Posted by Carmody
(here)
Posted by Carmody
(here)
Posted by Paul
(here)
Posted by Carmody
(here)
The device 'interferes in each field UNEQUALLY, due to it's component types AND it's construction. Which leads to a resonance state, in the unequally flowing fields. the less turns in a coil, the higher the frequency. The less turns, the lower the electrical and magnetic mass.
the addition of the magnet, across an arc, creates the necessary coupling mass to create a resonance in the fields which has a high enough mass that we can get what we call 'work' or energy from the pair..whereas it would normally be a very tiny and immeasurably small resonance, with just the two coils alone. the dimple in the fields is fairly big, due to the presence of the magnet. yet the wire retains it's low inductive mass, regarding the flow in it, in some critical ways (3d fields and so on) the arc aspect of the magnet ALSO creates the egress part of the flow to occur, as the field propagation in the coil is now unequal due to the arc characteristic. the arc is also critical.
This description seems to cry out for pictures ... a 3D dynamic model of the various fields and such, ideally interactive and modifiable.
That would be a tough one, as we are only now getting to the point where we can image accurately, the flow of an atom.
But, it is interesting to note that the computing power to do so, was finally committed to,and we did it. The deal being that we finally found a programming shortcut, that knocked the required data rates down by a factor of a few number of magnitudes, like a thousand times less calculations required. I'd have to find that article again.....it was about the mathematics of prediction and how we found out a short cut round the older method of brute force and ignorance.
I can visualize it, which is how I manage to 'get there'..but the modelling is a pretty big trick. It's multiple plasma or quantum flows of complex fields and their dynamic integration.
http://en.wikipedia.org/wiki/Magnetohydrodynamics
It is possible to see or understand cooper paired atomic structures..as ...dimensional fulcrums.
Which is why the light speed or propagation speed went toward infinity in this silver material, but seemingly..very little information passed through. yet..it is still there... like that of superconductors in the singular plane, one might say. I mentioned in other places that my understanding is that in a superconductor, with near perfect or perfect zero resistance of electron flow...that time is uniform. Here, light speed is 'violated'. Near infinitely so.
Light hits near infinite speed in silver-coated glass
A nano-sized bar of glass encased in silver allows visible light to pass through at near infinite speed. The technique may spur advances in optical computing.
Metamaterials are synthetic materials with properties not found in nature. Metal and glass have been combined in previous metamaterials to bend light backwards or to make invisibility cloaks. These materials achieve their bizarre effects by manipulating the refractive index, a measure of how much a substance alters light's course and speed.
In a vacuum the refractive index is 1, and the speed of light cannot break Einstein's universal limit of 300,000 kilometres per second. Normal materials have positive indexes, and they transmit at the speed of light in a vacuum divided by their refractive index. Ordinary glass, for instance, has an index of about 1.5, so light moves through it at about 200,000 kilometres per second.
No threat to Einstein
The new material contains a nano-scale structure that guides light waves through the metal-coated glass. It is the first with a refractive index below 0.1, which means that light passes through it at almost infinite speed, says Albert Polman at the FOM Institute AMOLF in Amsterdam, the Netherlands. But the speed of light has not, technically, been broken.
The wave is moving quickly, but its "group velocity" – the speed at which information is travelling – is near zero.
As a feat of pure research, Polman's group did a great job in demonstrating the exotic features of low-index materials, says Wenshan Cai of the Georgia Institute of Technology, who was not involved in the work.
Practical applications might also be in the offing. The metal component that reduces the refractive index also increases absorption, so the light can't travel far, says Polman. Still, the material could be used to transmit light rapidly over the very short distances in optical integrated circuits, he says.
http://www.newscientist.com/article/...ted-glass.html
I'll probably cross post this one into that other thread...
To explain a bit:
The wave is moving quickly, but its "group velocity" – the speed at which information is travelling – is near zero.
Like that of the fulcrum. Almost zero motion, but it is an energetic fulcrum, of sorts. information gets through, but has seemingly no motion, at this translation or transition or dimensional barrier transfer-translation point. Like the lack of motion in materials chilled to absolute zero...like superconductors, or lack of time, or, this nano particle covered with silver, in the article. NEAR zero 'information' is passed through, but it passes nonetheless. What they mean is the fluctuations are squeezed to a near zero, and in consequence, the acceleration moves to near infinity.
The 'change' in the energy or vibration, as it moves into the silver based material, would be like this pair of atomic structures, idealized graphically, as they move into the cooper paired state.
The fields in the magnetic/coil devices, doe the same. the act of the arrangement being like a gate or fulcrum for the highly pressurized or high energy state '3d linear time fields' and the fundamental dimensional energies that it is all made up of, the underlying dimensional fabric, which works at above light speed. And beyond. The magnetic coil device is like a 'drain spiral' that the highly pressurized materials are both enabled to transfer energy through at the same time they are the the source of the resonant oscillation. the pressures are everywhere and in everything, so the object emerges into a constant flow of sub and super light speed resonant oscillation.
In the image, it is like the peak energies are like the fulcrum of dimensional shift of the two integrations..and then beyond it normalizes..but in a flow state. As it comes into it... in a pressurized flow state. (multiple energetic field types are present, ie dark matter and linear 3d recognition and flow - of their companion/related energetics)
The resonance point IS the fluid field state of the solid object, it is the fulcrum and the gate, all at the same time.
Re: Here and Now...What's Happening?
Reply With Quote
Bookmarks