The Rodin Coil: Is It The Greatest Discovery of All Time?

[jackovesk]

March 1, 2014

https://theyinfactor.files.wordpress.com/2014/01/vortexcoil-1024x684.jpg?w=604

Free energy is easily one of the hottest topics in the world within alternative news. While mainstream news continues to ignore the growing interest around the subject, alternative news outlets are providing new information about the inventions, science, mathematics and suppression of free energy technologies. We even covered the subject in our new documentary The Collective Evolution III: The Shift

The trouble with the advancement of free energy as it stands now lies in a couple clear areas.

1. The current corporate powers and systems of our world would lose mass amounts of profit and control over people if they no longer required them for their energy needs. We’re talking about using this technology in cars, homes and businesses. This leads to mass suppression of the technology.
2. Certain devices do in fact defy the currently understood “laws” of physics. Many are having a very tough time opening their minds up to the idea that what we once understood about something could have changed or is now updated. This same issue is prevalent in other areas of science as well.
3. Many inventors are either being killed or silenced and some are too concerned with credit, patents and profits for devices to really come into fruition more easily.

However, these hang ups are not stopping the spread of information surrounding not only the science but also the reality of these devices. In what could be one of the greatest discoveries of all time, Marko Rodin has created a 3-dimensional model of the mathematical language of nature.


“They say mathematics is the language of god, but until now nobody has been speaking god’s language”.


http://www.cropcircleconnector.com/images/part5-21d.jpg

As stated by Marko Rodin and his volunteers, the Rodin Coil has the ability to completely transform our world given what it is capable of. The challenge is, regardless of the fact that his work has been peer-reviewed by some of greatest and most prestigious names in science, there is still a tremendous lack of attention being put toward their work. But there is a silver lining to this, one of the reasons why is because Marko and his team do not want to sell out to private interests and corporations who might suppress, change or think only about profit when it comes to this work.

Practical Implications Of This Technology

• Inexhaustible free energy
• An end to all disease
• Produce unlimited food
• Travel anywhere in the universe
• Build the ultimate supercomputer
• Obsolete all existing technology

“Our goal to create a grassroots energy and technology revolution by turning this knowledge over to the public in an open-source project. Science museum exhibits for kids, a simple book, a simple DVD, that’s all we’re looking to do. We want to turn it into the hands of the people to produce and save the whole world”.


http://www.youtube.com/watch?v=Po-yib77vgA
http://www.collective-evolution.com/2014/03/01/the-rodin-coil-is-it-the-greatest-discovery-of-all-time/

[Tesla_WTC_Solution]

What do you think of this crazy ass Rense article, Jackovesk?

I think parts of it are startling and others are difficult to make sense of. Real/fake??

http://rense.com/rodinaerodynamics.htm

This is pretty interesting stuff, "helical waveforms" etc. "toroid universe", etc.

The coil thing looks a lot like the shape you'd want around a spacecraft (deflection/insulation field); can it project this shape around itself?
If so, it's like a hack for spaceflight @_@

Thank you for posting it, very thought provoking thing you've found here.
Some of the details are so interesting all by themselves, you know that if any of it's true people will try to write disinfo about it, also.
It's hard to find good info.

apparently Tesla had a Flat one:

http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/TeslaBifilar.png/220px-TeslaBifilar.png

http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/TeslaBifilar.png/220px-TeslaBifilar.png

http://en.wikipedia.org/wiki/Bifilar_coil

A bifilar coil is an electromagnetic coil that contains two closely spaced, parallel windings. In engineering, the word bifilar describes wire which is made of two filaments or strands. It is commonly used to denote special types of winding wire for transformers. Wire can be purchased in bifilar form, usually as different colored enameled wire bonded together. For three strands, the term trifilar coil is used.

Some bifilars have adjacent coils in which the convolutions are arranged so that the potential difference is magnified (i.e., the current flows in same parallel direction). Others are wound so that the current flows in opposite directions. The magnetic field created by one winding is therefore equal and opposite to that created by the other, resulting in a net magnetic field of zero (i.e., neutralizing any negative effects in the coil). In electrical terms, this means that the self-inductance of the coil is zero.

