+ Reply to Thread
Results 1 to 11 of 11

Thread: How to make a DIY PEMF Machine for Cheap

  1. Link to Post #1
    Aaland Avalon Member Blastolabs's Avatar
    Join Date
    3rd November 2020
    Language
    English
    Posts
    442
    Thanks
    1,649
    Thanked 3,352 times in 432 posts

    Default How to make a DIY PEMF Machine for Cheap

    PEMF = Pulsed Electro Magnetic Frequency
    Click image for larger version

Name:	IMG_20210331_130843_908.jpg
Views:	86
Size:	578.2 KB
ID:	46450

    It has been FDA approved to heal broken bones, treat depression, and more although it likely has MANY more uses.

    ------Insert PEMF studies here-----

    What a PEMF machine does is it Pulsed electricity through a coil which created a magnetic field.

    The actual REASON and mechanism that makes it work is UNKNOWN

    A spinning magnet also creates a Pulsed EM field but DOES NOT work.

    This means that pulsing electricity through a coil creates some kind of field that is currently unknown to mainstream science.



    Ok. So we need to pump voltage to either end of a coil of wire of and on.

    [B]EASY[/B

    All speakers are simply coils of wire that we send electricity through.


    Step 1


    Get a coil of 12-18 gauge copper wire Magnet Wire
    It HAS to be magnet wire which is coated or else it will not work.
    Wrap the coil so looks about like the size of the one in the picture

    Step 2

    Solder an audio input jack to the coil.
    One side goes to ground, the other side goes to tip

    Step 3

    Use any audio amplifier

    The bigger the better. I just got a 600watt car stereo amplifier of shop goodwill for $25


    Step 4

    Plug the coil into the OUTPUT of the audio amplifier with an standard audio cable.
    Plug a cell phone or computer into the input of audio amplifier


    Use any waveform generator phone app to generate square waves at whichever frequency you want.

    Pulse Width modulation can be useful to get the best results.


    With this setup I am currently getting 1500 - 2000 micro telsa.



    I make little electronic devices that send frequencies instead of the phone that have a little screen where you can select the ailment to chose a frequency but the phone works fine in a pinch.



    Companies charge $2,000-10,000 for these devices when all they are is a crappy synthesizer plugged into an audio amplifier


    Will lost pictures in a few
    Last edited by Blastolabs; 31st March 2021 at 19:16.

  2. The Following 24 Users Say Thank You to Blastolabs For This Post:

    Alan (1st April 2021), Anna70 (16th April 2021), Bill Ryan (1st April 2021), EFO (31st March 2021), Ernie Nemeth (16th April 2021), ExomatrixTV (2nd April 2021), Harmony (1st April 2021), Hym (31st March 2021), iota (31st March 2021), Journeyman (1st April 2021), meat suit (31st March 2021), Mike (31st March 2021), Nasu (31st March 2021), onawah (31st March 2021), onevoice (1st April 2021), palehorse (20th August 2021), Snoweagle (1st April 2021), Sue (Ayt) (1st April 2021), the_real_dave-id (7th April 2021), TomKat (31st March 2021), toppy (1st April 2021), Trisher (1st April 2021), Tyy1907 (31st March 2021), yelik (31st March 2021)

  3. Link to Post #2
    Aaland Avalon Member Blastolabs's Avatar
    Join Date
    3rd November 2020
    Language
    English
    Posts
    442
    Thanks
    1,649
    Thanked 3,352 times in 432 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    Other pics, couldn't attach for some reason Click image for larger version

Name:	IMG_20210331_130926_931.jpg
Views:	50
Size:	673.1 KB
ID:	46451

  4. The Following 12 Users Say Thank You to Blastolabs For This Post:

    Bill Ryan (1st April 2021), EFO (31st March 2021), Harmony (1st April 2021), Hym (31st March 2021), Mike (31st March 2021), Nasu (31st March 2021), onawah (31st March 2021), palehorse (20th August 2021), Snoweagle (1st April 2021), toppy (1st April 2021), Trisher (1st April 2021), yelik (31st March 2021)

  5. Link to Post #3
    Romania Avalon Member EFO's Avatar
    Join Date
    13th May 2016
    Language
    Romanian
    Age
    54
    Posts
    1,776
    Thanks
    13,329
    Thanked 11,568 times in 1,716 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    Cool and cheap stuff Blasto!

    I have a question:how many spires have your coil?Many thanks.

    Add the rest of the photos on Avalon Discord.
    "Your planet is forbidden for an open visit - extremely aggressive social environment,despite almost perfect climatic conditions.Almost 4 billion violent deaths for the last 5000 years and about 15000 major military conflicts in the same period."

