing them as I have done.


24302 24303

Superb :) I like that you have made the spacing very uniform and kept it from deviating based on the spacers you've come up with.

I have wondered on the thickness of the "insulator" (the paper sheets per bundle).. what the optimum thickness would be.. I have by default assumed 10 sheets would be good assuming a 100 sheet book or so.. so that at some point may be good for experimenting.

[doodah]

Thanks, Bob. I personally don't have any feeling about the bundle thickness issue. Ten seemed good.

More importantly for me, I really don't like moving the books once they have been placed. It's not because it's difficult to move them, it's more that I feel they are in the "right" places, angled just so, and I don't like disturbing that.

[Bob]

I think the most interesting point i hear there is "when it feels right, it feels right.." and that shouldn't be changed..

A couple things to note I have seen since about 1979 when I first got into that type of tuning mechanism..

Background "reality" will start to change slightly, when you have made a substantial correction.. The more radical the correction, the faster the change becomes obvious.

These systems allow for "fixing" and keeping balanced properly one's space.

People do it sometimes with crystals, candles, arranging the pictures on the wall, the plants in the room, maybe the furniture..

Folks build buildings "energetically" to blend with the natural planetary energies..

But we have a LOT of human energies, machine energies - energies from satellites - microwave towers, cellphone towers, wireless routers, wireless phones.. every one of those field generators upsets a natural balance..

To have a set of tools that cost basically a few bux in materials, some time, to be able to work with, the "assault", fix it.. that's a godsend for a lot of people.

I say learn the energies, learn the tuning, work with the tools. I can offer pointers as needed to assist a bit, maybe find a few more ah-ha's to share with all..

So, be sure to very slightly retune, slightly move left or right, or move rotationally if needed, when conditions change.

As you are also adjusting and reshaping the damaged reality (one does this in a good meditation but why "be a machine onself, dohh").

I realized back in the 60's meditation is a great way, His Holiness mentioned this to me in Hawaii in the 90's, when in doubt meditate, he said people just can't grasp a technology (i say they can't grasp cause they been trained to NOT grasp), he said meditate. I said, when one knows the energy that one is meditating for, one can build a tool to assist... If it is a breath or a posture, or a bringing of something into one's space to help find the stillness and open the doors.. well those are tools.

[Shezbeth]

Excellent thread Bobd! Just perusing the material I find my mind want to wander into various ideas/techniques/configurations to manifest the technology you refer to. I especially like the reference to Orgone configurations, as that helps me to jump further into the energies at play (insomuch as I am able).

My one question (I'm sure I'll have more in a week or so of experimentation, but one thing at a time ^_~)

I see that the overall purpose of the book-device is to absorb and beam back (at amplification) unwanted external energies. Could one use such a device (or multiple in a configuration) to amplify and resonate (in a given area) the energies already present/produced? If one's surroundings, objects, and self naturally produce wanted energies and effects, could these be used in a particular array to saturate the environment?

Apologies if that's what the reflector disk is about, I'll admit I started skimming at that point.

[Bob]

Excellent thread Bobd! Just perusing the material I find my mind want to wander into various ideas/techniques/configurations to manifest the technology you refer to. I especially like the reference to Orgone configurations, as that helps me to jump further into the energies at play (insomuch as I am able).

My one question (I'm sure I'll have more in a week or so of experimentation, but one thing at a time ^_~)

I see that the overall purpose of the book-device is to absorb and beam back (at amplification) unwanted external energies. Could one use such a device (or multiple in a configuration) to amplify and resonate (in a given area) the energies already present/produced? If one's surroundings, objects, and self naturally produce wanted energies and effects, could these be used in a particular array to saturate the environment?

Apologies if that's what the reflector disk is about, I'll admit I started skimming at that point.

The beam dump "booK' is pretty good for helping to quiet the environment, to tune things to get more calm stillness, a working "feel-good". At times multiple books may be needed if there are multiple sources of interference coming into a room for instance. Satellite is particularly nasty coming in from above, microwave towers and cellphone towers, even wireless routers are sources of those short wave microwave signals. Return to sender is one feature. This design is in higher frequencies used to absorb for instance laser light (acts like a beam dump), and at lower frequencies acts like a way to absorb microwave fields. There is a direct tie in to microwave fields and life, to organic matter, even water has a microwave resonance.. So even without microwave assault from human made energy sources (machines), the earth itself is rich in natural background (microwave) energy..

That energy allowed for the ancients, the shaman to work with a real physical energy, and create artifacts which nullified, or augmented the background energies. My belief is the Hebrew Flame letters are a language of Energy Space interaction, the right "flame letter words", pronounced and excited properly create the desired "magic" result. There is a physics to the metaphysics in other words, and it is based on geometry (resonating microwave fields in structure), and interaction of those fields..

The dixie cup tuner uses a rod like a wand, a pre-tuned "reflector" that acts like a lens/filter, to help in pre-tuning a concept.. Moving the dixie cup allows for resonating the thought, the geometry.. Technically it is all working on microwaves and reflections of microwaves through tuned geometry.. Dixie cup tuner would be for getting an augmented effect, tuning into the natural microwave. If one had a shielded "repaired" space with the book beam dump, then used the dixie cup tuner, one would have the capacity for an easily adjusted personal energetic space, for virtually nil cost.

[Bob]

Early on Ernie talked about some of the effects that can happen when the interference source has been identified, and the "return to sender" concept is applied.

The book device, (the "beam dump") cancels out ONE flow of an energy system that is being built up.

The terminals are in this example, SENDER and RECEIVER (the person or environment being attacked).

When TWO FLOWS are in opposition to each other, MASS builds up, or stress builds up.. If it is a person that is the receiver, a person under such bombardment stress continues to blow up, like a balloon, until he or she "pops", flips out, gets sick or starts to lash out assaulting others. Those manifestations can be from nasty back aches, that never end, never are curable, or never ending headaches, blurred vision, unexplained body aches, and burning or screaming types of assaults that never seem to go away... ALL that manifestation comes from the RECEIVER (the person being beamed at) not getting rid of the assault.

Ernie described to me, he identified, a transformer and a cellphone tower all interacting, sending the obnoxious field through the microwaves (the cell frequencies) into his home. And he was absorbing them, getting sicker and more stressed out.

So he tried the "book" (the beamdump) tuned it for good feelings (he cancelled out the assault flow), and the transformer EXPLODED at nite, the flow stopped, cleared completely (returned to sender all that stress).

Of course there is a more graceful method of tuning, not needing the sender to "blow up" by its own hand.. Ernie didn't whack the sender, Ernie didn't cause the transformer to explode, but what he did do, was experience a fact of physics, that removing the "binding energy" from a stuck flow can result in the discharge of the stored up energy.

That stored up energy was manifesting IN himself, and IN his environment. Not clearing that, and one exhibits the symptoms of stuck flows..

USE THE BOOK, tune it properly.

-- best to us all :)

Bob

[TrumanCash]

I haven't made my microwave black body absorber yet, but I would like to know if that is all one needs to counteract the high frequencies in the environment or does it help to also have other devices such as Qlink (http://www.qlinkproducts.com/Scripts/default.asp) or Graham-Stetzer EMF filters (http://store.emfsolutions.ca/categories/graham-stetzer-meters-filters-power-bars.html?sort=priceasc)?

Also, would it also be helpful to have a Graham-Stetzer microsurge meter to measure dirty electricity?

Thanks,
Truman

[Bob]

I haven't made my microwave black body absorber yet, but I would like to know if that is all one needs to counteract the high frequencies in the environment or does it help to also have other devices such as Qlink (http://www.qlinkproducts.com/Scripts/default.asp) or Graham-Stetzer EMF filters (http://store.emfsolutions.ca/categories/graham-stetzer-meters-filters-power-bars.html?sort=priceasc)?

Also, would it also be helpful to have a Graham-Stetzer microsurge meter to measure dirty electricity?
Thanks,
Truman

Hi Truman -

The ability to monitor for power line fluctuations (dirty power) or microwave assault (a wide band spectrum analyzer would be better), or even a way to monitor for ULF frequencies, or ELF frequencies would be good for a case study.

