My Journey with Hydroponics

[Bill Ryan]

Szymon, I have a very general question. (And thanks for all the interesting detail you've posted on this thread!)

Can you say a little about simpler ways to do this? Maybe for someone who doesn't have a workshop and may not be as practically minded or skilled as yourself?

What you're creating is inspiring, but (maybe to some) also a little daunting, just because of the complexity and all the handiwork needed.

I can see that there are easy-to-assemble kits that anyone can order online. Like these:

https://nthydroponics.com/collections/hydroponic-kits

Is your impressive DIY system

• More efficient?
• Cheaper?
• Better adapted to your own needs?
• Simply more fun to build?
  
  

[Szymon]

Posted by Bill Ryan (here)
Szymon, I have a very general question. (And thanks for all the interesting detail you've posted on this thread!)

Can you say a little about simpler ways to do this? Maybe for someone who doesn't have a workshop and may not be as practically minded or skilled as yourself?

What you're creating is inspiring, but (maybe to some) also a little daunting, just because of the complexity and all the handiwork needed.

I can see that there are easy-to-assemble kits that anyone can order online. Like these:

https://nthydroponics.com/collections/hydroponic-kits

Is your impressive DIY system

• More efficient?
• Cheaper?
• Better adapted to your own needs?
• Simply more fun to build?
  
  

Hey Bill,

You're right. I like to over-engineer my projects, so they last several lifetimes. I did the same for the house. I think the easiest method for everyone else is the Kratky method. Get an aquarium air pump for oxygen. Put that in a black, food-safe container. Make 9 holes in the lid. Get a few net cups, or just use a flat piece of foam, cut it into a circle, make a notch in the centre, and fill it with your solution. The roots need to touch the solution. Don't submerge the entire root system, or the plants will drown. No oxygen.

You will still need to get your seedlings started. There are many ways to do this. When your seedlings have developed a root system long enough to touch the solution (about 2 cm), place the seedling into your net cup, fill it with your grow media (I use clay balls), or place it into the notch of your foam and transfer it to the black, food-safe container. Switch on the pump to provide oxygen to the solution, and you should be good to go.

Make sure the water level is right, and the solution is topped up. Make sure your EC and pH levels are spot on for what you are trying to grow.

I will also use the Kratky method to grow, but my focus right now is to get the RDWC method going first.

I suggest waiting until I'm finished with setting up, as I will then show the forum how to set up for the Kratky method. There is not much to it.

Stay tuned. Cheers. Szymon

[Szymon]

Here is a breakdown between the two methods.

The Kratky method and RDWC are both hydroponic growing techniques, but they operate very differently in terms of complexity, cost, and plant performance.

Core difference (simple view)
Kratky = passive, no electricity, “set and forget”
RDWC = active system, uses pumps, high performance
How each system works
Kratky method
Plants sit in a container with nutrient solution.
No pumps, no circulation, no aeration.
As water level drops, roots get exposed to air → natural oxygen supply.
You don’t refill (ideally) during the grow cycle.

Key traits:

Extremely simple
No moving parts
Cheap to set up
Minimal maintenance
RDWC (Recirculating Deep Water Culture)
Multiple buckets or sites connected to a central reservoir.
Water is constantly circulated with a pump.
Air stones supply oxygen to roots continuously.
Nutrients, pH, and temperature are actively managed.

Key traits:

Highly oxygenated root zone
Constant nutrient availability
Requires electricity and monitoring
More complex setup
Major differences side-by-side
Feature Kratky RDWC
System type Passive Active (recirculating)
Electricity ❌ None ✅ Required
Oxygen to roots Air gap (passive) Air pumps + circulation
Maintenance Very low Moderate to high
Cost Very cheap Expensive
Growth speed Moderate Fast
Yield potential Lower High
Risk of failure Low (few parts) Higher (pump failure, etc.)
Performance and use cases

Kratky is best for:

Beginners
Leafy greens (lettuce, spinach, herbs)
Small, low-cost setups
People who want minimal effort

RDWC is best for:

Experienced growers
Large plants (tomatoes, peppers, cannabis)
Maximizing growth rate and yield
Controlled indoor environments
Practical analogy
Kratky is like a plant living off a “static water tank.”
RDWC is like a constantly flowing, oxygen-rich river system.
Bottom line

If you want simple and low effort, go with Kratky.
If you want maximum growth and are okay managing equipment, RDWC is far more powerful.

[Szymon]

Hi Friends,

Here is an update on the RDWC setup. Over the weekend, I painted the wood with 2 coats of undercoat and 2 coats of a Fig Tree colour. The result matches the colour of the shelves I bought a month ago. Today, I cleaned all the pipes inside and outside, glued everything together, and added 2 more pipes with larger net cups. I'm waiting for that shipment to arrive, but it doesn't stop me from completing the project. The last part of this project is to make sure that the 6 taps are connected to the same-diameter hoses on the outflow back to the main holding tank, which is the big black box. I also need to connect the power points to the live power, and I think this project is done.

Here are the photos of the RDWC system.






2 more photos in the next post.

[Szymon]

Last two photos.




The next set of photos should show the RDWC in action with the water flowing. Also, when I finish both of the setups, I will do a cost analysis, and I can tell you straight away that it will be cheaper to do it yourself.

Cheers,
Szymon

[Szymon]

Hi Friends,

Here is an update regarding my RDWC hydroponics setup. As you can see, this setup is now finished. I got the water flowing. Everything is working as expected after a few little adjustments.


This is the air pump supplying the oxygen to the main reservoir.

Power still needs to be connected


As you can see, the netcup has water in it. It is only supposed to touch around 1 cm from the bottom.

Here are the outlet hoses.

See you in the next post.

[Szymon]

Here is the next lot.





Here are some more pictures of the RDWC setup.

Last night I placed 10 small green plants, 3-year-old packet seeds, into my seedling tray. These are Basil, Peppermint, and Rocket. I couldn't believe how small these seeds are.




This is how the seedling setup looks. The light timer is set from 6am to 9pm and switches off until the morning.

[Szymon]

Here is my last post. So this morning I took a look at the seedlings and already can see that there has been some progress from the Basil, on the left hand side.





I've highlighted in red.

Looks good.

Over the next few days, I will start setting up the Kratky method.

Cheers,
Szymon

[Harmony]

Thanks Szymon, wonderful to see your progress and the first little peek of plant growth. Hoping all goes well and we will see how the plants thrive along their journey, it must be quite exciting to see it all come together

[Szymon]

Posted by Harmony (here)
Thanks Szymon, wonderful to see your progress and the first little peek of plant growth. Hoping all goes well and we will see how the plants thrive along their journey, it must be quite exciting to see it all come together

Thanks, Harmony. Now the fun begins. Mixing the solution and making sure the EC and pH levels are top notch. Managing pests, algae, etc. I'm sure I'll have setbacks, but bit by bit I'll get there. I'll post my successes and failures as I go along. Cheers.