  6. The Following 8 Users Say Thank You to EFO For This Post:

    Alan (1st April 2021), Bill Ryan (1st April 2021), Harmony (1st April 2021), Hym (31st March 2021), Nasu (31st March 2021), onawah (31st March 2021), toppy (1st April 2021), Trisher (1st April 2021)

  7. Link to Post #4
    Wales Avalon Member meat suit's Avatar
    Join Date
    1st January 2012
    Location
    on the coast
    Language
    German
    Age
    58
    Posts
    983
    Thanks
    5,737
    Thanked 5,006 times in 904 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    Quote Posted by EFO (here)
    Cool and cheap stuff Blasto!

    I have a question:how many spires have your coil?Many thanks.

    Add the rest of the photos on Avalon Discord.
    yes, great stuff Blasto, easy to make,
    how do you choose frequencies and how do you apply the device to yourself?
    how often and for how long do you treat yourself?

  8. The Following 9 Users Say Thank You to meat suit For This Post:

    Alan (1st April 2021), Bill Ryan (1st April 2021), EFO (1st April 2021), Harmony (1st April 2021), Hym (31st March 2021), Nasu (31st March 2021), onawah (31st March 2021), toppy (1st April 2021), Trisher (1st April 2021)

  9. Link to Post #5
    Aaland Avalon Member Blastolabs's Avatar
    Join Date
    3rd November 2020
    Language
    English
    Posts
    442
    Thanks
    1,649
    Thanked 3,352 times in 432 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    I've made a bunch of coils.
    It seems like using thicker wire helps.

    The coil in the photo is about an inch and a half thick.
    It really pumps out the magnetism. Up to 2000 micro-teslas

    I use it for pain and to meditate.
    20hz to meditate
    8hz for pain

    I've been using this chart.

    https://www.pemfsupply.com/pages/frequency


    PEMF uses healthy electromagnetic frequencies, as opposed to cell phone frequencies, to enhance overall health and wellness. Every cell in the body has a negative charge on the cell wall. For nerve cells, this is approximately -60 mV; other cells may vary in the net negative charge. To maintain healthy levels of this negative charge, potassium and magnesium should be contained inside the cells, while calcium and sodium ideally remain outside the cells.

    Obviously, there are scores of fundamentals—vitamins, minerals, hormones—that must be maintained at an optimal level for cell health. The pH of the blood, normally 7.4, is, of course, essential, as are significant excesses or deficiencies of nutrients; and numerous toxins must also be kept at bay. While all these factors play an important role in cell health, the electrical health of cells is one of the most critical of all the vital elements.


    A bunch of studies can be found
    https://www.drpawluk.com/category/pemf-studies/
    https://pubmed.ncbi.nlm.nih.gov/20329696/
    https://www.nature.com/articles/s41598-017-14983-9

  10. The Following 15 Users Say Thank You to Blastolabs For This Post:

    Bill Ryan (1st April 2021), EFO (1st April 2021), Harmony (1st April 2021), Hym (31st March 2021), Journeyman (1st April 2021), kfm27917 (1st April 2021), meat suit (1st April 2021), Mike (31st March 2021), onawah (31st March 2021), Snoweagle (1st April 2021), Sue (Ayt) (4th February 2022), toppy (1st April 2021), Trisher (1st April 2021), Vangelo (2nd April 2021), yelik (31st March 2021)

  11. Link to Post #6
    UK Avalon Member Journeyman's Avatar
    Join Date
    9th September 2020
    Language
    English
    Posts
    1,171
    Thanks
    5,299
    Thanked 9,212 times in 1,146 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    Thank you for posting this.

  12. The Following 7 Users Say Thank You to Journeyman For This Post:

    Bill Ryan (1st April 2021), Blastolabs (2nd April 2021), Delight (1st April 2021), EFO (1st April 2021), Harmony (1st April 2021), Hym (8th April 2021), toppy (16th April 2021)

  13. Link to Post #7
    New Zealand Avalon Member
    Join Date
    9th March 2017
    Location
    Near the Antarctic
    Posts
    58
    Thanks
    0
    Thanked 523 times in 58 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    Is there any way you could make them and post them to somebody like myself who has lost their handyman and who is a technophobe. I would love one for me and my friend who has a shed load of health problems. We live in NZ.

    ¤=[Post Update]=¤

    Forgot to mention I would pay you the cost of making and shipping postage as well.

  14. The Following 7 Users Say Thank You to Scorpio Girl For This Post:

    Bill Ryan (7th April 2021), EFO (2nd April 2021), Harmony (8th April 2021), Hym (8th April 2021), onawah (8th April 2021), Phoenix1304 (22nd August 2021), toppy (16th April 2021)

  15. Link to Post #8
    Aaland Avalon Member Blastolabs's Avatar
    Join Date
    3rd November 2020
    Language
    English
    Posts
    442
    Thanks
    1,649
    Thanked 3,352 times in 432 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    I have been thinking of doing this, I think I'm going to order some parts and make a couple at the same time to save time,. I'll keep the forum posted.