I do recall putting a monitoring scope on the powerline and watching the control signals, strange modulations happening. Let me get into the mechanics of what happens, what goes on with the assaults...

The bioactive effects from these assaults are from the scalar component which manifests itself in the tissues, in structures which are dielectrics. Scalar stress creates an assault and disruption of biological patterns.

When numerous studies were done about minimal levels of healthy verses unhealthy microwaves or electrical or electromagnetic fields, the health organizations conveniently IGNORED the scalar component, of what happens when there are REFLECTIONS plus DIRECT WAVES... The scalars come when the two wave fronts from different directions interact and then start to create assault.. It happens thousands of times lesser level than the measurements on direct wave assault.. SO that is conveniently pushed under the rug, and people continue to suffer.

The concept behind the beam dump is to get the angle set just right and the spacing set just right, both of which allows one to create a pattern which neutralizes the incoming, allows for the quantum holographic concept of "return the scalar assault to sender", and as a side effect allows the background normal microwave fields from the environment, to be set correctly to be a supportive pattern.

Creating numbers of these beam dumps even when one is not being bombarded by cell towers, cellphones, wireless routers, wireless computers, wireless smart meters... allows one to tune for the best feeling. That is amazing, getting support that way. I call it an ideal form of Feng Shui..

I have seen the sticky labels with the patterns on them.. Considering the size of the books is designed to tune in to the assault wavelengths, and allow you to personally tune for the desired feeling, I find it better and more cost effective than buying over the counter pre-made apparatus. I am a strong believer of tune for one's personal situation.. Tuning means you take control of your own space in my book... not assuming that a pre-made product generically will fix all that is..

Bob

[Nanoo Nanoo]

Hey Bob ,

what do you trhink of these little beauties ?

http://www.signalblockerjammers.com/6-antenna-adjustable-high-power-desktop-cell-phone-wifi-rf-jammer-wj015-p-473.html

I have one similar to this on a timer that goes on between 3 and 4 am every day .. since then i have been sleeping right through ... no more emf bombing

15 watt output gives an LOS of 50 m , takes out wifi , cell , lojack etc .. you can actually feel the difference

N

[Nanook]

Beamed? I'd think if this phenomena were real there would be double-blind studies done where people who are sensitive are interrogated as to whether or not they are being affected by microwaves controlled by a third party, while a researcher not aware of the status of the microwaves and not themselves sensitive notes their reaction, and then after the fact compares the results to the actual on/off status of a microwave source.

I grew up two blocks away from a 100kw FM transmitter and a block from a 40kw FM transmitter. You could get miniature Christmas lights to glow without being plugged in. Other than being a bit warmer at night, I never noticed any response so I guess I'm not sensitive.

I can understand how someone might be effected by really high power sources like military multi-megawatt RADAR installations or multi-megawatt UHF television transmitters, but a 100 watt source 22,500 miles up doesn't create much signal at the ground, that's why you need a dish antenna and very quiet receives to receive the signals.

[TrumanCash]

I haven't made my microwave black body absorber yet, but I would like to know if that is all one needs to counteract the high frequencies in the environment or does it help to also have other devices such as Qlink (http://www.qlinkproducts.com/Scripts/default.asp) or Graham-Stetzer EMF filters (http://store.emfsolutions.ca/categories/graham-stetzer-meters-filters-power-bars.html?sort=priceasc)?

Also, would it also be helpful to have a Graham-Stetzer microsurge meter to measure dirty electricity?
Thanks,
Truman

Hi Truman -

The ability to monitor for power line fluctuations (dirty power) or microwave assault (a wide band spectrum analyzer would be better), or even a way to monitor for ULF frequencies, or ELF frequencies would be good for a case study.

I do recall putting a monitoring scope on the powerline and watching the control signals, strange modulations happening. Let me get into the mechanics of what happens, what goes on with the assaults...

The bioactive effects from these assaults are from the scalar component which manifests itself in the tissues, in structures which are dielectrics. Scalar stress creates an assault and disruption of biological patterns.

When numerous studies were done about minimal levels of healthy verses unhealthy microwaves or electrical or electromagnetic fields, the health organizations conveniently IGNORED the scalar component, of what happens when there are REFLECTIONS plus DIRECT WAVES... The scalars come when the two wave fronts from different directions interact and then start to create assault.. It happens thousands of times lesser level than the measurements on direct wave assault.. SO that is conveniently pushed under the rug, and people continue to suffer.

The concept behind the beam dump is to get the angle set just right and the spacing set just right, both of which allows one to create a pattern which neutralizes the incoming, allows for the quantum holographic concept of "return the scalar assault to sender", and as a side effect allows the background normal microwave fields from the environment, to be set correctly to be a supportive pattern.

Creating numbers of these beam dumps even when one is not being bombarded by cell towers, cellphones, wireless routers, wireless computers, wireless smart meters... allows one to tune for the best feeling. That is amazing, getting support that way. I call it an ideal form of Feng Shui..

I have seen the sticky labels with the patterns on them.. Considering the size of the books is designed to tune in to the assault wavelengths, and allow you to personally tune for the desired feeling, I find it better and more cost effective than buying over the counter pre-made apparatus. I am a strong believer of tune for one's personal situation.. Tuning means you take control of your own space in my book... not assuming that a pre-made product generically will fix all that is..

Bob

Thanks for that information and clarification, Bob.

I have heard of smart meters sometimes starting a fire. Is there any chance that the risk of fire is increased by aiming the book at the smart meter?

Thanks,
Truman

[Bob]

[..]

Thanks for that information and clarification, Bob.

I have heard of smart meters sometimes starting a fire. Is there any chance that the risk of fire is increased by aiming the book at the smart meter?

Thanks,
Truman

Thats a good question Truman. I have a smart meter here and have one of the beamdumps nearby pointed to the south where the SPOT-BEAM satellites on the Ku band send their signals to deal with the mutli-path reflections.

As Nanook in an earlier post points out he doesn't apparently believe that signals from RF sources can cause any problems, and of course he is entitled to his opinion (and I would suggest starting a debate thread separately, and leaving this thread for the construction of beam dump devices, and quantum holographic tuners (creation of counter-measures to deal with multi-path induced biological activity from RF) ).

I haven't had any explosion appear, but I haven't tuned for breaking the SmartMeter RF circuit. Ernie did have his explosion of the main power transformer that apparently was feeding the cellphone tower.

[Nanoo Nanoo]

I got a report here thats interesting. I dont believe the results but the frequencies sma rt me tres use are specified in the text.


http://www.smartmeters.vic.gov.au/about-smart-meters/reports-and-consultations/ami-meter-em-field-survey-repor

[Bob]

Hey Bob ,

what do you trhink of these little beauties ?

http://www.signalblockerjammers.com/6-antenna-adjustable-high-power-desktop-cell-phone-wifi-rf-jammer-wj015-p-473.html

I have one similar to this on a timer that goes on between 3 and 4 am every day .. since then i have been sleeping right through ... no more emf bombing

15 watt output gives an LOS of 50 m , takes out wifi , cell , lojack etc .. you can actually feel the difference

N

Hello N :)

That's a really high power set of microwave RF signals you are putting into your place with that apparatus.

I can see what you are attempting to do, and as you say, it gets you a method where your nervous system is no longer being affected by multi-path assault.

By multi-path assault, (I introduced this concept to the Forum in post #95 above), the electro-magnetic wavefronts come in from different directions.

What is ignored conveniently by those who have done RF heating studies, (the typical biological measure saying that a signal's power level is NOT DANGEROUS), is they do not account for interaction in dielectrics (non-conductors) of waves from multiple directions.

Waves in phase add, waves out of phase subtract. These studies ignore what occurs in non-linear mixing, and the whole host of different "new signals" created. Those newly created waves besides exhibiting what Tom Bearden calls "scalar", create new signals fom ULF (ultra low frequency), ELF (extremely low frequency), all the way up to about 1/2 of the carrier frequencies.

Many of those new signals can interact with body rhythms, brain waves, heart rate and evoke (cause) or inhibit nerve ending firing. Those being assaulted may notice unexplainable ticks happening in the nerves, abdomen, legs, neck or a type of palsy may be noted (a weakness).

Bob Becker "The body Electric" gets into the electrical nature of the body and nervous system. He was attacked frequently by nay-sayers, and the Power Industry for pointing out statistically the damages observed. What he didn't get into was that multi-path effects are being the primary responsibility for bio-activity.

What is ignored by those RF heating tests, is what happens to a nervous system which is setup to perceive the slightest of change in stimulation.

The mindset of naysayers is to use the amount of caloric heating that is imparted by the resistive heating of an incoming wave, and say, because one did not fry an egg, or denature a protein, that the wave is perfectly safe..

And anyone not familiar with psychotronics, bio-neural weapons development are certainly going to nod in agreement and TPTB will continue to be developing said weapons and go about their merry way, and the power companies continue to put up 250KV and higher voltage power lines. And cell towers and microwave generator systems go up everywhere including microwave spot beam Satellites.

Besides the erosion induced from Bearden's "scalars", all of the signals generated by the non-linear mixing have to be dealt with in the nervous system.. AND people report it is HELL on earth having to deal with that the multi-path signal interference (without knowing the words or the physics of the mixing interaction).

I believe what you are doing with the RF Jammer (that high power system) is putting in a stronger more stable RF source from a known location, to over-ride multiple signal paths coming in from different directions, and thereby by swamping your nervous system; you are effectively causing it to ignore the more subtle. Turning the higher power RF off then, what I would think is you would start to surge, swing into being more sensitive, and then have to deal with the hypersensitivity reaction.

Puharich created something he called his Teslar watch. This is a simple nervous system stimulation system designed to act like a subtle method to your high power RF jammer.

When I talked with Andrija in the early 80's, we discussed the various concepts of what was behind the bio-active fields. He asked me to talk with Ingo Swann (which I did and established a bit of a rapport) to get his hit on bioactivity.

A report exists on a study performed with British Parliament members (http://www.teslarscience.com/web-storage/Case%20Studies/Clincal%20pilot%20study%20to%20detemine%20the%20efficacy%20of%20Teslar%20watches%20to%20assist%20in% 20reducing%20stress%20in%20british%20members%20of%20parliament.pdf) - it has Puharich's thoughts about how it works (at least the public sanitized version of that).

What was not talked about in public is what I will mention here, now that Andriah has been dead now for many years and the confidentiality between us has expired.

The watch had a quartz vibrational element inside, and it targeted two copper inserts, which created an acoustic scalar wave, that provided entrainment. Entrainment to what Andriah considered was a healthy field. At that time the discussion was the most healthy field to entrain to, would be the Schumann resonances in the ionospheric cavity of the earth..

When Puharich cut his famous crystals, he ground dielectric quartz to specific angles, so that electromagnetic fields interacting would bounce around and create specific multi-path patterns. In other words, a device was made which put out specific lead-lag, different angles, and different frequencies (of a scalar nature) when a microwave field was imparted to it. Pretty innovative I say if one wanted to be able to induce biological effects at a distance.

At this point I will not go into the weapons aspect of multi-path field generation systems. Such devices ARE horrendous, dastardly and are the weapons of the future of the lowest, most cruel and inhumane method of torture and harm of "the enemy". By being aware sufficiently of multi-path, that should suffice to put enough awareness on what is happening, why, and maybe eventually prevent said development.

Puharich was quite familiar about the mixing of external signals in tissue (a dielectric), and what would happen with multi-path signal impingement. It is said that his work was instrumental in the spook groups understanding how to create the dastardly bio-EM-weapons we all have been experiencing these days.

The beam-dump concept is designed to nullify a specific set of multi-path signals when tuned right. One can make multiple beam dump systems to deal with multiple sets of multipath assault.

Hope that history helps understand a bit better what is happening with the RF system you are using, what it is you are trying to over-ride (the weak multipath signals manifesting in tissue), and why using a simple passive beam dump apparatus would be potentially a better way to prevent "bio-surging", or having to deal with when the rf-jammer is turned off.

A Note: Puharich's Teslar really was an entrainment pacer, like your high power RF Jammer, it was designed to create a nervous system pacing field to over-ride outside assault from multi-path dielectric manifestation, although it would induce fixed entrainment.

I had debated (I consider it more enlightenment) with Puharich back then that fixed entrainment created a target that someone with a quantum holographic targeting system could home in on.

He sort smile and looked at me with those big eyes, hesitated, and said in his soft voice, well it's a good opportunity then to create counter-measures, isn't it.. (paraphrasing a bit as that was in the 80's)..

Since then we've come up with methods, that don't require the brute force over-ride (as with the RF jammer), or don't do entrainment with the fixed scalar frequency active devices. No targeting is possible with the solutions operating.. very elegant actually.

For the people that are aware of multi-path bio-effects it is hell on earth if they have not developed methods inside to "deal with it".

For those not sensitive they could consider it a blessing.

If one though is looking to be aware of biofields, to be in-touch with life and the environment, to not get another beer to numb out or dull-out, but are interested in building up one's ability to perceive "life field patterns and signals" (without equipment and remotely), bombardment (beaming) from multi-path has it's liabilities obviously.

A good reference to read up on the significances of working with multi-path is in this document Quantum Holography. The ability to "tune into" and then visualize what is considered generally as psychotronic, radionic, or here-to-fore invisible "subtle energies" is specifically due to the methods used to translate multi-path signals into conventional 2 dimensional recording plates (photographs).

This article gets into that. If one connects the dots, this article shows that these "invisible fields" are present, and quite dramatic.


http://chanlo.com/images/QuantumHologram.pdf

The reason for the "Beamed ? Easy way to get some relief - COUNTER-MEASURES" thread is to assist, with understanding how to create practically zero cost methods to get some relief from the assault hitting the nervous system. We are now getting into the section of the thread that talks about what is the nature of the assault, how it assaults, and what some solutions have been by others.

[Bob]

Hi Nanook

Post #101 Nanook gets into some of the mechanics. Please read the attached PDF in that post - it has a section on signal phase interactions and their significances. It appears to be a good explanation of how the subtle energies are really quantum interference patterns (another way to explain multi-path interference in dielectrics).

[Nanoo Nanoo]

I know its not the best solution. I am in effect replacing one set of bombardments with another. TO be honest the RF jammer feels better on the whole than whats out there.

I have a version of your book type units all around my windows. It helps keep the place cool as they are make of aluminum reflective material, but the castanet surface has a depth of only 3 inches.. so it may not be effective on lower wavelengths...

Mind you, on the up side, if i had any cancers left in my body im sure the microwaves would have taken them out by now lol

N

[Nanoo Nanoo]

ooh before i forget ! last night i was playing with the rf signals while the jammer was on.. while it knocked out all wifi signals my pc could still connect to the base connection supplier on its World Connection ... meaning while the jammer was blocking my wifi unit i could still log onto their web site and chek my connections stats...

now thats something .. truly makes you wonder just how much we dont know about these little invisible electrons floating around frying our brains ! lol

N

[TrumanCash]

Hi, Bob. Since I don't have a large book to sacrifice for a beam-dump, would cardboard be a good substitute for the 10 book pages?

Would making even larger "pages" make a difference in effectiveness?

Thanks,
Truman

[Bob]

Hi, Bob. Since I don't have a large book to sacrifice for a beam-dump, would cardboard be a good substitute for the 10 book pages?

Would making even larger "pages" make a difference in effectiveness?

Thanks,
Truman

Howdy Truman :)

Couple pages back in the thread, DooDah came up with a way using simple low cost 3 Ring Binders and the cardboard page inserts which are much stiffer than simple normal looseleaf paper pages..

The idea between the pages (organic) and the metal conductor, is to duplicate a type of orgonne system in one aspect, and in the second aspect, to create an RF absorber that is able to deal with multiple different frequencies (and cancel them out). Lastly it contains a way to psychotronically/radionically tune for personal "best feelings".

http://projectavalon.net/forum4/showthread.php?62967-Beamed-Easy-way-to-get-some-relief-COUNTER-MEASURES/page5 has DooDah's 3 ring binder design.

Here is another view of it:


http://projectavalon.net/forum4/attachment.php?attachmentid=24307&d=1388292506&thumb=1

Schematically, nearest to the binding, the spacing should be narrow, and the mouth should be wide. The ever decreasing distance as the spacing gets towards the binding area, is what collapses the electric fields on itself (destructive interference), and the cardboard absorbs the field.

During the destruction of the incoming wave, there are multiple zero-points opened up, which allows for the psychotronic tuning effect (thought "return to sender") being one of the concepts.

Technically it is simple and elegant and fractions of a cost of commercial radionics or psychotronics equipment, which are basically thought form tuners (really overpriced in my opinion)..

As to making it larger (or even smaller), yes is the simplest way.. I have tried a couple of match book sided portable system which I have taken to restaurants - really neat how one can get the noise level to decrease when such is tuned properly.

As to larger. There have been suggestions that a very strong psi-window exists in the 400 megahertz frequency ranges - a range which it is said couples in to the nervous system very well. There are commercial, ham, and military band authorizations in that range. At one point radar-altimeters on planes have been in that band range, I think 225-228 megahertz was the frequency range used (non-linear frequency mixing could bump that up to 450ish megahertz).

Those frequencies are short enough to create multi-path bouncing which evokes the non-linear "scalar" production and the pulsating/warbling ULF/ELF mixing products that are assaulting the nervous system.

It's one of those "oye" bag of worms situations with the Electromagnetic Transmitter people, the "power people", industry that those folks absolutely want to put under the carpet.

Puharich recognized this in the 60-80's as did the spooky types as far as weapons development, and Puharich close to his end of life had decided to try to do something I believe in making amends from weapons research into countermeasures solutions (with his Telsar watch device). Remember the watch he made was about presenting to the body, a known believed to be safe scalar pacing frequency based on Earth Schumann resonances..

The beam dump allows for personal tuning, and offers the benefits of an orgonne system (metal/organic layers), zero-point psychotronic access through the incoming beam cancelling, requires no battery power, and is low cost.

My feeling is optimizing the thickness of the cardboard (organic) layer is important to optimize. My feeling from experimentation was 10 pages of organic material (pages, or looseleaf sheets) was the right thickness.

The overall size of the book was setup to cover the lower end of the cellphone towers, but it didn't get lower into the 400 megahertz (70 centimeter wavelengths) range.

[TrumanCash]

Thanks, Bob, for the information. However, I'm not sure if I understand--So are you saying that making a "page" size significantly larger than an 9 X 12 book might also handle 400 megahertz?

TLC

[Bob]

Thanks, Bob, for the information. However, I'm not sure if I understand--So are you saying that making a "page" size significantly larger than an 9 X 12 book might also handle 400 megahertz?

TLC

Yes, exactly.

Doubling the size should get down to the 400 megahertz range, as what we have been suggesting right now, the 12 inch sizes gets to the lower cellphone range in the 800 megahertz range..

¤=[Post Update]=¤

I've actually experimented with a version of this, that looks like a long pyramid, "horn of plenty" style, that is about 16 inches in the opening, and extends to about 3 feet in the narrow end. Kinda looks like a windsock with a much narrower throat.

[Nanoo Nanoo]

Forgive me if this has been suggested but a Ring binder with manila folders could work instead of a book.

So the organic material inside the sheet of aluminum ( being cardboard ) is what absorbs the trapped frequency ?

The 400 Mhz bandwidth is an interesting one , i have heard scientists state if you can use between 400 and 450 mhz you can virtually control any human.

here is an excerpt from an article on Vocal resonation


Sympathetic and Conductive Resonance[edit]

In a technical sense resonance is a relationship that exists between two bodies vibrating at the same frequency or a multiple thereof. In other words, the vibrations emanating from one body cause the other body to start vibrating in tune with it. A resonator may be defined as a secondary vibrator which is set into motion by the main vibrator and which adds its own characteristics to the generated sound waves.[3]


http://en.wikipedia.org/wiki/Vocal_resonation

While this is a different example would i be correct in assuming we resonate in symbiotic or cymatic responce to external frequencies because our subtle body systems have a myriad of differing frequencies they resonate on ? So lets say a sub system of the heart chakra resonates at between say 450 and 540 hz would the multiplier of resonant frequency of 450 to 540 Mhz be effective to use in order to manipulate this centre ?

Here is some interesting material

https://www.scene.org/~esa/search/human_frequencies/

Here you see the planets resonant frequencies ( assuming they are accurate )

http://www.lyranara.com/product_images/uploaded_images/supertuning2.png

would some of these frequencies be multipliers to EMF frequencies and setting us off even more ? like a ionospheric bounce ?

N

[Bob]

Hi N - :)

The 70 centimeter band has been a curious band as far as the mind control spookies have talked about. It has a good depth of penetration, is relatively easy to create high powers, but is too low in frequency to have very small profiles for built-in antennas for cellphones. It's good for handi-talkies, for communications sets with external antennas.

Post # 106, http://projectavalon.net/forum4/showthread.php?62967-Beamed-Easy-way-to-get-some-relief-COUNTER-MEASURES&p=792696&viewfull=1#post792696
the large ring binder DooDah had, which is used a lot with school kids.. Or the smaller spiral bound (with cardboard covers) could be used as well with the pre-inserted pages.

The key is to just create the orgonne-like accumulator relationship, and to create the angular relationship between corresponding sections (thereby creating the destruction of the electromagnetics). That's the basic conventional physics types of understandings.. The psychotronic tuning comes from setting the precise angles between the pages, with the desired "return to sender" thought form, thereby using the interference pattern's "zero-points" as the quantum actualization vehicle.

(In a zero-point hole quantum manifestation is said to happen, or from nothingness actuality is built, a very prime spiritual concept - this is discussed more-so in this Forum posting in the Gravity Buoyancy Drive (http://projectavalon.net/forum4/showthread.php?66925-Holo-gravitic-buoyancy-drive&p=783296&viewfull=1#post783296))..

There isn't an exact 1:1 relationship between the wavelengths of sound and the wavelengths of microwaves if one wants a direct resonation capability..

The relationship goes something like this.. (see below, one can come up with a rule of thumb translation faction though, see the last comment in the post..)

The absorption frequency of water for an electromagnetic signal (radio wave speed signal) is about 22 gigahertz.
That corresponds to a wavelength (which is a dimensional measurement of distance) of about .54 inches, a little over a 1/2 inch. 22 gigahertz is 22 billion cycles per second, electromagnetic.

The resonant frequency of water for an acoustic sound wave is about 108 kilohertz. That's 108 thousand cycles per second. (People like to try to excite water at 1/4 of that wavelength or about 22 kilohertz, so that may be where folks think that 22 gigahertz electromagnetic resonance is like 22 kilohertz acoustic.. a 1/4 wave excitation is how people like to drive antenna elements, with the shortest physical length of the exciter)..

The speed of wave propagation is different in the media, but the wavelengths which deal with the vibrational structural mode of the molecule are relatively the same - specifically if we are trying to get a target to absorb maximum energy.

My point is think in terms of "dimensional structural resonances" to focus on the "physical size of the object molecules" to be the most accurate to translate between sound resonances and electromagnetic radio wave resonances when going for maximum physical absorption of power..

Resonance means the "best coupling is achieved" with the most transfer of energy with the least resistance. Best transfer means least loss in resistance.

I like to call "going with the flow" the path of least resistance.

Wavelength equation is shown as follows:

http://upload.wikimedia.org/wikipedia/commons/thumb/6/62/Sine_wavelength.svg/1200px-Sine_wavelength.svg.png

The formula for wavelength (lambda) is shown as:

http://chanlo.com/images/wave.jpg

where V is the velocity factor, and f is the frequency (or how many times the wave vibrates, changes polarity, per second)..

