WhiteLove
23rd July 2015, 09:59
Just want to give a shout out to all truth seekers out there. There is an awful lot of content removed from YouTube and a lot of content left unindexed and not possible to find through searches due to the new feature of "private key" (you need to know the exact url to find the video). When you find something of great truth value, do what you can to get a copy of it before it is removed. Humanity must be authorized access to the truth. Else it will be goodbye to this world...
GmrGZJXGyk8
The above video (which as you can see has been removed) - which is quite incredible - contains a detailed explanation by Bashar how a UFO works. I just want to remind you all about the details of that, in case you want to look it up, or in case you have not seen it.
The UFO is a solid state object, it does not have any moving parts, it is just an object that is enveloped by a toroidal electromagnetic energy field. The principle of how this solid state UFO operates is by controlling the electromagnetic energy field around the object by dynamically tuning/adjusting the components behind how this electromagnetic energy field is formed:
A) Power level
B) Frequency
C) Direction of the magnetic energy flow
D) Direction of the electrical energy flow
In regards to the details behind what are the various possible configurations of C and D above, Bashar explains that at least these configurations are used (the electromagnetic energy power pole sits at the vertical and horizontal center of the UFO, in other words at the center point of the volume of the craft, like a shallow tube connected at the rims at the top and the bottom):
1) Vertical rotation (around the craft) in a ring formation clockwise
2) Vertical rotation (around the craft) in a ring formation counter-clockwise
3) Horizontal rotation (around the craft) in a ring formation from top to bottom
4) Horizontal rotation (around the craft) in a ring formation from bottom to top
5) Stays perfectly still
These are adjusted while the UFO travels from point to point - travelling based on an effect Bashar calls "the isolation field effect" - the fact that a particular electromagnetic energy field can only exist at a single unique point of location in creation. That particular electromagnetic energy field signature is the power level of the electromagnetic energy field. Therefore, all coordinates in creation can be traced to a given electromagnetic energy power level.
In order to be able to travel here from a distant galaxy, they tune the frequency of the electromagnetic energy field so that it vibrates precisely at the same frequency as the threshold frequency between the physical and the non-physical dimensions, which they have discovered is 333 000 Hz. When the electromagnetic power level at 333 000 Hz, exactly exactly balances and matches the total energy contained in the mass of the craft (E = m * c^2, mass is energy), the craft is totally massless and instantly moves to the target location by tunneling through the non-physical dimension. Hence the UFOs are made to be thin using a very strong material and with as low inherent mass as possible, such that they don't have to add unnecessary extra power to make it work. Bashar says that they hence don't have to add so much power to make it work.
The electromagnetic force is defined by Lorentz force law as:
Fem = Felec + Fmagn
F = q * E + (q * v x B)
where E is the electric field and B is the magnetic field.
GmrGZJXGyk8
The above video (which as you can see has been removed) - which is quite incredible - contains a detailed explanation by Bashar how a UFO works. I just want to remind you all about the details of that, in case you want to look it up, or in case you have not seen it.
The UFO is a solid state object, it does not have any moving parts, it is just an object that is enveloped by a toroidal electromagnetic energy field. The principle of how this solid state UFO operates is by controlling the electromagnetic energy field around the object by dynamically tuning/adjusting the components behind how this electromagnetic energy field is formed:
A) Power level
B) Frequency
C) Direction of the magnetic energy flow
D) Direction of the electrical energy flow
In regards to the details behind what are the various possible configurations of C and D above, Bashar explains that at least these configurations are used (the electromagnetic energy power pole sits at the vertical and horizontal center of the UFO, in other words at the center point of the volume of the craft, like a shallow tube connected at the rims at the top and the bottom):
1) Vertical rotation (around the craft) in a ring formation clockwise
2) Vertical rotation (around the craft) in a ring formation counter-clockwise
3) Horizontal rotation (around the craft) in a ring formation from top to bottom
4) Horizontal rotation (around the craft) in a ring formation from bottom to top
5) Stays perfectly still
These are adjusted while the UFO travels from point to point - travelling based on an effect Bashar calls "the isolation field effect" - the fact that a particular electromagnetic energy field can only exist at a single unique point of location in creation. That particular electromagnetic energy field signature is the power level of the electromagnetic energy field. Therefore, all coordinates in creation can be traced to a given electromagnetic energy power level.
In order to be able to travel here from a distant galaxy, they tune the frequency of the electromagnetic energy field so that it vibrates precisely at the same frequency as the threshold frequency between the physical and the non-physical dimensions, which they have discovered is 333 000 Hz. When the electromagnetic power level at 333 000 Hz, exactly exactly balances and matches the total energy contained in the mass of the craft (E = m * c^2, mass is energy), the craft is totally massless and instantly moves to the target location by tunneling through the non-physical dimension. Hence the UFOs are made to be thin using a very strong material and with as low inherent mass as possible, such that they don't have to add unnecessary extra power to make it work. Bashar says that they hence don't have to add so much power to make it work.
The electromagnetic force is defined by Lorentz force law as:
Fem = Felec + Fmagn
F = q * E + (q * v x B)
where E is the electric field and B is the magnetic field.