    I was reading a book about Remote Viewing I found on Rex Research and in it someone mentions multiple studies that found that PEMF can be used to increase what ever brain wave frequency the PEMF is set to.

    They claim that theta brain waves (4.5 hertz) are more pronounced during remote viewing and that using a PEMF can help amplify these waves.

    My husband was trained in remote viewing from a young age and has proven himself to be very skilled, I put my cheap EEG on him while he remotely viewed and sure enough the theta waves went off the charts for a few minutes.

    Pretty cool, I have a feeling that PEMF machines and similar devices have FAR more potential than "mainstream science" realizes so I would love to get a bunch of them out into the world at a price that makes sense. These things should NOT cost anymore than the cost of a microcontroller ($2 for a NICE one) and an amplifier (price range on these is $10- infinity) depending on how much you want to amplify.

    I do want to point out that ANY traditional stereo system that uses passive speakers can function as the amplifier



    You merely replace the speaker with coil then play square waves through the audio input.

    Like most things in science it sounds complicated until you take the time to truly understand what is going on and it as simple as can be

  16. The Following 11 Users Say Thank You to Blastolabs For This Post:

    Alan (7th April 2021), Anna70 (16th April 2021), Bill Ryan (7th April 2021), EFO (7th April 2021), Harmony (8th April 2021), Hym (7th April 2021), Journeyman (16th April 2021), onawah (8th April 2021), Sunny (7th April 2021), the_real_dave-id (7th April 2021), toppy (16th April 2021)

  17. Link to Post #9
    United States Avalon Member onawah's Avatar
    Join Date
    28th March 2010
    Language
    English
    Posts
    22,209
    Thanks
    47,682
    Thanked 116,102 times in 20,640 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    Please count me in.
    Quote Posted by Scorpio Girl (here)
    Is there any way you could make them and post them to somebody like myself who has lost their handyman and who is a technophobe. I would love one for me and my friend who has a shed load of health problems. We live in NZ.

    ¤=[Post Update]=¤

    Forgot to mention I would pay you the cost of making and shipping postage as well.
    Each breath a gift...
    _____________

  18. The Following 4 Users Say Thank You to onawah For This Post:

    Delight (16th April 2021), Harmony (8th April 2021), Hym (8th April 2021), toppy (16th April 2021)

  19. Link to Post #10
    Avalon Member Delight's Avatar
    Join Date
    12th January 2012
    Posts
    6,081
    Thanks
    8,692
    Thanked 39,308 times in 5,717 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    Thought this should go here. Have not heard it yet....

    Spiritual Technology - The Human Charger - Ion PEMF Photon and Infrared


  20. The Following 2 Users Say Thank You to Delight For This Post:

    Sue (Ayt) (4th February 2022), toppy (16th April 2021)

  21. Link to Post #11
    Aaland Avalon Member Blastolabs's Avatar
    Join Date
    3rd November 2020
    Language
    English
    Posts
    442
    Thanks
    1,649
    Thanked 3,352 times in 432 posts

    Default Re: How to make a DIY PEMF Machine for Cheap

    I'm working on a circuit board as we speak to make 20 or so PEMF devices.

    I realized I made a silly mistake (I'm a musician) and found a MUCH more efficient and cheaper way to amplify the pulsed frequency.

    Since I am a musician first and electronics knowledge was some what new when I wrote the write I over complicated the device by using the giant subwoofer amplifier.


    I've been learning a bunch about electronics sense then, and one day I realized I could replace the expensive and bulky audio amplifier in my first design with a large transistor that functions as a gate.

    Instead of "amplifying" the pulse frequency like you would amplify audio I am now using the pulse frequency to open and close a "gate" that allows ALL of the power of from the power supply into the coil.

    This allows the same control over the frequency and WAY more power to enter the coil, which in turn means a much more powerful magnetic/ scalar pulse.

    I'm getting a 100 times stronger magnetic pulse with a device 10 times smaller and lighter.

    If anyone reading this is somewhat familiar with electricity they will quickly see how silly my previous "musician centric" solution truly was.

    Music device I've been working on in the meantime.

    I designed the circuit board my self on computer and had it manufactured for me, the PEMF device is a bit more simple so shouldn't be too difficult and would allow for "mass production" or at least the ability to make 20+ devices without spending 10 years soldering

    Last edited by Blastolabs; 4th February 2022 at 16:45.

  22. The Following 3 Users Say Thank You to Blastolabs For This Post:

    Hym (4th February 2022), Johan (Keyholder) (4th February 2022), onevoice (5th February 2022)

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts