Let me clarify.Posted by Carmody (here)
Ok, just did some bits of checking in it's alignment.
it is aligned to the vortex point grid map, the becker-hagens grid map.
it appears to point directly at the adjacent vortex grid point that is to the left of the pyramid's main grid point that the pyramids sit on. (north-top, south-down)
Thus in the scalar energetics integration point, it may be a modifier, a canard of sorts. A stabilizer and modifier for what the pyramids are supposed to be doing, with regard to their correct function, when they where complete and functional. Like the outrigger on a boat, in some ways. Like a weight on a rim for a car tire, there to balance the motional mass out so that it is stable for it's intended (rotational) purpose. Sort of a mix of all of these thoughts, but to balance out or stabilize a dimensional flow system.
http://en.wikipedia.org/wiki/Canard_%28aeronautics%29
the little wing set on the front of this aircraft, that is a 'canard'.
![]()
I do work in these areas. Areas where there is a continual flow through and in systems. You know, the physics of said flow systems. The integration between what could be plasmas and solids in flow systems. Be it solids and RF, or solids and air, and so on. Also, work in optics.
I know what I'm looking at, when it comes to such things. Thus, my 'opinion' is not just pulled out of my butt.
It is an educated guess, based on prior experience in multiple areas, working with similar systems, regarding interactions and controlling the flow/action of said interactions, 'in situ'. (in situation, live-during flow)
Using the aircraft above as an example....could I out-design Burt Rutan in the world of aircraft?
Not a chance.
But.. it is very likely I could walk up to one of his aircraft..look at it for a while..and suggest something that would improve it..from subtly to strongly improved. Then the next week I would come up with even more improvements.
What we seem to have here, is a system of energetics that is flowing and that it may need some subtle correction. like small things added to the front of a car, to help with downforce, under use or flow, at high speed.
Think standing waves, like in a pond (back to the cymatics video again)...but three dimensionally, not just on one plane, like rice dancing on a sheet.
Imagine adding a small weight in a corner or spot on this sheet of steel. how it would screw up the near perfect patterns. How the energies would shift in flow, shape, and directions:
Or like adding weights to a tuning fork, to modify it's frequencies. Like a reed in a horn, or harmonica, or an accordion.
Now, imagine this whole thing being like the sheets above (in the cymatics videos), but as they being only slices of the effect (like slices of an MRI scan), a surface change, as in optics..like so. (this is the pathway of light in an optics system):
Imagine the lens elements on their own acting as reeds or modulators, as they have the energies pass through them. Not just lensing effects but modulation of the energies and modulation of the materials in the point of interaction.
This is happening in real time, with energetics that we cannot see. For example, gravity and so on. We can't see it, but everything ,each individual 'atom' as we like to call it has different interactions..in the same way that differently 'doped' glass, will bend light differently. Doped means glass that has different additives. Which are usually elements and oxides, and so on. this causes the light to bend differently. The coatings on your glasses also modify specific light frequencies in the visual range and direct those frequencies differently than they would be directed, if the glass lenses where not coated.
Coated and uncoated:
A multi-coated lens set, designed to control residual noise and color separation effects. each lens component in the internal set of glass lenses was designed to work with the others and each was designed to work only with their coatings given specific actions and behaviors. then all together, as a set:
In this case, think of the light in the lenses and how it is handled, then go three dimensionally, with regard to thinking of the planet and the items on the surface, as if all of it was transparent and semi-transparent..and it is exactly that.. for dimensional energies, that is.
So all this modulating energy might need an outrigger or modifier, an adjustment, possibly. Like the slight modifier for Cessna wings, or the stall fence on a Mig fighter...:
....which stops them from stalling so harshly when they approach their stall speed. It saves many lives. It is a small strip on the wing, in the correct spot, IIRC. A very slight modification of the aerodynamics, while under flow conditions.
This is what I SUSPECT we are looking at, when we look at this object out in the desert. For when it comes to the energetics of the earth, you'd have to put the right object, in the right spot. Thus I don't really know, but this is, as you might now understand....a fairly educated guess. This is only the surface data or basic information, it is not in any way a complete explanation of the depth of the mechanics of matter-dimensional integration.