The bifilar coil (more often called the bifilar winding) is used in modern electrical engineering as a means of constructing wire-wound resistors with negligible parasitic self-inductance.



Bifilar wound toroidal transformer.
A different type of bifilar coil is used in some relay windings and transformers used for a switched-mode power supply to suppress back-emf. In this case, the two wire coils are closely spaced and wound in parallel but are electrically isolated from each other. The primary coil is driven to operate the relay, and the secondary coil is short-circuited inside the case. When the current through the primary is interrupted, as happens when the relay is switched off, most of the magnetic energy is intercepted by the secondary coil which converts it to heat in its internal resistance. This is only one of several methods of absorbing the energy from the primary coil before it can damage the device (usually a vulnerable semiconductor) that drives the relay. The main disadvantage of this method is that it greatly increases the switching time of the relay.

When used in a switching transformer, one winding of the bifilar coil is used as a means of removing the energy stored in the stray magnetic flux which fails to link the primary coil to the secondary coil of the transformer. Because of their proximity, the wires of the bifilar coil both "see" the same stray magnetic flux. One wire is clamped to ground usually by a diode so that when the other "primary" wire of the bifilar coil no longer has a voltage applied across it by the switching transistor, the stray magnetic flux generates a current in the clamping coil with the primary side voltage appearing across it, causing an equal voltage to appear across the primary winding. If this clamping coil was not used, the stray magnetic flux would attempt to force a current to flow through the primary wire. Since the primary wire is switched off and the switching transistor is in a high resistance state, the high voltage which would appear on the semiconductor switching transistor would exceed its electrical breakdown or even damage it.

Bifilar coils impose an inductance in the common mode, but impose no inductance in the differential mode. Coils in such a combination are widely used to eliminate ingress or egress of common mode signals from electronic signalling circuits. This arrangement is used in transmission and reception magnetics of Ethernet cables [1] and conspicuously in the form of a ferrite bead clamped to the outside of USB, laptop power supply and HDMI cables.

http://upload.wikimedia.org/wikipedia/commons/thumb/e/e2/Bifilar_wound_toroidal_transformer.jpg/220px-Bifilar_wound_toroidal_transformer.jpg


________________________________

Hey the computer geeks stole tesla's stuff (but made it better?)

[Lifebringer]

Well, halleluyah yes. Have you tried kickstarter, they will fund you up the gazoo. Have several witness/friends/associates/grassroot/or community church leader of the "real service to the poor," and take them with you to bare witness at every meeting, so there is not theft for profit. Sure everyone was raised in that for profit bubble, but usually it was because a product was hard to produce, and the price shifted to customer. Now with just a design, massive amounts of free energy can close gov programs for heat in the summer and air conditioning during those severe drought summers, saving tax payers 100's of millions of dollars. Why with this power, we can also can recycle excess snow water and clean waste water for farms in trouble as well as states. A win-win for those organic farmers, who know to use their own water sources for crops. Well worth an investment for the future.:clap2: How much can you tax the people, if it's so inexpensive. Great idea, let's take it there, and anyone with support, that "honestly isn't greed driven, and wants to end the utility slavery of the 20th century," please send recommendation and a percentage of grassroot donation to get it off the ground. United we the people can stand in clean energy and survive the coming "isms" whatever, and it's time for the generations of evolution and free thinking spiritual practices, unite for the good of all living breathing creatures on this earth with smart clean solutions. What say you guys? Is it possible the waves can make the waves of change necessary to move forward?

Imagine a public utility that runs everything in the country with a pulse switch on and off. Everything could be used, and if the juice reduction time is spaced further apart, there won't be too much of a over surge over time, will it? This is the part that is scientific. If it is started, then the switch disconnected to run on it's own, it can feed the main lines of the grid, only storm monitoring and repair will be needed, as maintenance or earthquake, if buried below ground, which is a ground in itself. Less cost on maintenance from "no wind or tree damage during storms.":lol::pound:
Now that's what I call taking the shackle off people's incomes for elites that don't give a darn about people, childhood cancer, or toxic water on the planet, not to mention blowing up crust or running leaky oil or gas pipelines for the corp grid of another ownership of power. If I'm not mistaken, if it's our tax research dollars that get it off the ground, it's well worth it for our children and grandchildren's source of power/people controlled future.
The utility plantations, must be served their papers with their over cost and stealing in VA then trying to figure out how they can keep the overcharges and apply it to the bill of customers, instead of returning their hard earned money. Booyah, this is a win-win for the future.

[jackovesk]

What do you think of this crazy ass Rense article, Jackovesk?

I think parts of it are startling and others are difficult to make sense of. Real/fake??

http://rense.com/rodinaerodynamics.htm

This is pretty interesting stuff, "helical waveforms" etc. "toroid universe", etc.

The coil thing looks a lot like the shape you'd want around a spacecraft (deflection/insulation field); can it project this shape around itself?
If so, it's like a hack for spaceflight @_@

Thank you for posting it, very thought provoking thing you've found here.
Some of the details are so interesting all by themselves, you know that if any of it's true people will try to write disinfo about it, also.
It's hard to find good info.

apparently Tesla had a Flat one:

http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/TeslaBifilar.png/220px-TeslaBifilar.png

http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/TeslaBifilar.png/220px-TeslaBifilar.png

http://en.wikipedia.org/wiki/Bifilar_coil

A bifilar coil is an electromagnetic coil that contains two closely spaced, parallel windings. In engineering, the word bifilar describes wire which is made of two filaments or strands. It is commonly used to denote special types of winding wire for transformers. Wire can be purchased in bifilar form, usually as different colored enameled wire bonded together. For three strands, the term trifilar coil is used.

Some bifilars have adjacent coils in which the convolutions are arranged so that the potential difference is magnified (i.e., the current flows in same parallel direction). Others are wound so that the current flows in opposite directions. The magnetic field created by one winding is therefore equal and opposite to that created by the other, resulting in a net magnetic field of zero (i.e., neutralizing any negative effects in the coil). In electrical terms, this means that the self-inductance of the coil is zero.

The bifilar coil (more often called the bifilar winding) is used in modern electrical engineering as a means of constructing wire-wound resistors with negligible parasitic self-inductance.



Bifilar wound toroidal transformer.
A different type of bifilar coil is used in some relay windings and transformers used for a switched-mode power supply to suppress back-emf. In this case, the two wire coils are closely spaced and wound in parallel but are electrically isolated from each other. The primary coil is driven to operate the relay, and the secondary coil is short-circuited inside the case. When the current through the primary is interrupted, as happens when the relay is switched off, most of the magnetic energy is intercepted by the secondary coil which converts it to heat in its internal resistance. This is only one of several methods of absorbing the energy from the primary coil before it can damage the device (usually a vulnerable semiconductor) that drives the relay. The main disadvantage of this method is that it greatly increases the switching time of the relay.

When used in a switching transformer, one winding of the bifilar coil is used as a means of removing the energy stored in the stray magnetic flux which fails to link the primary coil to the secondary coil of the transformer. Because of their proximity, the wires of the bifilar coil both "see" the same stray magnetic flux. One wire is clamped to ground usually by a diode so that when the other "primary" wire of the bifilar coil no longer has a voltage applied across it by the switching transistor, the stray magnetic flux generates a current in the clamping coil with the primary side voltage appearing across it, causing an equal voltage to appear across the primary winding. If this clamping coil was not used, the stray magnetic flux would attempt to force a current to flow through the primary wire. Since the primary wire is switched off and the switching transistor is in a high resistance state, the high voltage which would appear on the semiconductor switching transistor would exceed its electrical breakdown or even damage it.

Bifilar coils impose an inductance in the common mode, but impose no inductance in the differential mode. Coils in such a combination are widely used to eliminate ingress or egress of common mode signals from electronic signalling circuits. This arrangement is used in transmission and reception magnetics of Ethernet cables [1] and conspicuously in the form of a ferrite bead clamped to the outside of USB, laptop power supply and HDMI cables.

http://upload.wikimedia.org/wikipedia/commons/thumb/e/e2/Bifilar_wound_toroidal_transformer.jpg/220px-Bifilar_wound_toroidal_transformer.jpg


________________________________

Hey the computer geeks stole tesla's stuff (but made it better?)


"Vortex-Based Mathematics you will be able to see how energy is expressing itself mathematically."

Exactly the way it was meant to be...:yes4:



"Mathematics as we know it today is only a tool to symbolize quantities. It simply and shamelessly helps the greedy king count his coins."

Ain't that the truth...:faint:


"Vortex-Based Mathematics (VBM) is completely different because it is a dynamic math that shows the relationships and thus the qualities of numbers rather than the quantities. Within VBM numbers are not symbols that stand for something else, NUMBERS ARE REAL AND ALIVE."



At the age of fifteen Marko Rodin projected his mind as far as he could across the universe and asked the question, "What is the secret behind intelligence?" Due to his gift of intense focus or because it was time for him to know the answer, his stomach muscles turned to iron and as he was literally lifted forward he answered out loud, "I understand." What he had gleaned from his query was that all intelligence comes from a person's name. This led him to understand that not only do our personal names and the language they are spoken in highly affect our personalities but that the most important names are the names of God. This led Marko into a journey of thoroughly studying all the world's great religions. When he was introduced to the Bahai Faith he immediately became a believer. Literally days later Marko decided to take The Most Great Name of Bahaullah (prophet of the Bahai Faith) which is Abha and convert it into numbers. He did this in an effort to discover the true precise mystical intonation of The Most Great Name of God. Since the Bahai sacred scripture was originally written in Persian and Arabic Marko used the Abjad numerical notation system for this letter to number translation. This was a sacred system of allocating a unique numerical value to each letter of the 27 letters of the alphabet so that secret quantum mechanic physics could be encoded into words. What Marko discovered was that (A=1, b=2, h=5, a=1) = 9. The fact that The Most Great Name of God equaled 9 seemed very important to him as everything he had read in both the Bahai scriptures and other religious text spoke of nine being the omni-potent number. So next he drew out a circle with nine on top and 1 through 8 going around the circle clockwise. Then he discovered a very intriguing number system within this circle. Marko knew he had stumbled upon something very profound. This circle with its hidden number sequence was the "Symbol of Enlightenment."

This is the MATHEMATICAL FINGER PRINT OF GOD...

http://img.photobucket.com/albums/v303/wreckless13/Vortex%20Math/Symbol_Of_Enlightenment_Aet.gif


That is because it is a vector. The 1,2,4,8,7,5 is the third dimension while the oscillation between the 3 and 6 demonstrates the fourth dimension, which is the higher dimensional magnetic field of an electrical coil. The 3, 9, and 6 always occur together with the 9 as the control. In fact, the Yin/Yang is not a duality but rather a trinary. This is because the 3 and 6 represent each side of the Yin/Yang and the 9 is the "S" curve between them. Everything is based on thirds. We think that the universe is based on dualities because we see the effects not the cause.


http://rense.com/RodinAerodynamics_files/Yin_Yang.gif

You can literally go through that entire article and visualize (Infinity) in its perfect form...:yes4:

Thanks for the Tip, Tesla...:thumb:

[Nick Matkin]

Very nicely constructed coil there in the video. But it didn't explain what was special about what was going on.

Correct me if I'm wrong, but from the equipment and description a 750 watt power supply was powering a 600 watt audio amplifier that had a square-wave input of variable frequency. The amp output was driving the coil which appeared to contain a spinning ball-bearing in the centre - a form of synchronous motor if I'm not mistaken.

As Tesla-WTC explains, bifiliar (and trifilar) toroidal transformers are commonly used components in electronics. I have wound many for RF matching circuits, oscillators and filters. Good linear power supplies contain toroidal transformers because the magnetic field is contained almost entirely within the toroid, they are self screening and are more efficient than other types of transformer.

What is unusual about the video?

Thanks.

Nick

[GlassSteagallfan]

A bit off topic...

For present 'Free Energy' in the public domain, google Bedini SG.

If you learn and understand the principles of the circuit, you can go off-grid. The applications are limited to your imagination.

[Tesseract]

This looks like an interesting device, however I am long past getting tired of glorified electromagnets being presented as free energy machines.

[13th Warrior]

As far as I know, no one has perfected the use/operation of the rodin coil...

The important discovery is Rodin's Vortex Based Mathimatics.

The major stumbling block is Marko's inability to get people to truly understand what he's discovered and applying this knowledge to making something usefull...

P.S. There is a thread on Avalon, with a video of Marko Rodin explaning his vortex based mathematics...it's received disturbingly little attention...

[meat suit]

As far as I know, no one has perfected the use/operation of the rodin coil...

The important discovery is Rodin's Vortex Based Mathimatics.

The major stumbling block is Marko's inability to get people to truly understand what he's discovered and applying this knowledge to making something usefully...

yeah, I made a few rodin and starship coils at the time whenj everybody was getting out of hho and looking for the next big thing... as pretty as they are, they dont really seem to do anything useful...

[Nick Matkin]

As far as I know, no one has perfected the use/operation of the rodin coil...

The important discovery is Rodin's Vortex Based Mathematics.

The major stumbling block is Marko's inability to get people to truly understand what he's discovered and applying this knowledge to making something useful...

P.S. There is a thread on Avalon, with a video of Marko Rodin explaining his vortex based mathematics...it's received disturbingly little attention...

Perhaps it's not drawn as much attention as he thinks it deserves simply because he hasn't shown it doing anything a conventional toroid doesn't do.

Get it to do something impressive, and whether people understand his "vortex based mathematics" or not, they'll be interested.

But at the moment I'm with Tesseract above. To me it just looks like another type of inductor...

Nick

[Patrikas]

I couldnt agree more ,

anyone interested in a good working system which works and will get you off grid if you understand it and want to build it "which will cost money " so its not free " john Bedini,s systems work .

Theres hundreds of hours in videos he has made on many subjects , including tech that will probably make you batteries last a lifetime ...

heres a link to his forum which anyone can join
http://www.energyscienceforum.com/forum.php

[13th Warrior]

As far as I know, no one has perfected the use/operation of the rodin coil...

The important discovery is Rodin's Vortex Based Mathematics.

The major stumbling block is Marko's inability to get people to truly understand what he's discovered and applying this knowledge to making something useful...

P.S. There is a thread on Avalon, with a video of Marko Rodin explaining his vortex based mathematics...it's received disturbingly little attention...

Perhaps it's not drawn as much attention as he thinks it deserves simply because he hasn't shown it doing anything a conventional toroid doesn't do.



Get it to do something impressive, and whether people understand his "vortex based mathematics" or not, they'll be interested.

But at the moment I'm with Tesseract above. To me it just looks like another type of inductor...

Nick

Marko didn't design the coil; the coil is someone else's design based on Marko's mathematics theory.

Marko is a mystic not an engineer; he can't translate his vision into a nuts and bolts device.

His discovery has far greater potential...

[13th Warrior]

By the way; the current rodin coils are field generators.

[Tesla_WTC_Solution]

Did you guys check out the CERN ATLAS project?

It's a toroidal device, maybe not built the same as copper windings around iron,
but the shape and function seem similar.

@_@

But CERN won't tell us commoners what they are trying to do!


The ATLAS collaboration, the group of physicists who built and now run the detector, was formed in 1992 when the proposed EAGLE (Experiment for Accurate Gamma, Lepton and Energy Measurements) and ASCOT (Apparatus with Super Conducting Toroids) collaborations merged their efforts to build a single, general-purpose particle detector for the Large Hadron Collider.[4] The design was a combination of the two previous experiments, and also benefitted from the detector research and development that had been done for the Superconducting Supercollider. The ATLAS experiment was proposed in its current form in 1994, and officially funded by the CERN member countries in 1995. Additional countries, universities, and laboratories joined in subsequent years, and further institutions and physicists continue to join the collaboration even today. Construction work began at individual institutions, with detector components then being shipped to CERN and assembled in the ATLAS experiment pit from 2003.

Construction was completed in 2008 and the experiment detected its first single beam events on 10 September of that year.[5] Data taking was then interrupted for over a year due to an LHC magnet quench incident. On 23 November 2009, the first proton-proton collisions occurred at the LHC, at a relatively low injection energy of 450 GeV per beam. These collisions were successfully registered in ATLAS, which has been logging data ever since. All the while LHC energy has been increasing: 900 GeV per beam at the end of 2009, 3,500 GeV for the whole of 2010 and 2011 and finally 4,000 GeV per beam in 2012. After a Long Shutdown in 2013 and 2014 the accelerator will increase to 14,000 GeV.

rodin's toroid:


The Rodin Coil



The Rodin Coil is a toroidal—or doughnut-shaped—form wound by wires in a pattern consistent with the number patterns discovered by Mr. Rodin. Toroidal shapes wound with wires are commonly used for inductors in electrical circuits, often for use in transformers. However the pattern of winding in a Rodin Coil is radically different from conventional toroidal coils. Experimenters have produced some samples of the Rodin Coil to measure the effects of this new approach to winding wires around a torus.



To understand these effects it is necessary to review just a little electrical theory. When a current is passing through a wire it creates a magnetic field around the wire. When a wire is coiled like a cylindrical spring, as though wrapped around a pencil, the magnetic fields from the turns of the coil reinforce each other to increase the strength of the magnetic field. When the coil is bent into a circle, so that the ends meet, the majority of the magnetic force is concentrated inside the coil. This is considered a benefit in electrical circuit design, since stray magnetic fields can upset the operation of other parts of the circuit.



In a conventional coil the windings lay one after another just like the windings of a cylindrical spring. In a Rodin Coil, the windings lie on the surface of the torus, but do not lie consecutively adjacent to each other. Instead they reach along the surface, through the central, doughnut hole area, and 30 degrees short of directly across the torus. This forms, in addition to the wires on the outer surface, a crisscrossing circle of wires in the center of the torus. (The central figure formed by the wires in the doughnut hole is really a polygon of 24 sides for each completed wrap of the coil: so many sides it is considered a circle.)



Due to the central circle of wires in a Rodin Torus, it naturally creates a greatly increased magnetic field in the center of the torus, when compared to a conventional coil wound with the same amount of wire. In addition the field generated is much more coherent, in the sense of being much more sensitive to a particular frequency of applied current. These properties are the basis for useful applications of the Rodin Coil, as well as for any limitations in its use.



All this having been said, it is worth noting that no one has as yet created a coil precisely conforming to Mr. Rodin’Äôs exacting recommendations, all of which derive from the numerical patterns he has discovered in the decimal number system. The effects of a really well constructed Rodin Coil remain untested.

[13th Warrior]

Please note: all the rodin coils i've seen have an air core.

Let me know if you find any made with an iron core?

[Tesla_WTC_Solution]

Please note: all the rodin coils i've seen have an air core.

Let me know if you find any made with an iron core?

Here they said it didn't work as well: sorry about that lol!

http://www.seri-worldwide.org/id117.html


Motors
The increase in magnetic field over a conventional coil that is found with a Rodin Coil has been observed to be limited if the hollow torus is replaced by the ferrite core used in conventional electric motors. The reason is that the ferrite core reaches magnetic saturation, beyond which no additional magnetic field can be produced. Assuming this difficulty can be overcome by judicious choice of core materials, or that hollow cores can produce enough current, a motor based on the Rodin Coil could be markedly more efficient at generating electrical energy than a conventionally constructed electric motor. (The possibility of a hollow core electric motor is exciting due to the light weight of such a design.) Under this assumption, Rodin Coil motors would be useful in any application where energy consumption must be limited, such as marine, caravan, and space environments where available power sources are restricted; high pollution zones where fossil fuel consumption must be conserved; isolated or unmanned stations with limited fuel capacity and refueling difficulties; and portable motor-driven equipment of every description where battery weight is an issue.

http://en.wikipedia.org/wiki/Saturation_(magnetic)


Seen in some magnetic materials, saturation is the state reached when an increase in applied external magnetic field H cannot increase the magnetization of the material further, so the total magnetic flux density B levels off. It is a characteristic particularly of ferromagnetic materials, such as iron, nickel, cobalt and their alloys.

Removing this center point seemed to remove some of the barricades to generating a stronger field... iirc

[pleadesman]

its a very interesting idea, a spiritual mathematical coil. Not based on any known physics, and the instructions for it are to build some and make it do something. Well, thats a little vague for an EE. It is a very pretty coil so it would be nice if it did something. Actually, I do know a few things, one or two probably, the the videos I saw showed some fifth dimensional energy at a distance effects. So I dont think they were faked because first you would have to know why energies would behave like that in the first place, and we dont know that. Well, some of us understand that a little I think. So it has promise, but of what? There are no instructions on how to build anything at all with one. So we are left to wonder. Or wander. I would call it, half an invention. Anyone care to figure out what the other half looks like? So much for channelled information, a little is useful, a lot is not.

[Tesla_WTC_Solution]

Schematische Darstellung der angestrebten Form des Plasmas (gelb) mit dem Verlauf einer (beispielhaften) magnetischen Feldlinie auf der Plasmaoberfläche (grün) und des dafür erforderlichen Magnetspulensystems (blau)
http://upload.wikimedia.org/wikipedia/commons/thumb/b/b3/W7X-Spulen_Plasma_blau_gelb.jpg/220px-W7X-Spulen_Plasma_blau_gelb.jpg

http://en.wikipedia.org/wiki/Wendelstein_7-X

Wendelstein 7-X is an experimental stellarator (nuclear fusion reactor) currently being built in Greifswald, Germany by the Max-Planck-Institut für Plasmaphysik (IPP), which will be completed by 2015. It is a further development of Wendelstein 7-AS. The purpose of Wendelstein 7-X is to evaluate the main components of a future fusion reactor built using stellarator technology, even if Wendelstein 7-X itself is not an economical fusion power plant.

Wendelstein 7-X, when finished, will be the largest fusion device created using the stellarator concept. It is planned to operate with up to 30 minutes of continuous plasma discharge, demonstrating an essential feature of a future power plant: continuous operation.

The research facility is an independent partner project with the University of Greifswald.


Wendelstein 7-X is mainly a toroid, consisting of 50 non-planar and 20 planar superconducting magnetic coils, 3.5 m high, which induce a magnetic field that prevents the plasma from colliding with the reactor walls. The 50 non-planar coils are used for adjusting the magnetic field.

The main components are the magnetic coils, cryostat, plasma vessel, divertor and heating systems.

The coils are arranged around a heat insulating cladding which is 16 meters in diameter called the cryostat. A cooling device produces enough liquid helium to carry away 5,000 watts of heating power to cool down the magnets and their enclosure (about 425 metric tons) to superconductivity temperature. The plasma vessel, built of 20 parts, is on the inside, adjusted to the complex shape of the magnetic field. It has 299 holes for plasma heating and observation diagnostics. The whole plant is built of 5 almost identical modules, which are assembled in the experiment hall.

The heating system includes 10 megawatts of microwaves, for up to 10 seconds, and can deliver 1 megawatt for 50 seconds during operational phase 1 (OP-1). For operational phase 2 (OP-2), after completion of the full armor/water-cooling, up to 8 megawatts of neutral beam injection will also be available for 10 seconds, while the microwave system will be extended to true steady state (30 minutes).

Its completion originally expected in 2006, an eight-year schedule slip pushed this date out to 2014. After a period of vessel leak-checking, beginning in the summer of 2014, the cryostat will be put under vacuum, and magnet testing will begin in the fall of 2014. The first plasma tests are scheduled to begin during operational phase 1 (OP-1) in spring 2015. [1] [2] On 16 November 2011, the last module of the stellarator's cryostat was lifted into place. [3] A three-lab US-American consortium (Princeton, Oak Ridge, and Los Alamos) is also now a partner in the project, paying 7.5 Mio Euro out of the projected total cost of 1.06 billion Euro, less than 1%. [4] Recently, Princeton University and the Max Planck Society announced a new joint research center in plasma physics,[5] which also will include research on the W7-X stellarator.



http://upload.wikimedia.org/wikipedia/commons/thumb/8/87/W7-X_Stellarator_Experiment.jpg/776px-W7-X_Stellarator_Experiment.jpg


http://www.mpg.de/841548/forschungsSchwerpunkt2?c=166544

http://www.mpg.de/841591/zoom.jpeg


NsJ45P0iybE

coznZbYp190


FLirOvTSLYA