WhiteLove
23rd January 2016, 09:49
5RKdgweo0vo
Here is another video:
SFB0aySrB2s
At first I thought it was fake, but it might be that the "generator" becomes some kind of temporary storage of energy. So it is not "free energy" because there is no overunity in it, but it becomes some kind of energy container that is charged quickly. I wonder how much energy was drawn from the original battery by just quickly connecting it to that "generator", that one could measure. But in operation that energy in the energy container is gradually consumed is my theory on it. Until there is no more energy in it.
To make this into "real free energy without overunity", one would have to capture the released energy from the lamp, then keep feeding that energy back into the generator, causing an infinite loop of energy circulation. And for that process of capturing the energy from the air, one might possibly be able to use an RF antenna, is my theory. How easy it is to constantly keep capturing 100% of the released energy I don't know, that appears challenging, but maybe it is possible somehow. But still at that point it's not really overunity, because there is a certain fixed amount of electricity constantly within the loop. For overunity you need a certain amount of charge amplification within the infinite loop and then to not blow up the device you need to consume the energy also, so you need some kind of tapping mechanism, which is that it is at constant charge level first, meaning the electricity flows in an infinite loop within the system at a fixed energy level. Then once you "tap" energy from it, it's like opening a gate when the loop no longer stays at a fixed energy rate but is amplified by as much as the energy you tap from it. That is real free energy - a device that is in constant "on" mode, until you open the gate to draw energy from it, at which point amplification of the energy within the system is triggered. And that gate must be made so that the amplification is in a 1:1 ratio between the amount of energy drawn from the system and the amount of energy amplified within the system, so that how much of the energy you can draw from it is only limited by the materials/construction/design of the device.
A theory I have of how overunity could be possible is to make two fixed charges at precise frequency of opposite polarity being 180 degrees out of phase relative to each other. The overunity is then made possible by bringing in a third component that puts the two charges into phase. That process of aligning the phase of the two identical frequencies I think can cause infinite amplification, because I think it makes the combined frequency accelerating up to infinity at that particular state. And so when doing so in electrical terms it would cause an infinite amplification of electrical energy. Left is to learn to control this, so that you don't blow up the device.
A philosophical question would then be, but where would that energy originate from? The answer would then be, it already is, it's just that it does not leak into our density before a certain geometrical/frequency pattern/state is created, which becomes a conduit - a connection point/density gate - between a particular density in creation and the infinite sea of energy it exists in. That is similar to this: we are all unconditional love, but we exist in a limited form of that infinite unconditional love until we form an unconditional love trinity, at which point we pass from a limited energy form and state into an infinite unlimited energy form and state.
So from my perspective, what is missing in the above videos is the work with frequency, polarity, phase, amplification, energy looping strategies etc. You need to have something that really produces overunity and that you can control through a tapping mechanism - you amplify the energy within the infinite loop by as much as the amount of energy you extract from the system.
The steps to free energy:
1. Learn to create an infinite loop of energy within a system at a fixed energy level
2. Learn to create energy amplification of the energy within the system
3. Learn to create an electrical gate that controls the amplification of the energy within the system by dynamically amplifying the energy by as much energy as is drawn from it
4. Optimize the choice of materials, construction, design of the device to maximize the amount of energy that can flow through/be tapped from the system
5. Find smart ways of distributing the energy and smart devices in various formats that can be safely used for various applications
Here is another video:
SFB0aySrB2s
At first I thought it was fake, but it might be that the "generator" becomes some kind of temporary storage of energy. So it is not "free energy" because there is no overunity in it, but it becomes some kind of energy container that is charged quickly. I wonder how much energy was drawn from the original battery by just quickly connecting it to that "generator", that one could measure. But in operation that energy in the energy container is gradually consumed is my theory on it. Until there is no more energy in it.
To make this into "real free energy without overunity", one would have to capture the released energy from the lamp, then keep feeding that energy back into the generator, causing an infinite loop of energy circulation. And for that process of capturing the energy from the air, one might possibly be able to use an RF antenna, is my theory. How easy it is to constantly keep capturing 100% of the released energy I don't know, that appears challenging, but maybe it is possible somehow. But still at that point it's not really overunity, because there is a certain fixed amount of electricity constantly within the loop. For overunity you need a certain amount of charge amplification within the infinite loop and then to not blow up the device you need to consume the energy also, so you need some kind of tapping mechanism, which is that it is at constant charge level first, meaning the electricity flows in an infinite loop within the system at a fixed energy level. Then once you "tap" energy from it, it's like opening a gate when the loop no longer stays at a fixed energy rate but is amplified by as much as the energy you tap from it. That is real free energy - a device that is in constant "on" mode, until you open the gate to draw energy from it, at which point amplification of the energy within the system is triggered. And that gate must be made so that the amplification is in a 1:1 ratio between the amount of energy drawn from the system and the amount of energy amplified within the system, so that how much of the energy you can draw from it is only limited by the materials/construction/design of the device.
A theory I have of how overunity could be possible is to make two fixed charges at precise frequency of opposite polarity being 180 degrees out of phase relative to each other. The overunity is then made possible by bringing in a third component that puts the two charges into phase. That process of aligning the phase of the two identical frequencies I think can cause infinite amplification, because I think it makes the combined frequency accelerating up to infinity at that particular state. And so when doing so in electrical terms it would cause an infinite amplification of electrical energy. Left is to learn to control this, so that you don't blow up the device.
A philosophical question would then be, but where would that energy originate from? The answer would then be, it already is, it's just that it does not leak into our density before a certain geometrical/frequency pattern/state is created, which becomes a conduit - a connection point/density gate - between a particular density in creation and the infinite sea of energy it exists in. That is similar to this: we are all unconditional love, but we exist in a limited form of that infinite unconditional love until we form an unconditional love trinity, at which point we pass from a limited energy form and state into an infinite unlimited energy form and state.
So from my perspective, what is missing in the above videos is the work with frequency, polarity, phase, amplification, energy looping strategies etc. You need to have something that really produces overunity and that you can control through a tapping mechanism - you amplify the energy within the infinite loop by as much as the amount of energy you extract from the system.
The steps to free energy:
1. Learn to create an infinite loop of energy within a system at a fixed energy level
2. Learn to create energy amplification of the energy within the system
3. Learn to create an electrical gate that controls the amplification of the energy within the system by dynamically amplifying the energy by as much energy as is drawn from it
4. Optimize the choice of materials, construction, design of the device to maximize the amount of energy that can flow through/be tapped from the system
5. Find smart ways of distributing the energy and smart devices in various formats that can be safely used for various applications