As an example for the formula, the wavelength of a 100 MHz electromagnetic (radio) wave is about: [3×10E8 m/s], the speed of light in meters/second) divided by [10E8 Hz] (the frequency of the signal) = 3 meters wavelength. (10E8 is a power of exponent representation of 10 to the 8th)

The speed of sound in liquid water is about 1482 m/s (meters per second). To compute the wavelength for the resonant wavelength of water using SOUND, then plugging that into the equation, then 1482/108,000 = ~.014 meters.. Converting that back to inches for our EM | Sound comparison.. or .55 inch

So the translation for sound resonances to electromagnetic resonance equivalent is
22,000,000,000 cycles per second for radio, to 108,000 cycles per second to sound...

[Bill Ryan]

-------

According to Dr Robert Duncan (http://projectsoulcatcher.blogspot.com/), spending time in a fully-ceramic-tiled bathroom can really help. Ceramics insulate from EMFs, and are among the materials used in the stealth bomber.

30 minute interview, HIGHLY recommended:
http://projectavalon.net/Freedom_Radio_Dr_Robert_Duncan.mp3

[Bob]

Thanks for the bump and suggestion :)

The ceramic almost sounds like if it is a metal-oxide ceramic, it might approach that of the orgonne material talked about.

[HaveBlue]

Thanks for this great thread. The 400mhz stuff interests me. The new EPIRB transmitters for boats, planes and even mountaineers to carry and activate should they need rescue are 406mhz. Is this no co-incidence?

I am yet to read this thread from the start, so if this has been spoken of already, please ignore my question. I will be going over this thread carefully over the next few days.

[Bob]

At times you may hear me talk about quantum coherence. Also NEURAL quantum coherence.

By that I mean, working at the level of when "information" can influence something (like starting to establish its creation and existence apparent in "reality", quantum coherence of the random nothingness, or noise can give way to getting reality's "noise" enough in synch to have a strongly observable phenomena seem "real".

Take a bunch of same model, same pendulum length and weights, "pendulum driven clocks" that are keeping proper time, and have them placed on a large sheet wall, lets say 10 foot wall by 10 foot wide.

Set the times to the same time, and then do not let their pendulum swings start off at the same time.. After a while, the "system" will appear that all the pendulums are tracking together.. This is a macroscopic view of the quantum coherence that forms at the sub-sub atomic level..

When one uses the beam dump "book" device described in this Thread, and one consciously tunes it, one is performing a type of neural to quantum-coherence tuning, establishing a method to "put things right", and develop a better "reality".. which could include having one's mental space feeling clear and not under "beamed influences" or other assaults..

[Agape]

-------

According to Dr Robert Duncan (http://projectsoulcatcher.blogspot.com/), spending time in a fully-ceramic-tiled bathroom can really help. Ceramics insulate from EMFs, and are among the materials used in the stealth bomber.

30 minute interview, HIGHLY recommended:
http://projectavalon.net/Freedom_Radio_Dr_Robert_Duncan.mp3

Makes sense .. ;) It's my idea of ( my ) next generation space economical apartment as well .
It has small pool inside and everything else around it but essentially , one big bath-room. It reduces the time spent on tiding up as well .

[Bob]

If one is getting ear ringing, whistles, clicks and suspects outside energies (microwave, satellites, cellphones, wi-fy's and so forth)..

Try the beam dump in described in this thread and some of the other techniques/apparatus. Simple able to be made with local supplies one has in the home..

(the book's cellulose and the foil layers are very much like Reich's orgonne tools..) so you have many multiple technologies and tools all in one simple "book"..

[Bob]

:bump2:

bumping this post for our new members

If one is getting odd body sensations, crawlies, or strong fatigue, or strong excitation (either range), the sun currently is earth facing a large sunspot which is increasing the active microwave energy hitting the earth.. These types of microwaves can also induce extreme sleepy sensations, out-of-it...feelings can happen. It depends on how much endorphin (natural substances the brain creates to deal with stress) is generated, how one will react..

The microwave energy fields when they interact, reflect .. induce a chaos level in tissues.. Normal balances go out, blood pressure may go up really high, pulse rates similarly.. During solar storms coincidentally hospitals have reported increased Emergency Room visits... because the body rhythms go out..

The tools discussed in this thread help one deal with the microwave fields from many sources, cellphones, routers/modems/computers.. microwave ovens, "long lines" microwave towers and satellite microwave bombardment. It also can help with SOLAR microwave from sunspots creating havoc in one's life..

(the solar thread, Coronal Holes will on occasion discuss the Solar RADIO FLUX which deals with the incoming microwave bombardment from the sun)

With the "beam dump BOOK", tuning it should offer a way to take charge for oneself, one's energetic environment, and get some balance back, if outside sources are forcing outages..

--Bob

[Roisin]

This is amazing because I've been experiencing those sensations and the range is on the excitation end as opposed to the other. But you are right on target with the crawlies/odd body sensation thing and that's sorta freaking me out. lol Other things have been happening too... like seeing in my minds eye one scene after another popping in and out like, boom, boom, boom, at a pace that was so rapid, it prevented me from being able to tell what exactly was in each scene. This happened a few days ago and I can't recall ever experiencing something like that before. It was like everything was in fast forward. Will read over this thread.



:bump2:

bumping this post for our new members

If one is getting odd body sensations, crawlies, or strong fatigue, or strong excitation (either range), the sun currently is earth facing a large sunspot which is increasing the active microwave energy hitting the earth.. These types of microwaves can also induce extreme sleepy sensations, out-of-it...feelings can happen. It depends on how much endorphin (natural substances the brain creates to deal with stress) is generated, how one will react..

The microwave energy fields when they interact, reflect .. induce a chaos level in tissues.. Normal balances go out, blood pressure may go up really high, pulse rates similarly.. During solar storms coincidentally hospitals have reported increased Emergency Room visits... because the body rhythms go out..

The tools discussed in this thread help one deal with the microwave fields from many sources, cellphones, routers/modems/computers.. microwave ovens, "long lines" microwave towers and satellite microwave bombardment. It also can help with SOLAR microwave from sunspots creating havoc in one's life..

(the solar thread, Coronal Holes will on occasion discuss the Solar RADIO FLUX which deals with the incoming microwave bombardment from the sun)

With the "beam dump BOOK", tuning it should offer a way to take charge for oneself, one's energetic environment, and get some balance back, if outside sources are forcing outages..

--Bob

[Bob]

This is amazing because I've been experiencing those sensations and the range is on the excitation end as opposed to the other. But you are right on target with the crawlies/odd body sensation thing and that's sorta freaking me out. lol Other things have been happening too... like seeing in my minds eye one scene after another popping in and out like, boom, boom, boom, at a pace that was so rapid, it prevented me from being able to tell what exactly was in each scene. This happened a few days ago and I can't recall ever experiencing something like that before. It was like everything was in fast forward. Will read over this thread.



With the "beam dump BOOK", tuning it should offer a way to take charge for oneself, one's energetic environment, and get some balance back, if outside sources are forcing outages..

--Bob

So many sources can induce these effects - when it comes from the sun, and from the earth at the same time... oye... rock'n and roll'n... The leaves of the book being moved closer or further apart, allow for precision 'tuning'. The pointing of the "beam dump book" then lets one adjust for addressing WHERE the assault is coming from.. Multiple assaults? multiple books :)

[Roisin]

This is a long thread. Need time to read everything over from its first post. Will comment later and thanks for directing us to this thread!

[onawah]

I'm very grateful for this thread!
I haven't had a chance to read it in depth as yet, but am looking forward to it and to trying out some of the suggestions.
Thanks!

[Bob]

Thanks OnaWah - the key is in the tuning (moving the placement of the book, pointing it appropriately, and then adjusting the spacing of the leaves to the correct angle..) - easy to tune to get relief, best possible sensation.. Lots of advanced tuning but this is the easiest to get started... The material of book plus metal allows for orgonne btw to be worked with.. :)

Top of the New Year to you and all

-Bob

[onawah]

I'll be working on that today, Bob.
Thanks again. I may take it to work with me, as my workplace is very near a cell phone tower. I live in a very liberal little town, so I probably won't get ribbed about it too much! :lol:
Happy New Year!
( My town just got great news-- the local energy provider will not be building a huge system of power lines through our region, after much protest from locals.
So I won't have as many EMFs to deal with, at least!
See my posts here: http://projectavalon.net/forum4/showthread.php?78549-The-C.C-s-Manuscript-of-Survival-Part-431-As-Received-by-Aisha-North )

[onawah]

I've got one book made, and it does seem to be helping.
I'm going to make a second one today.
Thanks again, Bob, for this easy, inexpensive method for protection.

[Bob]

I've got one book made, and it does seem to be helping.
I'm going to make a second one today.
Thanks again, Bob, for this easy, inexpensive method for protection.

Try different sized books too.. The key is finding the right spot(s) in the room which have the most amount of microwave reflections (which is where the intense scalars build up, as a noxious spot), and put the beam dump book there. Adjust the pointing location, the height, the angles of the pages, the angle of the book.. In short you have full control over the noxious energies, and how they are dumped or damped out.

In the thread is the Dixie Cup Tuner.. That one lets you setup POSITIVE energy.. So after using the beam dump to clean out negative disruptive vibes.. the Positive can be brought through more-so ..

[c0di]

http://projectavalon.net/forum4/attachment.php?attachmentid=28836&d=1423440921
http://projectavalon.net/forum4/attachment.php?attachmentid=28837&d=1423440921

i've done about 3 different models, with varying thickness. these i just made and have been trying out pointed at hot spots.

thanks again bob! indeed crown opening at 89 degrees. it's like we're blasted to prevent the connection and keep our biofield constantly in stress. i'll be posting more of my r&d with this.

fyi, i use thicker aluminum foil than the basic store bought stuff and use 3M adhesive to get the sheet perfectly on the "page".

:)

[Bob]

Very well done ! c0di

I wonder if the crown chakra is also attacked from microwave from satellites?

[c0di]

indeed it is getting attacked. the book opens up communication per se with my energy outside of physicality. i have multiple people making these and testing them out. :)

[Carmody]

Here's one for ya, Bob.

Terahertz beam splitter/filter. Inkjet printed.

Then, if we go to the idea of reality being painted into existence on a wave of UV and above frequencies...then..things like printed filters, printed words, shapes, etc..all take on appropriate meaning. I included the image, as in this case, the reference is important.

New filter could advance terahertz data transmission (http://phys.org/news/2015-02-filter-advance-terahertz-transmission.html)

http://cdn.phys.org/newman/gfx/news/hires/2015/newfiltercou.jpg

University of Utah engineers have discovered a new approach for designing filters capable of separating different frequencies in the terahertz spectrum, the next generation of communications bandwidth that could allow cellphone users and Internet surfers to download data a thousand times faster than today. Once the filter is designed, it can be fabricated using an off-the-shelf inkjet printer.

Filtering out different frequencies will be important in the development of the terahertz spectrum for communications. By filtering out unwanted frequencies users can download information from the Internet or talk on a cellphone, for example, with less noise or interfering signals.

The terahertz range refers to the band of frequencies between infrared light and radio waves. Engineers consider it the next frontier in communications because of the enormous potential for boosting data transmission rates. The technology also is being studied for next-generation medical imaging and airport scanners. Terahertz rays, or T-rays, can pass through many materials without using ionizing radiation, which makes them attractive for use in medical imaging and security screening devices.

This new methodology for creating filters was published in a paper Feb. 27 in The Optical Society's online journal, Optica.

"Your cellphone operates at a frequency of 2.4 gigahertz. A terahertz is a thousand gigahertz," said graduate student Andrew Paulsen, who co-authored the paper with U electrical and computer engineering professor, Ajay Nahata. "If we could effectively use the terahertz spectrum for communications, we could have a thousand times more bandwidth than we currently do."

Paulsen and Nahata discovered that by creating certain computer-generated designs using engineering software called MATLAB and printing them on a plastic sheet via a regular inkjet printer, they could create a filter that allows certain terahertz frequencies to pass through while blocking others out. The printer uses silver-metal ink similar to what is used for the production of circuit boards and tiny antennas.

By using a terahertz generator, which shoots out an invisible beam of light, researchers can measure the frequencies as the beam passes through the filter. The dimensions and geometry of the printed designs, which can look like a wavy bull's-eye for example, determine which frequencies get through and to what extent.

This method is an important step in utilizing the terahertz spectrum for commercial use, possibly as the basis for the next "5G" network for cellphones. If cellphones on a current "4G" network can download data at 10 to 15 megabits per second, terahertz technology can potentially send data back and forth at terabits per second (or millions of megabits per second). Using filters in such a network will be a vital component because it will be necessary to separate frequencies in order to create multiple communication channels. Many wireless devices use filters to single out frequencies, including Wi-Fi routers, televisions and cellphones.

It might be another 10 years before consumers are using Wi-Fi routers or cellphones with terahertz technology, but communications companies could use it for their network backones much sooner. A current limitation of terahertz frequencies is that they require line of sight and can transmit only over short distances. But some researchers have already achieved lightning download speeds with wireless terahertz chips, and others are interested in broadcasting super-high-definition 4K television signals over the air with cameras that use the terahertz spectrum.

"Terahertz technology is something there is a lot of interest in," Nahata said. "I guarantee that people will come up with new ideas that can use all of that available bandwidth."


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


That it may be possible to 'paint' a room-space, with the correct filter.

[Bob]

Excellent Carmody, what folks could use is also a 3D printed version of the book, with some way to incorporate the metallic patterns.. A beam dump is simple, basically stuff one can find in their kitchen and on the book shelf..

Some of this exotic stuff could provide some great relief.

I really like the idea of TUNABILITY to whatever specifically is bombarding folks so they can immediately dump that microwave field..

The standing waves, are the most assaulting patterns..

What Becker had noted, was besides the direct EMF (Electromagnetic fields), when there were complex fields, then within tissue, these fields would create destructive interference, and in that case, that is where the damage is happening, in the destructive interference..

[Bob]

:bump:

Great thread for the new folk to take a look at - feng shui for one's environment.. :)

[Bob]

:bump:

every now and then for the new folk I think it is worth revisiting this thread when, especially when folks feel like they are being energetically assaulted...

[Bob]

I think it is time to do a bump :bump2: for the thread as folks are starting to say SCALARS are good for one - they are not.

[Ernie Nemeth]

Read through this thread again. lots of great information on personal shielding.

Highly recommended

[onawah]

I agree and I just posted a link to this thread here:
http://projectavalon.net/forum4/showthread.php?99053-Targeted-Individual-Gretta-Fahey-Knowledge-is-Power&p=1170777&viewfull=1#post1170777

[Ernie Nemeth]

Just wanted to add that I set my microwave dumb books last night and the ringing in my ears stopped immediately. No more ringing!

I had become used to the noise. I had learned to live with it. Man, what a difference.

Or maybe it's a coincidence

[Bob]

If you all recall, Reich talked about orgone, and folks have talked about orgonite to be able to deal with assaults.. The concept behind the microwave beam dump has an aspect of "orgone" within between the paper/metal layers, very similar to Reich's orgone accumulators.

How we differ with this is the book device is TUNABLE, and orientable to the direction where the microwave comes in from. As I pointed out else where, there are chances that because microwaves bounce around, there can be multiple directions where the microwaves can come in from, and of course there are multiple sources of microwave signals in our lives these days from wireless LAN's wireless hot spots, cell towers, satellites, and still point-to-point microwave data relays.

What I have found, when we can FEEL the effects, there are a couple of conditions that happen.. A direct single microwave signal being sent from a transmitter where we are in a FAR FIELD condition, (some distance away, lets say greater than 100 feet) the available power that can be absorbed by tissues is below the HEATING threshold which the regulatory bodies have set as safe standards..

BUT when multi-path conditions happen (reflected and direct waves being received), there are higher voltage gradients created in tissue which can then trip a nerve into firing. That then is felt.

When the microwave signals are 180 degrees out of phase or "phase conjugating", there is complete destruction of the voltage, but the SCALAR component or "force component" of the wave appears. And that scalar component is destructive to matter.. That can be felt.

The beam dump concept illustrated in this thread allows for tunability to be able to address multiple wavelengths (channels lets say) of microwave to be phase cancelled, absorbed like how orgone would be absorbed in the paper layers, and oriented in the needed direction (use multiple books for multiple directions). The psychotronic effect can be created to neutralize the scalar by precise tuning (quantum interference holographic tuning method). That can deal with a simple destructive "harassment" beam based on microwave scalar.

Let's leave it at that for the more advanced theory.

Getting rid of the ringing is a pretty good tweak there Ernie - well done !

[c0di]

hello long lost friends!

I have a question. How could we use this tech against the pulsed oscillations now coming into our homes with these smart meters? Any thoughts?

I have a few, but unsure how to do it.

[Bob]

hello long lost friends!

I have a question. How could we use this tech against the pulsed oscillations now coming into our homes with these smart meters? Any thoughts?

I have a few, but unsure how to do it.

That's a good question.

This type of method, is called a microwave beam dump, with similarities to orgone and orgonite effects due to the layers of metal/insulator/metal/insulator which Reich was noted for. I added the "radionic" like tuning method, which is the spacing between the leaves of the book.

Potentially the radionic-like tuning would be useful as an in-direct method. I believe the smartmeter (The frequency of operation is typically in the 902 MHz and 2.4 GHz bands. Power output is typically 1 watt in the 902 MHz band and much less in the 2.4 GHz band.) see: http://www.arrl.org/smart-meters

Potentially "carrier current" radio frequencies are used, instead of the higher cellular-phone-like and WLan frequencies (operating in the 1.7 to 80 MHz frequency bands).

Saturation then in one's building would be similar to having a cellphone in use and a wireless LAN (such as from one's notebook computer and wireless router).

I'd suggest trying the beam dump book and adjusting it (tuning radionically in other words) for best possible feel. It may require more than one setup book as there most likely would be multiple locations where the RF would be entering and bouncing around.

Some alternate methods used what is called a biological pacer, similar to a pacemaker which induces a strong but more biologically stabilizing frequency than the digital modulation on those microwave carriers. Some folks have looked at low frequency schumann frequencies on said microwave carriers, Puharich was the earliest researcher that I know of who developed a 10 hertz band modulator for his watch devices.

[Ernie Nemeth]

I am just recovering from ... something. About three days of heavy feelings, unexplainable funk, sleep disruption and digestive disorder. It was like getting hit with a metaphoric brick!

I wonder if it could have been the Hurricane Harvey energy dump from the stratosphere heaters. It almost literally hurt. Both me and my girl experienced it hard. I did not teoll her what I believe the cause to be because there's no proof and I don't want to scare her.

I think there may be a new threat that is just coming to the fore but has been in development now for over thirty years - ELF and VLF communications. When they first began experiments with this technology there were numerous reports of whale beachings, whales crashing into propellers and otherwise acting crazy and suicidal. Now there are hints this tech is being used in more nefarious ways and that the weaponry is far more refined and accurate. There are some threads on this development.

c0di: Pulsed energy signals should respond well to this beam dump design except that the tuning might be more tricky since the signal is intermittent.

[Bob]

Maybe the 5G tests Ernie too, which are higher in carrier frequency - some of the frequencies would be in DNA absorption bands, not good, potentially resonances with neuro-transmitters too.. A lot of psychic stress from folks harmed by Harvey no doubt..

The storm fronts, continual low pressure and fixed stationary fronts don't appear normal "mother nature". I believe due to earth rotation, solar heating (sun-up, then sun-down), and the normal convection currents, we should be seeing movement, and not "stuck" lows, or stuck highs. The only really effective system that can steer fronts or induce "stuck" patterns are ionospheric "blowers", that create nano-particles electrically, and "blown" by microwave RF.. Something a submarine could launch, or a fixed land-based system over or within 400-500 miles of the "stuckness" can do.

HAARP is just not close enough to induce a stuck pattern continually which doesn't move.. There is way too many horsepower coming from the planetary convection currents that has to be overcome by HAARP.. If sections out of "weather-wars" could be moved into "General PA members only", it may be a useful read how it's (or was) done.

[c0di]

I have made multiple versions of the beam dump, but this is for hard lines. The electricity inside homes now with the smart meter is creating a pulsed resonant frequency (my hunch is biological change which grosses me out) which almost creates full saturation of signal which the book cannot handle unless i live behind the spine of it solely, haha. :) That would be fun to make though. I am making a prototype this weekend, but it will incorporate an oscillating resonant frequency magnetic field. This is my only hunch towards so i can negate what they're doing to the home run electricity. Strong magnets help on the feed line, as well as a full faraday cage on the smart meter. but I am a nut and need full clean up! haha.

Yes, the Harvey experiment was interesting to say the least. Almost seemed to just sit there... They do have plasma based tech they use that is very nasty.

[Bob]

I have made multiple versions of the beam dump, but this is for hard lines. The electricity inside homes now with the smart meter is creating a pulsed resonant frequency (my hunch is biological change which grosses me out) which almost creates full saturation of signal which the book cannot handle unless i live behind the spine of it solely, haha. :) That would be fun to make though. I am making a prototype this weekend, but it will incorporate an oscillating resonant frequency magnetic field. This is my only hunch towards so i can negate what they're doing to the home run electricity. Strong magnets help on the feed line, as well as a full faraday cage on the smart meter. but I am a nut and need full clean up! haha.

Yes, the Harvey experiment was interesting to say the least. Almost seemed to just sit there... They do have plasma based tech they use that is very nasty.

Yes, I saw your earlier posts in this thread :)

The smart meter has to send it's signals out, and receive signals, so if it is still functioning, it seems that the faraday cage is not really stopping transmissions out or in..

From my observations, the nervous system is able to pick up and register 1 nanowatt easily if the field is scalar. Such a scalar power level will trip a synapse. A reflection "shield" which a faraday cage would be, could very well be creating increased amounts of high intensity scalar (direct signal + reflection + direct signal + reflection ... etc.) until one went really "mad" with the amp'd up insults.. So that would be a potential issue with a faraday shield surrounding a transmitter that is emitting microwave frequencies... awful situation there..

An absorber, probably something like what is used for microwave shields in anechoic chambers (see: https://www.cumingmicrowave.com/products/carbon-based-foam-absorbers.html)
consisting of that type of material in the minimum, would absorb like the organic in the "book" and not allow for reflections and thereby scalar generation..

This foam: https://www.cumingmicrowave.com/products/carbon-based-foam-absorbers/700-mhz-3-ghz-isolation-foam.html absorbs the smart meter RF, as it covers 700 megahertz through 3000 megahertz.

Point being faraday cage, without absorbers, only creates MORE scalars if the signal makes it in the cage.. A sprayable absorber: https://www.cumingmicrowave.com/products/sprayable-absorbers.html might be a way of creating a safe space for eliminating large amounts of microwaves.

When though the electromagnetics have evoked the scalar, that scalar is what can penetrate solids, or metals, or water to some extent. A scalar radionic weapon (or scalar psychotronic weapon) would be formidable to shield against.

This is where Puharich excelled in coming up with the only workable solution for lower level "nuisance" scalars, which was a bio-pacer 10 hertz weak crystalline scalar generator, not just a magnetic pacer, nor an electric pacer, or electromagnetic pacer. His logic was fight nuisance scalars (which are omnipresent in the environment due to immense microwave saturation), with a schumann scalar biopacer, using a vibrating crystalline element within a wearable watch. A frequency was chosen which was healthy for the nervous system and environment. It was great logic. Puharich was killed by the cabal for having revealed the solution. They put a set of small supermagnets on his room ceiling fan blades designed to create a screwed up spiraling magnetic field which caused his nervous system and balance to go way off. He fell down his stairs fatally injuring himself.. It was an insidious malevolent attack.. But it should help to enlighten one about the dangers of spinning magnetic fields..

[c0di]

I have made multiple versions of the beam dump, but this is for hard lines. The electricity inside homes now with the smart meter is creating a pulsed resonant frequency (my hunch is biological change which grosses me out) which almost creates full saturation of signal which the book cannot handle unless i live behind the spine of it solely, haha. :) That would be fun to make though. I am making a prototype this weekend, but it will incorporate an oscillating resonant frequency magnetic field. This is my only hunch towards so i can negate what they're doing to the home run electricity. Strong magnets help on the feed line, as well as a full faraday cage on the smart meter. but I am a nut and need full clean up! haha.

Yes, the Harvey experiment was interesting to say the least. Almost seemed to just sit there... They do have plasma based tech they use that is very nasty.

Yes, I saw your earlier posts in this thread :)

The smart meter has to send it's signals out, and receive signals, so if it is still functioning, it seems that the faraday cage is not really stopping transmissions out or in..

From my observations, the nervous system is able to pick up and register 1 nanowatt easily if the field is scalar. Such a scalar power level will trip a synapse. A reflection "shield" which a faraday cage would be, could very well be creating increased amounts of high intensity scalar (direct signal + reflection + direct signal + reflection ... etc.) until one went really "mad" with the amp'd up insults.. So that would be a potential issue with a faraday shield surrounding a transmitter that is emitting microwave frequencies... awful situation there..

An absorber, probably something like what is used for microwave shields in anechoic chambers (see: https://www.cumingmicrowave.com/products/carbon-based-foam-absorbers.html)
consisting of that type of material in the minimum, would absorb like the organic in the "book" and not allow for reflections and thereby scalar generation..

This foam: https://www.cumingmicrowave.com/products/carbon-based-foam-absorbers/700-mhz-3-ghz-isolation-foam.html absorbs the smart meter RF, as it covers 700 megahertz through 3000 megahertz.

Point being faraday cage, without absorbers, only creates MORE scalars if the signal makes it in the cage.. A sprayable absorber: https://www.cumingmicrowave.com/products/sprayable-absorbers.html might be a way of creating a safe space for eliminating large amounts of microwaves.

When though the electromagnetics have evoked the scalar, that scalar is what can penetrate solids, or metals, or water to some extent. A scalar radionic weapon (or scalar psychotronic weapon) would be formidable to shield against.

This is where Puharich excelled in coming up with the only workable solution for lower level "nuisance" scalars, which was a bio-pacer 10 hertz weak crystalline scalar generator, not just a magnetic pacer, nor an electric pacer, or electromagnetic pacer. His logic was fight nuisance scalars (which are omnipresent in the environment due to immense microwave saturation), with a schumann scalar biopacer, using a vibrating crystalline element within a wearable watch. A frequency was chosen which was healthy for the nervous system and environment. It was great logic. Puharich was killed by the cabal for having revealed the solution. They put a set of small supermagnets on his room ceiling fan blades designed to create a screwed up spiraling magnetic field which caused his nervous system and balance to go way off. He fell down his stairs fatally injuring himself.. It was an insidious malevolent attack.. But it should help to enlighten one about the dangers of spinning magnetic fields..

excellent, i am checking all of this out and adding into my knowledge banks!

so far, my test, i have had success. i have made a magnetic induction based orgonite that is negating the signal or more so transmuting it. funny i have not made magnetic orgonite, nor know of any others in all my work that have. i engineer in replicting nature. being electromagnetic being... magnetic orgonite... ::face palm:: haha!

i as well put together a 55 gallon sized emitter transmuter of my own design with flowing water.

needless to say, i have almost an incredible shift in the amount of energy and clarity. i will test this out over the week and report back.

[Bob]

I have made multiple versions of the beam dump, but this is for hard lines. The electricity inside homes now with the smart meter is creating a pulsed resonant frequency (my hunch is biological change which grosses me out) which almost creates full saturation of signal which the book cannot handle unless i live behind the spine of it solely, haha. :) That would be fun to make though. I am making a prototype this weekend, but it will incorporate an oscillating resonant frequency magnetic field. This is my only hunch towards so i can negate what they're doing to the home run electricity. Strong magnets help on the feed line, as well as a full faraday cage on the smart meter. but I am a nut and need full clean up! haha.

Yes, the Harvey experiment was interesting to say the least. Almost seemed to just sit there... They do have plasma based tech they use that is very nasty.

Yes, I saw your earlier posts in this thread :)

The smart meter has to send it's signals out, and receive signals, so if it is still functioning, it seems that the faraday cage is not really stopping transmissions out or in..

From my observations, the nervous system is able to pick up and register 1 nanowatt easily if the field is scalar. Such a scalar power level will trip a synapse. A reflection "shield" which a faraday cage would be, could very well be creating increased amounts of high intensity scalar (direct signal + reflection + direct signal + reflection ... etc.) until one went really "mad" with the amp'd up insults.. So that would be a potential issue with a faraday shield surrounding a transmitter that is emitting microwave frequencies... awful situation there..

An absorber, probably something like what is used for microwave shields in anechoic chambers (see: https://www.cumingmicrowave.com/products/carbon-based-foam-absorbers.html)
consisting of that type of material in the minimum, would absorb like the organic in the "book" and not allow for reflections and thereby scalar generation..

This foam: https://www.cumingmicrowave.com/products/carbon-based-foam-absorbers/700-mhz-3-ghz-isolation-foam.html absorbs the smart meter RF, as it covers 700 megahertz through 3000 megahertz.

Point being faraday cage, without absorbers, only creates MORE scalars if the signal makes it in the cage.. A sprayable absorber: https://www.cumingmicrowave.com/products/sprayable-absorbers.html might be a way of creating a safe space for eliminating large amounts of microwaves.

When though the electromagnetics have evoked the scalar, that scalar is what can penetrate solids, or metals, or water to some extent. A scalar radionic weapon (or scalar psychotronic weapon) would be formidable to shield against.

This is where Puharich excelled in coming up with the only workable solution for lower level "nuisance" scalars, which was a bio-pacer 10 hertz weak crystalline scalar generator, not just a magnetic pacer, nor an electric pacer, or electromagnetic pacer. His logic was fight nuisance scalars (which are omnipresent in the environment due to immense microwave saturation), with a schumann scalar biopacer, using a vibrating crystalline element within a wearable watch. A frequency was chosen which was healthy for the nervous system and environment. It was great logic. Puharich was killed by the cabal for having revealed the solution. They put a set of small supermagnets on his room ceiling fan blades designed to create a screwed up spiraling magnetic field which caused his nervous system and balance to go way off. He fell down his stairs fatally injuring himself.. It was an insidious malevolent attack.. But it should help to enlighten one about the dangers of spinning magnetic fields..

excellent, i am checking all of this out and adding into my knowledge banks!

so far, my test, i have had success. i have made a magnetic induction based orgonite that is negating the signal or more so transmuting it. funny i have not made magnetic orgonite, nor know of any others in all my work that have. i engineer in replicting nature. being electromagnetic being... magnetic orgonite... ::face palm:: haha!

i as well put together a 55 gallon sized emitter transmuter of my own design with flowing water.

needless to say, i have almost an incredible shift in the amount of energy and clarity. i will test this out over the week and report back.

That's super !

How about posting a pen and paper design (smartphone capture) to the forum? And some instructions - the members affected by such may want to give it a try ===> thanks !

[Ernie Nemeth]

[Bob] seems to be extremely knowledgeable in diverse subjects; But he made a thread about a little book that is suppose to protect from EMF which is of course a complete BS to someone who understands EMW propagation.

Whether those tin foil books work or not, it stopped my ears ringing, and they rarely ring anymore. Still have two such books standing on my bookshelf ever since. I periodically adjust them for peak performance. Sometimes physical props can be the trigger or the totem or the focal point for summoning ones own powers... even if they in fact have no scientific basis for the assumed improvement.

Could we agree on that, Bubu?

[Bubu]

[Bob] seems to be extremely knowledgeable in diverse subjects; But he made a thread about a little book that is suppose to protect from EMF which is of course a complete BS to someone who understands EMW propagation.

Whether those tin foil books work or not, it stopped my ears ringing, and they rarely ring anymore. Still have two such books standing on my bookshelf ever since. I periodically adjust them for peak performance. Sometimes physical props can be the trigger or the totem or the focal point for summoning ones own powers... even if they in fact have no scientific basis for the assumed improvement.

Could we agree on that, Bubu?

well yes, good for you. Have you considered the science of epeginetics or in simple term placebo?
If you remember, i have questioned Bob about this or how is it suppose to work. Also giving my analogy of omni directional propagation of EMW. But never get an answer.